tencent cloud

フィードバック

Speech-to-Text Service

最終更新日:2024-01-18 15:13:51
    This document describes how to integrating with and debug the GME APIs for macOS.
    Note:
    This document applies to GME SDK version 2.9.

    Key Considerations for Using GME

    GME provides two services: Voice chat service and voice messaging and speech-to-text service, both of which rely on key APIs such as Init and Poll.
    Note:
    There is a default call rate limit for speech-to-text APIs. For more information on how calls are billed within the limit, see Purchase Guide. If you want to increase the limit or learn more about how excessive calls are billed, submit a ticket.
    Non-streaming speech-to-text API SpeechToText(): There can be up to 10 concurrent requests per account.
    Streaming speech-to-text API StartRecordingWithStreamingRecognition(): There can be up to 50 concurrent requests per account.
    Real-time streaming speech-to-text API StartRealTimeASR(): There can be up to 50 concurrent requests per account.
    Note on Init API
    If you need to use voice chat and voice messaging services at the same time, you only need to call Init API once. The billing will not start after initialization. Receiving or sending a voice message in speech-to-text service is counted as a voice message DAU.
    
    image
    
    

    Directions

    Important notes

    Configure your project before using GME; otherwise, the SDK will not take effect.
    After a GME API is called successfully, QAVError.OK will be returned with the value being 0.
    GME APIs should be called in the same thread.
    The Poll API should be called periodically for GME to trigger event callbacks.
    For detailed error code, see Error Codes.

    Core APIs

    Before the initialization, the SDK is in the uninitialized status, and you need to initialize it through the Init API before you can use the voice chat and speech-to-text services.
    Call the Init API before calling any APIs of GME.
    If you have any questions when using the service, see General.
    API
    Description
    InitEngine
    Initializes GME
    Poll
    Triggers event callback
    Pause
    Pauses the system
    Resume
    Resumes the system
    Uninit
    Uninitializes GME
    SetDefaultAudienceAudioCategory
    Sets audio playback in background on device

    Imported header files

    #import "GMESDK/TMGEngine.h"
    #import "GMESDK/QAVAuthBuffer.h"

    Getting singleton

    To use the voice feature, get the ITMGContext object first.
    + (ITMGContext*) GetInstance;

    Sample code

    //TMGSampleViewController.m
    ITMGContext* _context = [ITMGContext GetInstance];

    Setting callbacks

    The API class uses the Delegate method to send callback notifications to the application. Register the callback function to the SDK for receiving callback messages.

    Sample code

    ITMGDelegate is used for declaration.
    @interface TMGDemoViewController ()<ITMGDelegate>{}
    ITMGDelegate < NSObject >
    
    //TMGSampleViewController.m
    ITMGContext* _context = [ITMGContext GetInstance];
    _context.TMGDelegate = [DispatchCenter getInstance];
    The API callback messages is processed in OnEvent. For the message type, see ITMG_MAIN_EVENT_TYPE. The message content is a dictionary for parsing the API callback contents.

    Function prototype

    - (void)OnEvent:(ITMG_MAIN_EVENT_TYPE)eventType data:(NSDictionary*)data;

    Sample code

    //TMGRealTimeViewController.m
    TMGRealTimeViewController ()< ITMGDelegate >
    
    
    - (void)OnEvent:(ITMG_MAIN_EVENT_TYPE)eventType data:(NSDictionary *)data {
    NSString *log = [NSString stringWithFormat:@"OnEvent:%d,data:%@", (int)eventType, data];
    [self showLog:log];
    NSLog(@"====%@====", log);
    switch (eventType) {
    // Step 6/11 : Perform the enter room event
    case ITMG_MAIN_EVENT_TYPE_ENTER_ROOM: {
    int result = ((NSNumber *)[data objectForKey:@"result"]).intValue;
    NSString *error_info = [data objectForKey:@"error_info"];
    
    [self showLog:[NSString stringWithFormat:@"OnEnterRoomComplete:%d msg:(%@)", result, error_info]];
    
    if (result == 0) {
    [self updateStatusEnterRoom:YES];
    }
    }
    break;
    }
    }
    
    // Refer to DispatchCenter.h and DispatchCenter.m

    Initializing SDK

    This API is used to initialize the GME service. It is recommended to call it when initializing the application. No fee is incurred for calling this API.
    For more information on how to get the sdkAppID parameter, see Activating Services.
    The openID uniquely identifies a user with the rules stipulated by the application developer and unique in the application (currently, only INT64 is supported).
    Note:
    The Init API must be called in the same thread with other APIs. It is recommended to call all APIs in the main thread.

    Function prototype

    -(int)InitEngine:(NSString*)sdkAppID openID:(NSString*)openID;
    Parameter
    Type
    Description
    sdkAppId
    String
    AppId provided by the GME service from the Tencent Cloud console
    OpenId
    String
    OpenId can only be in Int64 type, which is passed after being converted to a string.
    Returned Value
    Description
    QAV_OK= 0
    Initialized SDK successfully.
    QAV_ERR_SDK_NOT_FULL_UPDATE= 7015
    Checks whether the SDK file is complete. It is recommended to delete it and then import the SDK again.
    The returned value AV_ERR_SDK_NOT_FULL_UPDATE is only a reminder but will not cause an initialization failure.
    If this error is reported during integration, please check the integrity and version of the SDK file as prompted.
    If this error is returned after executable file export, please ignore it and try to avoid displaying it in the UI.

    Sample code

    _openId = _userIdText.text;
    _appId = _appIdText.text;
    [[ITMGContext GetInstance] InitEngine:SDKAPPID openID:_openId];

    Triggering event callback

    Event callbacks can be triggered by periodically calling the Poll API in update. The Poll API should be called periodically for GME to trigger event callbacks; otherwise, the entire SDK service will run exceptionally. For more information, see the EnginePollHelper.m file in Demo.
    Note:
    The Poll API must be called periodically and in the main thread to avoid abnormal API callbacks.

    Function prototype

    -(void)Poll;
    

    Sample code

    [[ITMGContext GetInstance] Poll];
    

    Pausing the system

    When a Pause event occurs in the system, the engine should also be notified for pause. If you need to pause the audio when switching to the background, you can call the Pause API in the listening code used to switch to the background, and call the Resume API in the listening event used to resume the foreground.

    Function prototype

    -(QAVResult)Pause;
    

    Resuming the system

    When a Resume event occurs in the system, the engine should also be notified for resumption. The Resume API only supports resuming voice chat.

    Function prototype

    -(QAVResult)Resume;
    

    Uninitializing SDK

    This API is used to uninitialize the SDK to make it uninitialized. Switching accounts requires uninitialization.

    Function prototype

    -(int)Uninit;
    

    Sample code

    [[ITMGContext GetInstance] Uninit];
    

    Voice Messaging and Speech-to-Text

    Voice messaging refers to recording and sending a voice message. At the same time, the voice message can be converted to text and translated, as shown below:
    
    
    
    Note:
    It is recommended to use the streaming speech-to-text service.
    You do not need to enter a voice chat room when using the voice message service.

    Voice messaging and speech-to-text conversion flowchart

    
    
    

    Integrating Voice Messaging and Speech-to-Text Service

    Voice messaging and speech-to-text APIs

    API
    Description
    ApplyPTTAuthbuffer
    Initializes authentication
    SetMaxMessageLength
    Specifies the maximum length of voice message
    StartRecording
    Starts recording
    StartRecordingWithStreamingRecognition
    Starts streaming recording
    PauseRecording
    Pauses recording
    ResumeRecording
    Resumes recording
    StopRecording
    Stops recording
    CancelRecording
    Cancels recording
    GetMicLevel
    Gets the real-time mic volume
    SetMicVolume
    Sets the recording volume
    GetMicVolume
    Gets the recording volume
    GetSpeakerLevel
    Gets the real-time speaker volume
    SetSpeakerVolume
    Sets the playback volume
    GetSpeakerVolume
    Gets the playback volume
    UploadRecordedFile
    Uploads the audio file
    DownloadRecordedFile
    Downloads the audio file
    PlayRecordedFile
    Plays back audio
    StopPlayFile
    Stops playing back audio
    GetFileSize
    Gets the audio file size
    GetVoiceFileDuration
    Gets the audio file duration
    SpeechToText
    Converts speech to text
    Maximum recording duration
    The maximum recording duration of a voice message is 58 seconds by default, and the minimum recording duration cannot be less than 1 second. If you want to customize the recording duration, for example, to modify the maximum recording duration to 10 seconds, please call the SetMaxMessageLength API to set it after initialization.

    Initializing the SDK

    Before the initialization, the SDK is in the uninitialized status, and you need to initialize it through the Init API before you can use the voice chat and voice message services.
    If you have any questions when using the service, see Speech-to-text Conversion.

    Authentication information

    Generate AuthBuffer for encryption and authentication of relevant features. For release in the production environment, please use the backend deployment key as detailed in Authentication Key.
    To get authentication for voice message and speech-to-text, the room ID parameter must be set to null.

    Function prototype

    @interface QAVAuthBuffer : NSObject
    + (NSData*) GenAuthBuffer:(unsigned int)appId roomId:(NSString*)roomId openID:(NSString*)openID key:(NSString*)key;
    + @end
    
    Parameter
    Type
    Description
    appId
    int
    AppId from the Tencent Cloud console.
    roomId
    NSString
    Enter null.
    openID
    NSString
    User ID, which is the same as openID during initialization.
    key
    NSString
    Permission key from the Tencent Cloud console.

    Sample code

    #import "GMESDK/QAVAuthBuffer.h"
    NSData* authBuffer = [QAVAuthBuffer GenAuthBuffer:SDKAPPID3RD.intValue roomId:_roomId openID:_openId key:AUTHKEY];
    

    Initializing authentication

    Call authentication initialization after initializing the SDK. For more information on how to get the authBuffer, see genAuthBuffer (the voice chat authentication information API).

    Function prototype

    public abstract int ApplyPTTAuthbuffer(byte[] authBuffer);
    
    Parameter
    Type
    Description
    authBuffer
    NSData*
    Authentication

    Sample code

    [[[ITMGContext GetInstance]GetPTT]ApplyPTTAuthbuffer:(NSData *)authBuffer];
    

    Streaming Speech Recognition

    Starting streaming speech recognition

    This API is used to start streaming speech recognition. Text obtained from speech-to-text conversion will be returned in real time in its callback. It can specify a language for recognition or translate the information recognized in speech into a specified language and return the translation. To stop recording, call StopRecording. The callback will be returned after the recording is stopped.

    Function prototype

    -(int)StartRecordingWithStreamingRecognition:(NSString *)filePath;
    -(int)StartRecordingWithStreamingRecognition:(NSString *)filePath language:(NSString*)speechLanguage translatelanguage:(NSString*)translateLanguage;
    
    Parameter
    Type
    Description
    filePath
    String
    Path of stored audio file
    speechLanguage
    String
    The language in which the audio file is to be converted to text. For parameters, see Language Parameter Reference List
    translateLanguage
    String
    The language into which the audio file will be translated. For parameters, see Language Parameter Reference List (This parameter is currently unavailable. Enter the same value as that of speechLanguage)

    Sample code

    recordfilePath = [docDir stringByAppendingFormat:@"/test_%d.ptt",index++];
    [[[ITMGContext GetInstance] GetPTT] StartRecordingWithStreamingRecognition:recordfilePath language:@"cmn-Hans-CN"];
    

    Callback for streaming speech recognition

    After streaming speech recognition is started, you need to listen for callback messages in the callback function onEvent. Event messages are divided into:
    ITMG_MAIN_EVNET_TYPE_PTT_STREAMINGRECOGNITION_COMPLETE returns text after the recording is stopped and the recognition is completed, which is equivalent to returning the recognized text after a paragraph of speech.
    ITMG_MAIN_EVNET_TYPE_PTT_STREAMINGRECOGNITION_IS_RUNNING returns the recognized text in real-time during the recording, which is equivalent to returning the recognized text while speaking.
    The event message will be identified in the OnEvent function based on the actual needs. The passed parameters include the following four messages.
    Message Name
    Description
    result
    A return code for judging whether the streaming speech recognition is successful.
    text
    Text converted from speech
    file_path
    Local path of stored recording file
    file_id
    Backend URL address of recording file, which will be retained for 90 days. fileid is fixed at http://gme-v2-
    Note:
    The file_id is empty when the 'ITMG_MAIN_EVNET_TYPE_PTT_STREAMINGRecognition_IS_RUNNING' message is listened.

    Error codes

    Error Code
    Description
    Suggested Solution
    32775
    Streaming speech-to-text conversion failed, but recording succeeded.
    Call the UploadRecordedFile API to upload the recording file and then call the SpeechToText API to perform speech-to-text conversion.
    32777
    Streaming speech-to-text conversion failed, but recording and upload succeeded.
    The message returned contains a backend URL after successful upload. Call the SpeechToText API to perform speech-to-text conversion.
    32786
    Streaming speech-to-text conversion failed.
    During streaming recording, wait for the execution result of the streaming recording API to return.

    Sample code

    - (void)OnEvent:(ITMG_MAIN_EVENT_TYPE)eventType data:(NSDictionary*)data
    {
    NSNumber *number = [data objectForKey:@"result"];
    switch (eventType)
    {
    case ITMG_MAIN_EVNET_TYPE_PTT_STREAMINGRECOGNITION_COMPLETE:
    {
    if (data != NULL &&[[data objectForKey:@"result"] intValue]== 0)
    {
    donwLoadUrlPath = data[@"file_id"];
    
    recordfilePath = [data objectForKey:@"file_path"];
    _localFileField.text = recordfilePath;
    
    _donwloadUrlField.text = [data objectForKey:@"file_id"] ;
    
    UITextField *_audiotoTextField =(UITextField*)objc_getAssociatedObject(self, [PTT_AUDIO_TO_TEXT UTF8String]);
    _audiotoTextField.text = [data objectForKey:@"text"] ;
    }
    
    }
    break;
    }
    }
    

    Voice Message Recording

    The recording process is as follows: start recording -> stop recording -> return recording callback -> start the next recording.

    Specifying the maximum duration of voice message

    This API is used to specify the maximum duration of a voice message, which can be up to 58 seconds.

    Function prototype

    -(QAVResult)SetMaxMessageLength:(int)msTime
    
    Parameter
    Type
    Description
    msTime
    int
    Audio duration in ms. Value range: 1000 < msTime <= 58000

    Sample code

    [[[ITMGContext GetInstance]GetPTT]SetMaxMessageLength:(int)msTime];
    

    Starting recording

    This API is used to start recording. The recording file must be uploaded first before you can perform operations such as speech-to-text conversion. To stop recording, call StopRecording.

    Function prototype

    -(int)StartRecording:(NSString*)filePath;
    
    Parameter
    Type
    Description
    filePath
    NSString
    Path of stored audio file

    Sample code

    recordfilePath =[docDir stringByAppendingFormat:@"/test_%d.ptt",index++];
    [[[ITMGContext GetInstance]GetPTT]StartRecording:recordfilePath];
    

    Stopping recording

    This API is used to stop recording. It is async, and a callback for recording completion will be returned after recording stops. A recording file will be available only after recording succeeds.

    Function prototype

    -(QAVResult)StopRecording;
    

    Sample code

    [[[ITMGContext GetInstance]GetPTT]StopRecording];
    

    Callback for recording start

    A callback will be executed through a delegate function to pass a message when recording is completed.
    To stop recording, call StopRecording. The callback for recording start will be returned after the recording is stopped.
    The callback function OnEvent will be called after recording is started. The event message ITMG_MAIN_EVNET_TYPE_PTT_RECORD_COMPLETE will be returned, which will be identified in the OnEvent function. The passed parameter includes result and file_path.

    Error codes

    Error Code Value
    Cause
    Suggested Solution
    4097
    Parameter is empty.
    Check whether the API parameters in the code are correct.
    4098
    Initialization error.
    Check whether the device is being used, whether the permissions are normal, and whether the initialization is normal.
    4099
    Recording is in progress.
    Ensure that the SDK recording feature is used at the right time.
    4100
    Audio data is not captured.
    Check whether the mic is working properly.
    4101
    An error occurred while accessing the file during recording.
    Ensure the existence of the file and the validity of the file path.
    4102
    The mic is not authorized.
    Mic permission is required for using the SDK. To add the permission, see the SDK project configuration document for the corresponding engine or platform.
    4103
    The recording duration is too short.
    The recording duration should be in ms and longer than 1,000 ms.
    4104
    No recording operation is started.
    Check whether the recording starting API has been called.

    Sample code

    -(void)OnEvent:(ITMG_MAIN_EVENT_TYPE)eventType data:(NSDictionary *)data{
    NSLog(@"OnEvent:%lu,data:%@",(unsigned long)eventType,data);
    switch (eventType) {
    case ITMG_MAIN_EVNET_TYPE_PTT_RECORD_COMPLETE:
    {
    //Recording callback
    }
    break;
    }
    }
    

    Pausing recording

    This API is used to pause recording. If you want to resume recording, please call the ResumeRecording API.

    Function prototype

    -(int)PauseRecording;
    

    Sample code

    [[[ITMGContext GetInstance]GetPTT]PauseRecording;
    

    Resuming recording

    This API is used to resume recording.

    Function prototype

    -(int)ResumeRecording;
    

    Sample code

    [[[ITMGContext GetInstance]GetPTT]ResumeRecording;
    

    Canceling recording

    This API is used to cancel recording. There is no callback after cancellation.

    Function prototype

    -(QAVResult)CancelRecording;
    

    Sample code

    [[[ITMGContext GetInstance]GetPTT]CancelRecording];
    

    Getting the real-time mic volume of voice message

    This API is used to get the real-time mic volume. An int-type value will be returned. Value range: 0-200.
    Note:
    This API is different from the voice chat API and is in ITMGPTT.

    Function prototype

    -(QAVResult)GetMicLevel;
    

    Sample code

    [[[ITMGContext GetInstance]GetPTT]GetMicLevel];
    

    Setting the recording volume of voice message

    This API is used to set the recording volume of voice message. Value range: 0-200.
    Note:
    This API is different from the voice chat API and is in ITMGPTT.

    Function prototype

    -(QAVResult)SetMicVolume:(int) volume;
    

    Sample code

    [[[ITMGContext GetInstance]GetPTT]SetMicVolume:100];
    

    Getting the recording volume of voice message

    This API is used to get the recording volume of voice message. An int-type value will be returned. Value range: 0-200.
    Note:
    This API is different from the voice chat API and is in ITMGPTT.

    Function prototype

    -(int)GetMicVolume;
    

    Sample code

    [[[ITMGContext GetInstance]GetPTT]GetMicVolume];
    

    Getting the real-time speaker volume of voice message

    This API is used to get the real-time speaker volume. An int-type value will be returned. Value range: 0-200.
    Note:
    This API is different from the voice chat API and is in ITMGPTT.

    Function prototype

    -(QAVResult)GetSpeakerLevel;
    

    Sample code

    [[[ITMGContext GetInstance]GetPTT]GetSpeakerLevel];
    

    Setting the playback volume of voice message

    This API is used to set the playback volume of voice messaging. Value range: 0-200.
    Note:
    This API is different from the voice chat API and is in ITMGPTT.

    Function prototype

    -(QAVResult)SetSpeakerVolume:(int)volume;
    

    Sample code

    [[[ITMGContext GetInstance]GetPTT]SetSpeakerVolume:100];
    

    Getting the playback volume of voice message

    This API is used to get the playback volume of voice messaging. An int-type value will be returned. Value range: 0-200.
    Note:
    This API is different from the voice chat API and is in ITMGPTT.

    Function prototype

    -(int)GetSpeakerVolume;
    

    Sample code

    [[[ITMGContext GetInstance]GetPTT]GetSpeakerVolume];
    

    Voice Message Playback

    Playing back audio

    This API is used to play back audio.

    Function prototype

    -(int)PlayRecordedFile:(NSString*)filePath;
    -(int)PlayRecordedFile:(NSString*)filePath VoiceType:(ITMG_VOICE_TYPE) type;
    
    Parameter
    Type
    Description
    downloadFilePath
    NSString
    Local audio file path
    type
    ITMG_VOICE_TYPE
    Voice changer type. For more information, see Voice Changing Effects.

    Error codes

    Error Code Value
    Cause
    Suggested Solution
    20485
    Playback is not started.
    Ensure the existence of the file and the validity of the file path.

    Sample code

    [[[ITMGContext GetInstance]GetPTT]PlayRecordedFile:path];
    

    Callback for audio playback

    After the audio is played back, the event message ITMG_MAIN_EVNET_TYPE_PTT_PLAY_COMPLETE will be returned, which will be identified in the OnEvent function. The passed parameter includes result and file_path.

    Error codes

    Error Code Value
    Cause
    Suggested Solution
    20481
    Initialization error.
    Check whether the device is being used, whether the permissions are normal, and whether the initialization is normal.
    20482
    During playback, the client tried to interrupt and play back the next one but failed (which should succeed normally).
    Check whether the code logic is correct.
    20483
    Parameter is empty.
    Check whether the API parameters in the code are correct.
    20484
    Internal error.
    An error occurred while initializing the player. This error code is generally caused by failure in decoding, and the error should be located with the aid of logs.

    Sample code

    -(void)OnEvent:(ITMG_MAIN_EVENT_TYPE)eventType data:(NSDictionary *)data{
    NSLog(@"OnEvent:%lu,data:%@",(unsigned long)eventType,data);
    switch (eventType) {
    case ITMG_MAIN_EVNET_TYPE_PTT_PLAY_COMPLETE:
    {
    // Callback for audio playback
    }
    break;
    }
    }
    

    Stopping audio playback

    This API is used to stop audio playback. There will be a callback for playback completion when the playback stops.

    Function prototype

    -(int)StopPlayFile;
    

    Sample code

    [[[ITMGContext GetInstance]GetPTT]StopPlayFile];
    

    Getting audio file size

    This API is used to get the size of an audio file.

    Function prototype

    -(int)GetFileSize:(NSString*)filePath;
    
    Parameter
    Type
    Description
    filePath
    NSString
    Path of audio file, which is a local path.

    Sample code

    [[[ITMGContext GetInstance]GetPTT]GetFileSize:path];
    

    Getting audio file duration

    This API is used to get the duration of an audio file in milliseconds.

    Function prototype

    -(int)GetVoiceFileDuration:(NSString*)filePath;
    
    Parameter
    Type
    Description
    filePath
    NSString
    Path of audio file, which is a local path.

    Sample code

    [[[ITMGContext GetInstance]GetPTT]GetVoiceFileDuration:path];
    

    Voice Message Upload and Download

    Uploading an audio file

    This API is used to upload an audio file.

    Function prototype

    -(void)UploadRecordedFile:(NSString*)filePath;
    
    Parameter
    Type
    Description
    filePath
    NSString
    Path of uploaded audio file, which is a local path.

    Sample code

    [[[ITMGContext GetInstance]GetPTT]UploadRecordedFile:path];
    

    Callback for audio file upload completion

    After the audio file is uploaded, the event message ITMG_MAIN_EVNET_TYPE_PTT_UPLOAD_COMPLETE will be returned, which will be identified in the OnEvent function. The passed parameters include result, file_path, and file_id.

    Error codes

    Error Code Value
    Cause
    Suggested Solution
    8193
    An error occurred while accessing the file during upload.
    Ensure the existence of the file and the validity of the file path.
    8194
    Signature verification failed.
    Check whether the authentication key is correct and whether the voice message and speech-to-text feature is initialized.
    8195
    A network error occurred.
    Check whether the device can access the internet.
    8196
    The network failed while getting the upload parameters.
    Check whether the authentication is correct and whether the device can access the internet.
    8197
    The packet returned during the process of getting the upload parameters is empty.
    Check whether the authentication is correct and whether the device network can normally access the internet.
    8198
    Failed to decode the packet returned during the process of getting the upload parameters.
    Check whether the authentication is correct and whether the device can access the internet.
    8200
    No appinfo is set.
    Check whether the apply API is called or whether the input parameters are empty.

    Sample code

    -(void)OnEvent:(ITMG_MAIN_EVENT_TYPE)eventType data:(NSDictionary *)data{
    NSLog(@"OnEvent:%lu,data:%@",(unsigned long)eventType,data);
    switch (eventType) {
    case ITMG_MAIN_EVNET_TYPE_PTT_UPLOAD_COMPLETE:
    {
    if (data != NULL &&[[data objectForKey:@"result"] intValue]== 0)
    {
    _donwloadUrlField.text = [data objectForKey:@"file_id"] ;
    donwLoadUrlPath = [data objectForKey:@"file_id"] ;
    }
    }
    break;
    }
    }
    

    Downloading the audio file

    This API is used to download an audio file.

    Function prototype

    -(void)DownloadRecordedFile:(NSString*)fileId downloadFilePath:(NSString*)downloadFilePath
    
    Parameter
    Type
    Description
    fileID
    NSString
    File URL path
    downloadFilePath
    NSString
    Local path of saved file

    Sample code

    [[[ITMGContext GetInstance]GetPTT]DownloadRecordedFile:fileIdpath downloadFilePath:path];
    

    Callback for audio file download completion

    After the audio file is downloaded, the event message ITMG_MAIN_EVNET_TYPE_PTT_DOWNLOAD_COMPLETE will be returned, which will be identified in the OnEvent function. The passed parameters include result, file_path, and file_id.

    Error codes

    Error Code Value
    Cause
    Suggested Solution
    12289
    An error occurred while accessing the file during download.
    Check whether the file path is valid.
    12290
    Signature verification failed.
    Check whether the authentication key is correct and whether the voice message and speech-to-text feature is initialized.
    12291
    Network storage system exception
    The server failed to get the audio file. Check whether the API parameter fileid is correct, whether the network is normal, and whether the file exists in COS.
    12292
    Server file system error.
    Check whether the device can access the internet and whether the file exists on the server.
    12293
    The HTTP network failed during the process of getting the download parameters.
    Check whether the device can access the internet.
    12294
    The packet returned during the process of getting the download parameters is empty.
    Check whether the device can access the internet.
    12295
    Failed to decode the packet returned during the process of getting the download parameters.
    Check whether the device can access the internet.
    12297
    No appinfo is set.
    Check whether the authentication key is correct and whether the voice message and speech-to-text feature is initialized.

    Sample code

    -(void)OnEvent:(ITMG_MAIN_EVENT_TYPE)eventType data:(NSDictionary *)data{
    NSLog(@"OnEvent:%lu,data:%@",(unsigned long)eventType,data);
    switch (eventType) {
    case ITMG_MAIN_EVNET_TYPE_PTT_DOWNLOAD_COMPLETE:
    {
    if (data != NULL &&[[data objectForKey:@"result"] intValue]== 0)
    {
    _audiofileToPlayField.text = [data objectForKey:@"file_path"] ;
    donwLoadLocalPath = [data objectForKey:@"file_path"];
    }
    else
    {
    donwLoadLocalPath = NULL;
    }
    }
    break;
    }
    }
    

    Speech-to-Text Service

    Converting audio file to text

    This API is used to convert a specified audio file to text.

    Function prototype

    -(void)SpeechToText:(NSString*)fileID;
    
    Parameter
    Type
    Description
    fileID
    NSString
    URL of audio file

    Sample code

    [[[ITMGContext GetInstance]GetPTT]SpeechToText:fileID];
    

    Translating audio file into text in specified language

    This API can specify a language for recognition or translate the information recognized in speech into a specified language and return the translation.

    Function prototype

    -(void)SpeechToText:(NSString*)fileID (NSString*)speechLanguage (NSString*)translateLanguage;
    
    Parameter
    Type
    Description
    fileID
    NSString*
    URL of audio file, which will be retained on the server for 90 days
    speechLanguage
    NSString*
    The language in which the audio file is to be converted to text. For parameters, see Language Parameter Reference List.
    translateLanguage
    NSString*
    The language into which the audio file will be translated. For parameters, see Language Parameter Reference List. This parameter is currently unavailable. Enter the same value as that of speechLanguage.

    Sample code

    [[[ITMGContext GetInstance]GetPTT]SpeechToText:fileID speechLanguage:"cmn-Hans-CN" translateLanguage:"cmn-Hans-CN"];
    

    Callback for recognition

    After the specified audio file is converted to text, the event message ITMG_MAIN_EVNET_TYPE_PTT_SPEECH2TEXT_COMPLETE will be returned, which will be identified in the OnEvent function. The passed parameters include result, file_path and text (recognized text).

    Error codes

    Error Code Value
    Cause
    Suggested Solution
    32769
    An internal error occurred.
    Analyze logs, get the actual error code returned from the backend to the client, and ask backend personnel for assistance.
    32770
    Network failed.
    Check whether the device can access the internet.
    32772
    Failed to decode the returned packet.
    Analyze logs, get the actual error code returned from the backend to the client, and ask backend personnel for assistance.
    32774
    No appinfo is set.
    Check whether the authentication key is correct and whether the voice message and speech-to-text feature is initialized.
    32776
    authbuffer check failed.
    Check whether authbuffer is correct.
    32784
    Incorrect speech-to-text conversion parameter.
    Check whether the API parameter fileid in the code is empty.
    32785
    Speech-to-text translation returned an error.
    Error with the backend of voice message and speech-to-text feature. Analyze logs, get the actual error code returned from the backend to the client, and ask backend personnel for assistance.

    Sample code

    -(void)OnEvent:(ITMG_MAIN_EVENT_TYPE)eventType data:(NSDictionary *)data{
    NSLog(@"OnEvent:%lu,data:%@",(unsigned long)eventType,data);
    switch (eventType) {
    case ITMG_MAIN_EVNET_TYPE_PTT_SPEECH2TEXT_COMPLETE:
    {
    if (data != NULL &&[[data objectForKey:@"result"] intValue]== 0)
    {
    UITextField *_audiotoTextField =(UITextField*)objc_getAssociatedObject(self, [PTT_AUDIO_TO_TEXT UTF8String]);
    _audiotoTextField.text = [data objectForKey:@"text"] ;
    }
    }
    break;
    }
    }
    

    Advanced APIs

    Getting version number

    This API is used to get the SDK version number for analysis.

    Function prototype

    -(NSString*)GetSDKVersion;
    

    Sample code

    [[ITMGContext GetInstance] GetSDKVersion];
    

    Checking mic permission

    This API is used to return the mic permission status.

    Function prototype

    -(ITMG_RECORD_PERMISSION)CheckMicPermission;
    

    Parameter description

    Parameter
    Value
    Description
    ITMG_PERMISSION_GRANTED
    0
    Mic permission is granted.
    ITMG_PERMISSION_Denied
    1
    Mic is disabled.
    ITMG_PERMISSION_NotDetermined
    2
    No authorization box has been popped up to request the permission.
    ITMG_PERMISSION_ERROR
    3
    An error occurred while calling the API.

    Sample code

    [[ITMGContext GetInstance] CheckMicPermission];
    

    Setting log printing level

    This API is used to set the level of logs to be printed, and needs to be called before the initialization. It is recommended to keep the default level.

    Function prototype

    -(void)SetLogLevel:(ITMG_LOG_LEVEL)levelWrite (ITMG_LOG_LEVEL)levelPrint;
    

    Parameter description

    Parameter
    Type
    Description
    levelWrite
    ITMG_LOG_LEVEL
    Sets the level of logs to be written. TMG_LOG_LEVEL_NONE indicates not to write. Default value: TMG_LOG_LEVEL_INFO
    levelPrint
    ITMG_LOG_LEVEL
    Sets the level of logs to be printed. TMG_LOG_LEVEL_NONE indicates not to print. Default value: TMG_LOG_LEVEL_ERROR

    ITMG_LOG_LEVEL

    ITMG_LOG_LEVEL
    Description
    TMG_LOG_LEVEL_NONE
    Does not print logs
    TMG_LOG_LEVEL_ERROR
    Prints error logs (default)
    TMG_LOG_LEVEL_INFO
    Prints info logs
    TMG_LOG_LEVEL_DEBUG
    Prints debug logs
    TMG_LOG_LEVEL_VERBOSE
    Prints verbose logs

    Sample code

    [[ITMGContext GetInstance] SetLogLevel:TMG_LOG_LEVEL_INFO TMG_LOG_LEVEL_INFO];
    

    Setting the log printing path

    . This API is used to set the log printing path, which is /Users/username/Library/Containers/xxx.xxx.xxx/Data/Documents by default.. Call before Init.

    Function prototype

    -(void)SetLogPath:(NSString*)logDir;
    
    Parameter
    Type
    Description
    logDir
    NSString
    Path

    Sample code

    [[ITMGContext GetInstance] SetLogPath:Path];
    

    Callback Messages

    Message list

    Message
    Description
    ITMG_MAIN_EVNET_TYPE_PTT_RECORD_COMPLETE
    Indicates that PTT recording is completed.
    ITMG_MAIN_EVNET_TYPE_PTT_UPLOAD_COMPLETE
    Indicates that PTT upload is completed.
    ITMG_MAIN_EVNET_TYPE_PTT_DOWNLOAD_COMPLETE
    Indicates that PTT download is completed.
    ITMG_MAIN_EVNET_TYPE_PTT_PLAY_COMPLETE
    Indicates that PTT playback is completed.
    ITMG_MAIN_EVNET_TYPE_PTT_SPEECH2TEXT_COMPLETE
    Indicates that speech-to-text conversion is completed.

    Data list

    Message
    Data
    Sample
    ITMG_MAIN_EVNET_TYPE_PTT_RECORD_COMPLETE
    result; file_path
    {"file_path":"","result":0}
    ITMG_MAIN_EVNET_TYPE_PTT_UPLOAD_COMPLETE
    result; file_path;file_id
    {"file_id":"","file_path":"","result":0}
    ITMG_MAIN_EVNET_TYPE_PTT_DOWNLOAD_COMPLETE
    result; file_path;file_id
    {"file_id":"","file_path":"","result":0}
    ITMG_MAIN_EVNET_TYPE_PTT_PLAY_COMPLETE
    result; file_path
    {"file_path":"","result":0}
    ITMG_MAIN_EVNET_TYPE_PTT_SPEECH2TEXT_COMPLETE
    result; text;file_id
    {"file_id":"","text":"","result":0}
    ITMG_MAIN_EVNET_TYPE_PTT_STREAMINGRECOGNITION_COMPLETE
    result; file_path; text;file_id
    {"file_id":"","file_path":","text":"","result":0}
    
    お問い合わせ

    カスタマーサービスをご提供できるため、ぜひお気軽にお問い合わせくださいませ。

    テクニカルサポート

    さらにサポートが必要な場合は、サポートチケットを送信して弊社サポートチームにお問い合わせください。24時間365日のサポートをご提供します。

    電話サポート(24 時間365日対応)