Domain name for API request: trtc.tencentcloudapi.com.
Push an online media stream to the TRTC room.
A maximum of 20 requests can be initiated per second for this API.
The following request parameter list only provides API request parameters and some common parameters. For the complete common parameter list, see Common Request Parameters.
Parameter Name | Required | Type | Description |
---|---|---|---|
Action | Yes | String | Common Params. The value used for this API: StartStreamIngest. |
Version | Yes | String | Common Params. The value used for this API: 2019-07-22. |
Region | Yes | String | Common Params. For more information, please see the list of regions supported by the product. This API only supports: ap-bangkok, ap-guangzhou, ap-jakarta, ap-mumbai, ap-singapore, ap-tokyo. |
SdkAppId | Yes | Integer | TRTC's SdkAppId, the same as the SdkAppId corresponding to the Record room. |
RoomId | Yes | String | TRTC's RoomId, the RoomId corresponding to the Record TRTC room. |
RoomIdType | Yes | Integer | Type of TRTC RoomId. [*Note] Must be the same as the RoomId type corresponding to the Record room: 0: String type RoomId 1: 32-bit Integer type RoomId (default) |
UserId | Yes | String | UserId of the Pull stream Relay Robot, used to enter the room and initiate the Pull stream Relay Task. |
UserSig | Yes | String | UserSig corresponding to the Pull stream Relay Robot UserId, i.e., UserId and UserSig are equivalent to the Robot's Login password for entering the room. For the specific Calculation method, please refer to the TRTC UserSig Scheme. |
StreamUrl | No | String | The Url of the media resource. |
PrivateMapKey | No | String | TRTC room permission Encryption ticket, only needed when advanced permission control is enabled in the Console. After enabling advanced permission control in the TRTC Console, TRTC's backend service system will verify a so-called [PrivateMapKey] 'Permission ticket', which contains an encrypted RoomId and an encrypted 'Permission bit list'. Since PrivateMapKey contains RoomId, providing only UserSig without PrivateMapKey does not allow entry into the specified room. |
SeekSecond | No | Integer | |
AutoPush | No | Boolean | Enable auto relay to cdn, please make sure that this feature has been enabled in the console. |
RepeatNum | No | Integer | Loop playback count, value range: [-1, 1000], default is 1 time. - 0 is an invalid value - -1 is for loop playback, task termination requires actively calling the stop interface or setting MaxDuration. |
MaxDuration | No | Integer | Loop playback maximum duration, only effective when RepeatNum is set to -1, valid value range: [1, 10080], unit: minutes |
Parameter Name | Type | Description |
---|---|---|
TaskId | String | The Task ID of the Pull stream Relay. The Task ID is a unique identifier for a Pull stream Relay lifecycle process, and it loses its meaning when the task ends. The Task ID needs to be saved by the business as a parameter for the next operation on this task. |
RequestId | String | The unique request ID, generated by the server, will be returned for every request (if the request fails to reach the server for other reasons, the request will not obtain a RequestId). RequestId is required for locating a problem. |
Start an Input Online Media Stream Task, input the online media stream "https://a.b/test.mp4" into the TRTC room, use the default Codec values for Audio and Video, and return the TaskId after the Relay is successful.
POST / HTTP/1.1
Host: trtc.tencentcloudapi.com
Content-Type: application/json
X-TC-Action: StartStreamIngest
<common request parameters>
{
"SdkAppId": 1234567890,
"RoomId": "room123",
"UserId": "robot123",
"UserSig": "xxxxxxxxxxxxxxx",
"PrivateMapKey": "xxxxxxxxxxxxxxx",
"RoomIdType": 1,
"StreamUrl": "https://a.b/test.mp4"
}
{
"Response": {
"TaskId": "-gCTFWtU7t7DUlo7A8IswFszO9z2O-rbERqJAoK-4pycoZXKjIAAnasdcasdOEycyX4CnzhIm4RAQ..",
"RequestId": "71993312-6ab8-4768-9124-118e0a20c45f"
}
}
TencentCloud API 3.0 integrates SDKs that support various programming languages to make it easier for you to call APIs.
The following only lists the error codes related to the API business logic. For other error codes, see Common Error Codes.
Error Code | Description |
---|---|
FailedOperation.NotAllowed | |
FailedOperation.NotRtmpFunction | |
FailedOperation.RestrictedConcurrency | Maximum number of concurrent on-cloud recording tasks reached. Contact us to raise the limit. |
FailedOperation.TaskExist | Task already exists |
InternalError.HttpParseFailed | HTTP request parsing failed. |
InternalError.InternalError | Internal error, please retry. |
InvalidParameter.BodyParamsError | Failed to parse body parameters. |
InvalidParameter.RoomId | RoomId is incorrect. |
InvalidParameter.SdkAppId | SdkAppId is incorrect. |
InvalidParameter.StrRoomId | StrRoomId parameter error. |
InvalidParameter.StreamUrl | Invalid StreamUrl format |
InvalidParameter.TaskId | TaskId parameter error. |
InvalidParameter.UserSig | |
MissingParameter.RoomId | RoomId is missing. |
MissingParameter.SdkAppId | SdkAppId is missing. |
MissingParameter.TaskId | TaskId parameter missing. |
ResourceInsufficient.RequestRejection | Insufficient resources. |
この記事はお役に立ちましたか?