tencent cloud

피드백

Speech-to-Text Service

마지막 업데이트 시간:2024-01-18 15:13:51
    This document describes how to integrate with and debug the GME APIs to implement speech-to-text service for Android.
    Note:
    This document applies to GME SDK version 2.9.

    Key Considerations for Using GME

    GME provides voice chat service, voice messaging and speech-to-text services and they rely on core APIs such as Init and Poll.
    Note:
    There is a default call rate limit for speech-to-text APIs. For more information on how calls are billed within the limit, see Purchase Guide. If you want to increase the limit or learn more about how excessive calls are billed, submit a ticket.
    Non-streaming speech-to-text API SpeechToText(): There can be up to 10 concurrent requests per account.
    Streaming speech-to-text API StartRecordingWithStreamingRecognition(): There can be up to 50 concurrent requests per account.
    Voice chat streaming speech-to-text API StartRealTimeASR(): There can be up to 50 concurrent requests per account.
    image
    
    Notes on the Init API
    If you need to use voice chat and voice messaging services at the same time, you only need to call Init API once. The billing will not start after initialization. Receiving or sending a voice message in speech-to-text service is counted as a voice message DAU.

    Directions

    Important notes

    Configure your project before using GME; otherwise, the SDK will not take effect.
    After a GME API is called successfully, QAVError.OK will be returned with the value being 0.
    GME APIs should be called in the same thread.
    The Poll API should be called periodically for GME to trigger event callbacks.
    For detailed error codes, see Error Codes.

    Voice message for Android class

    Class
    Description
    ITMGContext
    Core APIs
    ITMGPTT
    Voice messaging and speech-to-text APIs

    Core APIs

    Before the initialization, the SDK is in the uninitialized status, and you need to initialize it through the Init API before you can use the voice chat and speech-to-text services.
    Call the Init API before calling any APIs of GME.
    If you have any questions when using the service, see General.
    API
    Description
    Init
    Initializes GME.
    Poll
    Triggers an event callback.
    Pause
    Pauses the system.
    Resume
    Resumes the system.
    Uninit
    Uninitializes GME.
    Note:
    If you need to switch the account, please call UnInit to uninitialize the SDK. No fee is incurred for calling Init API.

    Getting singleton

    To use the voice feature, get the ITMGContext object first.

    Sample code

    import com.tencent.TMG.ITMGContext;
    ITMGContext.getInstance(this);

    Registering callback

    The API class uses the Delegate method to send callback notifications to the application. Register the callback function to the SDK for receiving callback messages.

    Function prototype

    Override this callback function in the constructor to process the parameters of the callback.
    static public abstract class ITMGDelegate {
    public void OnEvent(ITMG_MAIN_EVENT_TYPE type, Intent data){}
    }
    Parameter
    Type
    Description
    type
    ITMGContext.ITMG_MAIN_EVENT_TYPE
    Event type in the callback response
    data
    Intent message type
    Callback message, i.e., event data

    Sample code

    Register the callback function to the SDK before room entry.
    private ITMGContext.ITMGDelegate itmgDelegate = null;
    itmgDelegate = new ITMGContext.ITMGDelegate() {
    @Override
    public void OnEvent(ITMGContext.ITMG_MAIN_EVENT_TYPE type, Intent data) {
    if (ITMGContext.ITMG_MAIN_EVENT_TYPE.ITMG_MAIN_EVENT_TYPE_ENTER_ROOM == type)
    {
    // Analyze the returned data
    int nErrCode = data.getIntExtra("result" , -1);
    String strErrMsg = data.getStringExtra("error_info");
    }
    }
    }

    Function prototype

    public abstract int SetTMGDelegate(ITMGDelegate delegate);
    Parameter
    Type
    Description
    delegate
    ITMGDelegate
    SDK callback function

    Sample code

    ITMGContext.GetInstance(this).SetTMGDelegate(itmgDelegate);

    Initializing the SDK

    This API is used to initialize the GME service. We recommend that you call it when initializing the application. No fees are incurred for calling this API.
    For more information on how to get the sdkAppID parameter, see Activating Services.
    openID uniquely identifies a user with the rules stipulated by you. It must be unique in the application and can only be in Int64 type.
    Note:
    The Init API must be called in the same thread with other APIs. It is recommended to call all APIs in the main thread.

    Function prototype

    public abstract int Init(String sdkAppId, String openId);
    Parameter
    Type
    Description
    sdkAppId
    String
    AppId from the GME console
    openId
    String
    OpenId can only be in Int64 type, which is passed in after being converted to a string.
    Returned Value
    Description
    QAVError.OK= 0
    The SDK was initialized successfully.
    AV_ERR_SDK_NOT_FULL_UPDATE=7015
    Checks whether the SDK file is complete. We recommend that you delete it and then import it again.
    The returned value AV_ERR_SDK_NOT_FULL_UPDATE is only a reminder but will not cause an initialization failure.
    If this error is reported during integration, check the integrity and version of the SDK file as prompted.
    If this error is returned after executable file export, ignore it and avoid displaying it on the UI.

    Sample code

    String sdkAppID = "14000*****";
    String openID = "100";
    int ret = ITMGContext.GetInstance(this).Init(sdkAppId, openId);
    if(ret != 0){
    Log.e(TAG,"SDK initialization failed");
    }

    Triggering event callback

    Event callbacks can be triggered by periodically calling the Poll API in update. The Poll API should be called periodically for GME to trigger event callbacks; otherwise, the entire SDK service will run exceptionally. You can refer to the EnginePollHelper.java file in the demo.
    Note:
    The Poll API must be called periodically and in the main thread to avoid abnormal API callbacks.

    Function prototype

    public abstract int Poll();

    Sample code

    private Handler mhandler = new Handler();
    private Runnable mRunnable = new Runnable() {
    @Override
    public void run() {
    if (s_pollEnabled) {
    if (ITMGContext.GetInstance(null) != null)
    ITMGContext.GetInstance(null).Poll();
    }
    mhandler.postDelayed(mRunnable, 33);
    }
    };

    Pausing the system

    When a Pause event occurs in the system, the engine should also be notified for pause. If you need to pause the audio when switching to the background, you can call the Pause API in the listening code used to switch to the background, and call the Resume API in the listening event used to resume the foreground.

    Function prototype

    public abstract int Pause();

    Resuming the system

    When a Resume event occurs in the system, the engine should also be notified for resumption. The Resume API only supports resuming voice chat.

    Function prototype

    public abstract int Resume();

    Uninitializing SDK

    This API is used to uninitialize the SDK to make it uninitialized. Switching accounts requires uninitialization.

    Function prototype

    public abstract int Uninit();

    Voice Messaging and Speech-to-Text

    Voice messaging refers to recording and sending a voice message. At the same time, the voice message can be converted to text and translated, as shown below:
    
    
    
    Note:
    We recommend that you use the streaming speech-to-text service.
    You do not need to enter a voice chat room when using the voice messaging service.

    Voice messaging and speech-to-text conversion flowchart

    
    
    

    Integrating Voice Messaging and Speech-to-Text Service

    Voice messaging and speech-to-text APIs

    API
    Description
    ApplyPTTAuthbuffer
    Initializes authentication.
    SetMaxMessageLength
    Specifies the maximum duration of a voice message.
    StartRecording
    Starts recording.
    StartRecordingWithStreamingRecognition
    Starts streaming recording.
    PauseRecording
    Pauses recording.
    ResumeRecording
    Resumes recording.
    StopRecording
    This API is used to stop audio recording.
    CancelRecording
    Cancels recording.
    GetMicLevel
    Gets the real-time mic volume level.
    SetMicVolume
    Sets the recording volume level.
    GetMicVolume
    Gets the recording volume level.
    GetSpeakerLevel
    Gets the real-time speaker volume level.
    SetSpeakerVolume
    Sets the playback volume level.
    GetSpeakerVolume
    Gets the playback volume level.
    UploadRecordedFile
    Uploads an audio file.
    DownloadRecordedFile
    Downloads an audio file.
    PlayRecordedFile
    Plays back an audio file.
    StopPlayFile
    Stops playing back an audio file.
    GetFileSize
    Gets the audio file size.
    GetVoiceFileDuration
    Gets the audio file duration.
    SpeechToText
    Converts speech to text.
    Maximum recording duration
    The maximum recording duration of a voice message is 58 seconds by default, and the minimum recording duration cannot be less than 1 second. If you want to customize the recording duration, for example, to modify the maximum recording duration to 10 seconds, please call the SetMaxMessageLength API to set it after initialization.

    Initializing the SDK

    Before the initialization, the SDK is in the uninitialized status, and you need to initialize it through the Init API before you can use the voice chat and voice message services.
    If you have any questions when using the service, see Speech-to-text Conversion.

    Authentication information

    Generate AuthBuffer for encryption and authentication of relevant features. For release in the production environment, use the backend deployment key as detailed in Authentication Key. To get the authentication key for voice messaging and speech-to-text services, the room ID parameter must be set to null.

    Function prototype

    AuthBuffer public native byte[] genAuthBuffer(int sdkAppId, String roomId, String openId, String key)
    Parameter
    Type
    Description
    appId
    int
    AppId from the Tencent Cloud console
    roomId
    string
    Room ID, which must be set to null.
    openId
    string
    User ID, which is the same as openId during initialization.
    key
    string
    Permission key from the Tencent Cloud console.

    Sample code

    import com.tencent.av.sig.AuthBuffer;// Header file
    byte[] authBuffer = AuthBuffer.getInstance().genAuthBuffer(Integer.parseInt(sdkAppId), "0",openId, key);

    Authentication initialization

    Call authentication initialization after initializing the SDK. For more information on how to get the authBuffer, see genAuthBuffer (the voice chat authentication information API).

    Function prototype

    public abstract int ApplyPTTAuthbuffer(byte[] authBuffer);
    Parameter
    Type
    Description
    authBuffer
    String
    Authentication

    Sample code

    byte[] authBuffer = AuthBuffer.getInstance().genAuthBuffer(Integer.parseInt(sdkAppId), "0", openId, key);
    ITMGContext.GetInstance(this).GetPTT().ApplyPTTAuthbuffer(authBuffer);

    Streaming Speech Recognition

    Starting streaming speech recognition

    This API is used to start streaming speech recognition. Text obtained from speech-to-text conversion will be returned in real time in its callback. It can specify a language for recognition or translate the information recognized in speech into a specified language and return the translation. To stop recording, call StopRecording. The callback will be returned after the recording is stopped.

    Function prototype

    public abstract int StartRecordingWithStreamingRecognition (String filePath);
    public abstract int StartRecordingWithStreamingRecognition (String filePath,String language,String translatelanguage);
    public abstract int StopRecording();
    Parameter
    Type
    Description
    filePath
    String
    Path of the stored audio file
    speechLanguage
    String
    The language in which the audio file is to be converted into text. For parameters, see Language Parameter Reference List.
    translateLanguage
    String
    The language into which the audio file is to be translated into text. For parameters, see Language Parameter Reference List. (This parameter is currently unavailable. Enter the same value as that of speechLanguage.)

    Sample code

    String temple = getActivity().getExternalFilesDir(null).getAbsolutePath() + "/test_"+(index++)+".ptt";
    ITMGContext.GetInstance(getActivity()).GetPTT().StartRecordingWithStreamingRecognition(temple,"cmn-Hans-CN","cmn-Hans-CN");

    Callback for streaming speech recognition

    After streaming speech recognition is started, you need to listen for callback messages in the callback function onEvent. Event messages are divided into:
    ITMG_MAIN_EVNET_TYPE_PTT_STREAMINGRECOGNITION_COMPLETE returns text after the recording is stopped and the recognition is completed, which is equivalent to returning the recognized text after a paragraph of speech.
    ITMG_MAIN_EVNET_TYPE_PTT_STREAMINGRECOGNITION_IS_RUNNING returns the recognized text in real time during the recording, which is equivalent to returning the recognized text while speaking.
    The event message will be identified in the OnEvent function based on the actual needs. The delivered event message contains the following four parameters.
    Parameter
    Description
    result
    Return code indicating whether streaming speech-to-text conversion is successful
    text
    Text converted from speech
    file_path
    Local path of the stored recording file
    file_id
    Backend URL address of the recording file, which will be retained for 90 days. This field is fixed at http://gme-v2-.
    Note:
    The file_id is empty when the 'ITMG_MAIN_EVNET_TYPE_PTT_STREAMINGRecognition_IS_RUNNING' message is listened.

    Error codes

    Error Code
    Description
    Solution
    32775
    Streaming speech-to-text conversion failed, but recording succeeded.
    Call the UploadRecordedFile API to upload the recording file and then call the SpeechToText API to perform speech-to-text conversion.
    32777
    Streaming speech-to-text conversion failed, but recording and upload succeeded.
    The message returned contains a backend URL after successful upload. Call the SpeechToText API to perform speech-to-text conversion.
    32786
    Streaming speech-to-text conversion failed.
    During streaming recording, wait for the execution result of the streaming recording API to return.

    Sample code

    public void OnEvent(ITMGContext.ITMG_MAIN_EVENT_TYPE type, Intent data) {
    if (ITMGContext.ITMG_MAIN_EVENT_TYPE.ITMG_MAIN_EVNET_TYPE_PTT_STREAMINGRECOGNITION_COMPLETE == type)
    {
    /Callback for streaming voice message and speech-to-text
    Handler mainHander = new Handler(Looper.getMainLooper());
    mainHander.post(new Runnable() {
    @Override
    public void run() {
    if (nErrCode ==0) {
    
    String textString = templeData.getStringExtra("text");
    EditText _editText = (EditText) root.findViewById(R.id.edit_audio_to_text);
    _editText.setText(textString);
    
    recordfilePath = templeData.getStringExtra("file_path");
    mEditTextfiletoupload.setText(recordfilePath);
    
    donwLoadUrlPath = templeData.getStringExtra("file_id");
    mEditTextDownloadurl.setText(donwLoadUrlPath);
    
    Log.e(TARGET, "STREAMINGRECOGNITION" + "nErrCode=" + nErrCode + ", content=" + textString+"recordfilePath"+recordfilePath+"donwLoadUrlPath"+donwLoadUrlPath);
    }
    else
    {
    
    Toast.makeText(getActivity(), String.format("Streaming speech-to-text conversion failed. Error code: %d",nErrCode), Toast.LENGTH_SHORT).show();
    Log.e(TARGET, "Streaming speech-to-text conversion failed. Error code"+nErrCode);
    }
    }
    });
    }
    }

    Voice Message Recording

    The recording process is as follows: start recording > stop recording > return recording callback > start the next recording.

    Specifying the maximum duration of voice message

    This API is used to specify the maximum duration of a voice message, which can be up to 58 seconds.

    Function prototype

    public abstract int SetMaxMessageLength(int msTime);
    Parameter
    Type
    Description
    msTime
    int
    Audio duration in ms. Value range: 1000 < msTime < 58000.

    Sample code

    ITMGContext.GetInstance(this).GetPTT().SetMaxMessageLength(msTime);

    Starting recording

    This API is used to start recording. The recording file must be uploaded first before you can perform operations such as speech-to-text conversion. To stop recording, call StopRecording.

    Function prototype

    public abstract int StartRecording(String filePath);
    Parameter
    Type
    Description
    filePath
    String
    Path of the stored audio file

    Sample code

    ITMGContext.GetInstance(this).GetPTT().StartRecording(filePath);

    Stopping recording

    This API is used to stop recording. It is async, and a callback for recording completion will be returned after recording stops. A recording file will be available only after recording succeeds.

    Function prototype

    public abstract int StopRecording();

    Sample code

    ITMGContext.GetInstance(this).GetPTT().StopRecording();

    Callback for recording start

    A callback will be executed through a delegate function to pass a message when recording is completed.
    To stop recording, call StopRecording. The callback for recording start will be returned after the recording is stopped.
    The callback function OnEvent will be called after recording is started. The event message ITMG_MAIN_EVNET_TYPE_PTT_RECORD_COMPLETE will be returned, which will be identified in the OnEvent function. The passed parameter includes result and file_path.

    Error codes

    Error Code
    Reasons
    Suggested Solution
    4097
    Empty parameters.
    Check whether the API parameters in the code are correct.
    4098
    An initialization error occurred.
    Check whether the device is being used, whether the permissions are normal, and whether the initialization is normal.
    4099
    Recording is in progress.
    Make sure that the SDK recording feature is used at the right time.
    4100
    No audio data is captured.
    Check whether the mic is working properly.
    4101
    An error occurred while accessing the file during recording.
    Ensure the existence of the file and the validity of the file path.
    4102
    The mic is not authorized.
    The mic permission is required for using the SDK. To add the permission, see the SDK project configuration document for the corresponding engine or platform.
    4103
    The recording duration is too short.
    The recording duration should be in ms and longer than 1,000 ms.
    4104
    No recording operation is started.
    Check whether the recording starting API has been called.

    Sample code

    public void OnEvent(ITMGContext.ITMG_MAIN_EVENT_TYPE type, Intent data) {
    if (ITMGContext.ITMG_MAIN_EVENT_TYPE.ITMG_MAIN_EVNET_TYPE_PTT_RECORD_COMPLETE == type)
    {
    // Callback for recording start
    if (nErrCode ==0)
    {
    recordfilePath = templeData.getStringExtra("file_path");
    mEditTextfiletoupload.setText(recordfilePath);
    }
    }
    }

    Pausing recording

    This API is used to pause recording. If you want to resume recording, call the ResumeRecording API.

    Function prototype

    public abstract int PauseRecording();

    Sample code

    ITMGContext.GetInstance(this).GetPTT().PauseRecording();

    Resuming recording

    This API is used to resume recording.

    Function prototype

    public abstract int ResumeRecording();

    Sample code

    ITMGContext.GetInstance(this).GetPTT().ResumeRecording();

    Canceling recording

    This API is used to cancel recording. There is no callback after cancellation.

    Function prototype

    public abstract int CancelRecording();

    Sample code

    ITMGContext.GetInstance(this).GetPTT().CancelRecording();

    Getting the real-time mic volume of voice message

    This API is used to get the real-time mic volume. An int-type value will be returned. Value range: 0-200.
    This API is different from the voice chat API and is in ITMGPTT.java.

    Function prototype

    public abstract int GetMicLevel();

    Sample code

    ITMGContext.GetInstance(this).GetPTT().GetMicLevel();

    Setting the recording volume of voice message

    This API is used to set the recording volume of voice message. Value range: 0-200.
    This API is different from the voice chat API and is in ITMGPTT.java.

    Function prototype

    public abstract int SetMicVolume(int volume);

    Sample code

    ITMGContext.GetInstance(this).GetPTT().SetMicVolume(100);

    Getting the recording volume of voice message

    This API is used to get the recording volume of voice message. An int-type value will be returned. Value range: 0-200.
    This API is different from the voice chat API and is in ITMGPTT.java.

    Function prototype

    public abstract int GetMicVolume();

    Sample code

    ITMGContext.GetInstance(this).GetPTT().GetMicVolume();

    Getting the real-time speaker volume of voice message

    This API is used to get the real-time speaker volume. An int-type value will be returned. Value range: 0-200.
    This API is different from the voice chat API and is in ITMGPTT.java.

    Function prototype

    public abstract int GetSpeakerLevel();

    Sample code

    ITMGContext.GetInstance(this).GetPTT().GetSpeakerLevel();

    Setting the playback volume of voice message

    This API is used to set the playback volume of voice message. Value range: 0-200.
    This API is different from the voice chat API and is in ITMGPTT.java.

    Function prototype

    public abstract int SetSpeakerVolume(int volume);

    Sample code

    ITMGContext.GetInstance(this).GetPTT().SetSpeakerVolume(100);

    Getting the playback volume of voice message

    This API is used to get the playback volume of voice message. An int-type value will be returned. Value range: 0-200.
    This API is different from the voice chat API and is in ITMGPTT.java.

    Function prototype

    public abstract int GetSpeakerVolume();

    Sample code

    ITMGContext.GetInstance(this).GetPTT().GetSpeakerVolume();

    Voice Message Playback

    Playing back audio

    This API is used to play back audio.

    Function prototype

    public abstract int PlayRecordedFile(String filePath);public abstract int PlayRecordedFile(String filePath,int voicetype);
    Parameter
    Type
    Description
    downloadFilePath
    String
    Local audio file path
    voicetype
    int
    Voice changing type. For more information, see Voice Changing.

    Error codes

    Error Code
    Reasons
    Suggested Solution
    20485
    Playback is not started.
    Ensure the existence of the file and the validity of the file path.

    Sample code

    ITMGContext.GetInstance(this).GetPTT().PlayRecordedFile(downloadFilePath);

    Callback for audio playback

    After the audio is played back, the event message ITMG_MAIN_EVNET_TYPE_PTT_PLAY_COMPLETE will be returned, which will be identified in the OnEvent function. The passed parameter includes result and file_path.

    Error codes

    Error Code
    Reasons
    Suggested Solution
    20481
    An initialization error occurred.
    Check whether the device is being used, whether the permissions are normal, and whether the initialization is normal.
    20482
    During playback, the client tried to interrupt and play back the next one but failed (which should succeed normally).
    Check whether the code logic is correct.
    20483
    Empty parameters.
    Check whether the API parameters in the code are correct.
    20484
    An internal error occurred.
    An error occurred while initializing the player. This error code is generally caused by failure in decoding, and the error should be located with the aid of logs.

    Sample code

    public void OnEvent(ITMGContext.ITMG_MAIN_EVENT_TYPE type, Intent data) {
    if(ITMGContext.ITMG_MAIN_EVNET_TYPE_PTT_PLAY_COMPLETE== type)
    {
    // Callback for audio playback
    }
    }

    Stopping audio playback

    This API is used to stop audio playback. There will be a callback for playback completion when the playback stops.

    Function prototype

    public abstract int StopPlayFile();

    Sample code

    ITMGContext.GetInstance(this).GetPTT().StopPlayFile();

    Getting audio file size

    This API is used to get the size of an audio file.

    Function prototype

    public abstract int GetFileSize(String filePath);
    Parameter
    Type
    Description
    filePath
    String
    Path of the audio file, which is a local path.

    Sample code

    ITMGContext.GetInstance(this).GetPTT().GetFileSize(path);

    Getting audio file duration

    This API is used to get the duration of an audio file in milliseconds.

    Function prototype

    public abstract int GetVoiceFileDuration(String filePath);
    Parameter
    Type
    Description
    filePath
    String
    Path of the audio file, which is a local path.

    Sample code

    ITMGContext.GetInstance(this).GetPTT().GetVoiceFileDuration(path);

    Voice Message Upload and Download

    Uploading an audio file

    This API is used to upload an audio file.

    Function prototype

    public abstract int UploadRecordedFile(String filePath);
    Parameter
    Type
    Description
    filePath
    String
    Path of the uploaded audio file, which is a local path.

    Sample code

    ITMGContext.GetInstance(this).GetPTT().UploadRecordedFile(filePath);

    Callback for audio file upload completion

    After the audio file is uploaded, the event message ITMG_MAIN_EVNET_TYPE_PTT_UPLOAD_COMPLETE will be returned, which will be identified in the OnEvent function. The passed parameters include result, file_path, and file_id.

    Error codes

    Error Code
    Reasons
    Suggested Solution
    8193
    An error occurred while accessing the file during upload.
    Ensure the existence of the file and the validity of the file path.
    8194
    Signature verification failed.
    Check whether the authentication key is correct and whether the voice messaging and speech-to-text feature is initialized.
    8195
    Network error
    Check whether the device can access the internet.
    8196
    The network failed while getting the upload parameters.
    Check whether the authentication is correct and whether the device network can normally access the internet.
    8197
    The packet returned during the process of getting the upload parameters is empty.
    Check whether the authentication is correct and whether the device network can normally access the internet.
    8198
    Failed to decode the packet returned during the process of getting the upload parameters.
    Check whether the authentication is correct and whether the device network can normally access the internet.
    8200
    appinfo is not set.
    Check whether the apply API is called or whether the input parameter is not specified or null.

    Sample code

    public void OnEvent(ITMGContext.ITMG_MAIN_EVENT_TYPE type, Intent data) {
    if(ITMGContext.ITMG_MAIN_EVENT_TYPE.ITMG_MAIN_EVNET_TYPE_PTT_UPLOAD_COMPLETE== type)
    {
    // Callback for audio file upload completion
    }
    }

    Downloading the audio file

    This API is used to download an audio file.

    Function prototype

    public abstract int DownloadRecordedFile(String fileID, String filePath);
    Parameter
    Type
    Description
    fileID
    String
    File URL
    downloadFilePath
    String
    Local path of the saved file

    Sample code

    ITMGContext.GetInstance(this).GetPTT().DownloadRecordedFile(url,path);

    Callback for audio file download completion

    After the audio file is downloaded, the event message ITMG_MAIN_EVNET_TYPE_PTT_DOWNLOAD_COMPLETE will be returned, which will be identified in the OnEvent function. The passed parameters include resultfile_path and file_id.

    Error codes

    Error Code
    Reasons
    Suggested Solution
    12289
    An error occurred while accessing the file during download.
    Check whether the file path is valid.
    12290
    Signature verification failed.
    Check whether the authentication key is correct and whether the voice messaging and speech-to-text feature is initialized.
    12291
    A network storage system exception occurred.
    The server failed to get the audio file. Check whether the API parameter fileid is correct, whether the network is normal, and whether the file exists in COS.
    12292
    A server file system error occurred.
    Check whether the device can access the internet and whether the file exists on the server.
    12293
    The HTTP network failed while getting the download parameters.
    Check whether the device can access the internet.
    12294
    The packet returned during the process of getting the download parameters is empty.
    Check whether the device can access the internet.
    12295
    Failed to decode the packet returned during the process of getting the download parameters.
    Check whether the device can access the internet.
    12297
    appinfo is not set.
    Check whether the authentication key is correct and whether the voice messaging and speech-to-text feature is initialized.

    Sample code

    public void OnEvent(ITMGContext.ITMG_MAIN_EVENT_TYPE type, Intent data) {
    if(ITMGContext.ITMG_MAIN_EVNET_TYPE_PTT_DOWNLOAD_COMPLETE== type)
    {
    //Download succeeded
    }
    }

    Speech-to-Text Service

    Converting audio file to text

    This API is used to convert a specified audio file to text.

    Function prototype

    public abstract int SpeechToText(String fileID);
    Parameter
    Type
    Description
    fileID
    String
    Audio file URL

    Sample code

    ITMGContext.GetInstance(this).GetPTT().SpeechToText(fileID);

    Translating audio file into text in specified language

    This API can specify a language for recognition or translate the information recognized in speech into a specified language and return the translation.

    Function prototype

    public abstract int SpeechToText(String fileID, String speechLanguage,String translatelanguage);
    Parameter
    Type
    Description
    fileID
    String
    URL of the audio file, which will be retained on the server for 90 days.
    speechLanguage
    String
    The language in which the audio file is to be converted into text. For parameters, see Language Parameter Reference List.
    translatelanguage
    String
    The language into which the audio file is to be translated into text. For parameters, see Language Parameter Reference List. (This parameter is currently unavailable. Enter the same value as that of speechLanguage.)

    Sample code

    ITMGContext.GetInstance(this).GetPTT().SpeechToText(fileID,"cmn-Hans-CN","cmn-Hans-CN");

    Callback for recognition

    After the specified audio file is converted to text, the event message ITMG_MAIN_EVNET_TYPE_PTT_SPEECH2TEXT_COMPLETE will be returned, which will be identified in the OnEvent function. The passed parameters include result, file_path and text (recognized text).

    Error codes

    Error Code
    Reasons
    Suggested Solution
    32769
    An internal error occurred.
    Analyze logs, get the actual error code returned from the backend to the client, and ask backend personnel for assistance.
    32770
    Network connection failed.
    Check whether the device can access the internet.
    32772
    Failed to decode the returned packet.
    Analyze logs, get the actual error code returned from the backend to the client, and ask backend personnel for assistance.
    32774
    appinfo is not set.
    Check whether the authentication key is correct and whether the voice messaging and speech-to-text feature is initialized.
    32776
    authbuffer check failed.
    Check whether authbuffer is correct.
    32784
    The speech-to-text conversion parameter is incorrect.
    Check whether the API parameter fileid in the code is empty.
    32785
    A speech-to-text translation error occurred.
    An error occurred in the voice messaging and speech-to-text feature on the backend. Analyze logs, get the actual error code returned from the backend to the client, and ask backend personnel for assistance.

    Sample code

    public void OnEvent(ITMGContext.ITMG_MAIN_EVENT_TYPE type, Intent data) {
    if(ITMGContext.ITMG_MAIN_EVNET_TYPE_PTT_SPEECH2TEXT_COMPLETE == type)
    {
    //Recognized audio file successfully
    }
    }

    Advanced APIs

    Getting version number

    This API is used to get the SDK version number for analysis.

    Function prototype

    public abstract String GetSDKVersion();

    Sample code

    ITMGContext.GetInstance(this).GetSDKVersion();

    Checking mic permission

    This API is used to return the mic permission status.

    Function prototype

    public abstract ITMG_RECORD_PERMISSION CheckMicPermission();

    Parameter description

    Parameter
    Value
    Description
    ITMG_PERMISSION_GRANTED
    0
    The mic permission is granted.
    ITMG_PERMISSION_Denied
    1
    Mic disabled.
    ITMG_PERMISSION_NotDetermined
    2
    No authorization box has been popped up to request the permission.
    ITMG_PERMISSION_ERROR
    3
    An error occurred while calling the API.

    Sample code

    ITMGContext.GetInstance(this).CheckMicPermission();

    Setting log printing level

    This API is used to set the level of logs to be printed, and needs to be called before the initialization. It is recommended to keep the default level.

    Function prototype

    public abstract int SetLogLevel(int levelWrite, int levelPrint);

    Parameter description

    Parameter
    Type
    Description
    levelWrite
    ITMG_LOG_LEVEL
    Sets the level of logs to be written. TMG_LOG_LEVEL_NONE indicates not to log. Default value: TMG_LOG_LEVEL_INFO.
    levelPrint
    ITMG_LOG_LEVEL
    Sets the level of logs to be printed. TMG_LOG_LEVEL_NONE indicates not to print. Default value: TMG_LOG_LEVEL_ERROR.

    ITMG_LOG_LEVEL

    ITMG_LOG_LEVEL
    Description
    TMG_LOG_LEVEL_NONE
    Does not print logs
    TMG_LOG_LEVEL_ERROR
    Prints error logs (default)
    TMG_LOG_LEVEL_INFO
    Prints info logs
    TMG_LOG_LEVEL_DEBUG
    Prints debug logs
    TMG_LOG_LEVEL_VERBOSE
    Prints verbose logs

    Sample code

    ITMGContext.GetInstance(this).SetLogLevel(TMG_LOG_LEVEL_INFO,TMG_LOG_LEVEL_INFO);

    Setting the log printing path

    This API is used to set the log printing path, which is /sdcard/Android/data/xxx.xxx.xxx/files by default.

    Function prototype

    public abstract int SetLogPath(String logDir);
    Parameter
    Type
    Description
    logDir
    String
    Path

    Sample code

    ITMGContext.GetInstance(this).SetLogPath(path);

    Callback Messages

    Message list

    Message
    Description
    ITMG_MAIN_EVNET_TYPE_PTT_RECORD_COMPLETE
    PTT recording is completed.
    ITMG_MAIN_EVNET_TYPE_PTT_UPLOAD_COMPLETE
    PTT upload is completed.
    ITMG_MAIN_EVNET_TYPE_PTT_DOWNLOAD_COMPLETE
    PTT download is completed.
    ITMG_MAIN_EVNET_TYPE_PTT_PLAY_COMPLETE
    PTT playback is completed.
    ITMG_MAIN_EVNET_TYPE_PTT_SPEECH2TEXT_COMPLETE
    Speech-to-text conversion is completed.

    Data list

    Message
    Data
    Example
    ITMG_MAIN_EVNET_TYPE_PTT_RECORD_COMPLETE
    result; file_path
    {"file_path":"","result":0}
    ITMG_MAIN_EVNET_TYPE_PTT_UPLOAD_COMPLETE
    result; file_path;file_id
    {"file_id":"","file_path":"","result":0}
    ITMG_MAIN_EVNET_TYPE_PTT_DOWNLOAD_COMPLETE
    result; file_path;file_id
    {"file_id":"","file_path":"","result":0}
    ITMG_MAIN_EVNET_TYPE_PTT_PLAY_COMPLETE
    result; file_path
    {"file_path":"","result":0}
    ITMG_MAIN_EVNET_TYPE_PTT_SPEECH2TEXT_COMPLETE
    result; text;file_id
    {"file_id":"","text":"","result":0}
    ITMG_MAIN_EVNET_TYPE_PTT_STREAMINGRECOGNITION_COMPLETE
    result; file_path; text;file_id
    {"file_id":"","file_path":","text":"","result":0}
    
    문의하기

    고객의 업무에 전용 서비스를 제공해드립니다.

    기술 지원

    더 많은 도움이 필요하시면, 티켓을 통해 연락 바랍니다. 티켓 서비스는 연중무휴 24시간 제공됩니다.

    연중무휴 24시간 전화 지원