Access point information.
Used by actions: DescribeAccessPoints.
Name | Type | Description |
---|---|---|
AccessPointName | String | Access point name. |
AccessPointId | String | Unique access point ID. |
State | String | Access point status. Valid values: available, unavailable. |
Location | String | Access point location. |
LineOperator | Array of String | List of ISPs supported by access point. |
RegionId | String | ID of the region that manages the access point. |
AvailablePortType | Array of String | Available port type at the access point. Valid values: 1000BASE-T: gigabit electrical port; 1000BASE-LX: 10 km gigabit single-mode optical port; 1000BASE-ZX: 80 km gigabit single-mode optical port; 10GBASE-LR: 10 km 10-gigabit single-mode optical port; 10GBASE-ZR: 80 km 10-gigabit single-mode optical port; 10GBASE-LH: 40 km 10-gigabit single-mode optical port; 100GBASE-LR4: 10 km 100-gigabit single-mode optical portfiber optic port. Note: this field may return null , indicating that no valid value is obtained. |
Coordinate | Coordinate | Latitude and longitude of the access point Note: this field may return null , indicating that no valid values can be obtained. |
City | String | City where the access point is located Note: this field may return null , indicating that no valid values can be obtained. |
Area | String | Access point region Note: this field may return null , indicating that no valid values can be obtained. |
AccessPointType | String | Access point type. Valid values: VXLAN , QCPL , and QCAR .Note: this field may return null , indicating that no valid values can be obtained. |
BFD configuration information
Used by actions: CreateDirectConnectTunnel.
Name | Type | Required | Description |
---|---|---|---|
ProbeFailedTimes | Integer | No | Number of health checks |
Interval | Integer | No | Health check interval |
BGP parameter, including Asn and AuthKey.
Used by actions: CreateDirectConnectTunnel, DescribeDirectConnectTunnels, ModifyDirectConnectTunnelAttribute.
Name | Type | Required | Description |
---|---|---|---|
Asn | Integer | No | User-side BGP Asn. |
AuthKey | String | No | User-side BGP key. |
Coordinate describing the longitude and latitude.
Used by actions: DescribeAccessPoints.
Name | Type | Description |
---|---|---|
Lat | Float | Latitude |
Lng | Float | Longitude |
Connection information list.
Used by actions: DescribeDirectConnects.
Name | Type | Description |
---|---|---|
DirectConnectId | String | Connection ID. |
DirectConnectName | String | Connection name. |
AccessPointId | String | Access point ID of a connection. |
State | String | Connection status. PENDING: Applying. REJECTED: Application rejected. TOPAY: Payment pending. PAID: Paid. ALLOCATED: Constructing. AVAILABLE: Available. DELETING: Deleting. DELETED: Deleted. |
CreatedTime | Timestamp ISO8601 | Connection creation time. |
EnabledTime | Timestamp ISO8601 | Connection activation time. |
LineOperator | String | ISP that provides connections. Valid values: ChinaTelecom (China Telecom), ChinaMobile (China Mobile), ChinaUnicom (China Unicom), In-houseWiring (in-house wiring), ChinaOther (other Chinese ISPs), InternationalOperator (international ISPs). |
Location | String | Location of a local IDC. |
Bandwidth | Integer | Connection port bandwidth in Mbps. |
PortType | String | User-side port type of a connection. Valid values: 100Base-T (100-Megabit electrical Ethernet interface), 1000Base-T (1-Gigabit electrical Ethernet interface; it is the default value), 1000Base-LX (1-Gigabit single-mode optical Ethernet interface; 10 KM), 10GBase-T (10-Gigabit electrical Ethernet interface), 10GBase-LR (10-Gigabit single-mode optical Ethernet interface; 10 KM). |
CircuitCode | String | Circuit code of a connection, which is provided by the ISP or service provider. Note: this field may return null, indicating that no valid values can be obtained. |
RedundantDirectConnectId | String | ID of a redundant connection. |
Vlan | Integer | VLAN for connection debugging, which is enabled and automatically assigned by default. Note: this field may return null, indicating that no valid values can be obtained. |
TencentAddress | String | Tencent-side IP address for connection debugging. Note: this field may return null, indicating that no valid values can be obtained. |
CustomerAddress | String | User-side IP address for connection debugging. Note: this field may return null, indicating that no valid values can be obtained. |
CustomerName | String | Name of the connection applicant, which is obtained from the account system by default. Note: this field may return null, indicating that no valid values can be obtained. |
CustomerContactMail | String | Email address of the connection applicant, which is obtained from the account system by default. Note: this field may return null, indicating that no valid values can be obtained. |
CustomerContactNumber | String | Contact number of the connection applicant, which is obtained from the account system by default. Note: this field may return null, indicating that no valid values can be obtained. |
ExpiredTime | Timestamp ISO8601 | Connection expiration time. Note: this field may return null, indicating that no valid values can be obtained. |
ChargeType | String | Connection billing mode. NON_RECURRING_CHARGE: One-time charge for accessing service Note: this field may return null, indicating that no valid values can be obtained. |
FaultReportContactPerson | String | Fault reporting contact person. Note: this field may return null, indicating that no valid values can be obtained. |
FaultReportContactNumber | String | Fault reporting contact number. Note: this field may return null, indicating that no valid values can be obtained. |
TagSet | Array of Tag | Tag key-value pair Note: this field may return null, indicating that no valid values can be obtained. |
AccessPointType | String | Access point type of a connection. |
IdcCity | String | IDC city. Note: this field may return null, indicating that no valid values can be obtained. |
ChargeState | String | Billing status Note: this field may return null, indicating that no valid values can be obtained. |
StartTime | String | Connection activation time. Note: this field may return null, indicating that no valid values can be obtained. |
SignLaw | Boolean | Whether the connection has the service agreement signed. Note: this field may return null , indicating that no valid value is obtained. |
LocalZone | Boolean | Whether the connection is an edge zone. Note: this field may return null , indicating that no valid value is obtained. |
VlanZeroDirectConnectTunnelCount | Integer | Number of dedicated tunnels with disabled VLAN in the connection Note: this field may return null , indicating that no valid value can be found. |
OtherVlanDirectConnectTunnelCount | Integer | Number of dedicated tunnels with enabled VLAN in the connection Note: this field may return null , indicating that no valid values can be obtained. |
MinBandwidth | Integer | Minimum bandwidth of the connection Note: this field may return null , indicating that no valid values can be obtained. |
Dedicated tunnel information list.
Used by actions: DescribeDirectConnectTunnels.
Name | Type | Description |
---|---|---|
DirectConnectTunnelId | String | Dedicated tunnel ID. |
DirectConnectId | String | Connection ID. |
State | String | Dedicated tunnel status. AVAILABLE: Ready or connected. PENDING: Applying. ALLOCATING: Configuring. ALLOCATED: Configured. ALTERING: Modifying. DELETING: Deleting. DELETED: Deleted. COMFIRMING: To be accepted. REJECTED: Rejected. |
DirectConnectOwnerAccount | String | Connection owner, i.e., developer account ID. |
OwnerAccount | String | Dedicated tunnel owner, i.e., developer account ID. |
NetworkType | String | Network type. Valid values: VPC, BMVPC, CCN. VPC: Virtual Private Cloud; BMVPC: BM VPC; CCN: Cloud Connect Network. |
NetworkRegion | String | Network of the VPC region, such as ap-guangzhou . |
VpcId | String | Unified VPC ID or BMVPC ID. |
DirectConnectGatewayId | String | Direct connect gateway ID. |
RouteType | String | BGP: BGP routing; STATIC: Static routing. Default value: BGP routing. |
BgpPeer | BgpPeer | User-side BGP, including Asn and AuthKey. |
RouteFilterPrefixes | Array of RouteFilterPrefix | User-side IP range. |
Vlan | Integer | VLAN of a dedicated tunnel. |
TencentAddress | String | TencentAddress: Tencent-side IP address. |
CustomerAddress | String | CustomerAddress: User-side IP address. |
DirectConnectTunnelName | String | Dedicated tunnel name. |
CreatedTime | Timestamp ISO8601 | Creation time of a dedicated tunnel. |
Bandwidth | Integer | Bandwidth value of a dedicated tunnel. |
TagSet | Array of Tag | Tag value of a dedicated tunnel. |
NetDetectId | String | Associated custom network probe ID Note: this field may return null, indicating that no valid values can be obtained. |
EnableBGPCommunity | Boolean | BGP community switch Note: this field may return null, indicating that no valid values can be obtained. |
NatType | Integer | Whether it is a NAT tunnel Note: this field may return null, indicating that no valid values can be obtained. |
VpcRegion | String | VPC region abbreviation, such as gz , cd .Note: this field may return null, indicating that no valid values can be obtained. |
BfdEnable | Integer | Whether to enable BFD Note: this field may return null, indicating that no valid values can be obtained. |
AccessPointType | String | Access point type of a dedicated tunnel. Note: this field may return null, indicating that no valid values can be obtained. |
DirectConnectGatewayName | String | Direct connect gateway name. Note: this field may return null, indicating that no valid values can be obtained. |
VpcName | String | VPC name. Note: this field may return null, indicating that no valid values can be obtained. |
TencentBackupAddress | String | Backup IP address on the Tencent side. |
SignLaw | Boolean | Whether the connection associated with the dedicated tunnel has the service agreement signed. Note: this field may return null , indicating that no valid value is obtained. |
CloudAttachId | String | Cloud Attached Connection Service ID Note: this field may return null , indicating that no valid values can be obtained. |
Used for conditional filtering queries.
Used by actions: DescribeDirectConnectTunnels, DescribeDirectConnects, DescribeInternetAddress.
Name | Type | Required | Description |
---|---|---|---|
Name | String | Yes | Fields to be filtered. |
Values | Array of String | Yes | Filter values of the field. |
Internet tunnel’s IP address details
Used by actions: DescribeInternetAddress.
Name | Type | Description |
---|---|---|
InstanceId | String | Internet tunnel’s IP address ID Note: this field may return null , indicating that no valid values can be obtained. |
Subnet | String | Internet tunnel’s network address Note: this field may return null , indicating that no valid values can be obtained. |
MaskLen | Integer | Mask length of a network address Note: this field may return null , indicating that no valid values can be obtained. |
AddrType | Integer | Address type. Valid values: 0: BGP 1: China Telecom 2: China Mobile 3: China Unicom Note: this field may return null , indicating that no valid values can be obtained. |
Status | Integer | Address status. Valid values: 0: in use 1: disabled 2: returned |
ApplyTime | String | Applied at Note: this field may return null , indicating that no valid values can be obtained. |
StopTime | String | Disabled at Note: this field may return null , indicating that no valid values can be obtained. |
ReleaseTime | String | Returned at Note: this field may return null , indicating that no valid values can be obtained. |
Region | String | Region Note: this field may return null , indicating that no valid values can be obtained. |
AppId | Integer | User ID Note: this field may return null , indicating that no valid values can be obtained. |
AddrProto | Integer | Address protocol. Valid values: 0: IPv4; 1: IPv6 Note: this field may return null , indicating that no valid values can be obtained. |
ReserveTime | Integer | Retention period of a released IP address, in days Note: this field may return null , indicating that no valid values can be obtained. |
Public IP address statistics of internet tunnels
Used by actions: DescribeInternetAddressStatistics.
Name | Type | Description |
---|---|---|
Region | String | Region Note: this field may return null , indicating that no valid values can be obtained. |
SubnetNum | Integer | Number of public IP addresses for internet tunnels Note: this field may return null , indicating that no valid values can be obtained. |
NQA configuration information
Used by actions: CreateDirectConnectTunnel.
Name | Type | Required | Description |
---|---|---|---|
ProbeFailedTimes | Integer | No | Number of health checks |
Interval | Integer | No | Health check interval |
DestinationIp | String | No | IP address for the health check |
User-side IP range.
Used by actions: CreateDirectConnectTunnel, DescribeDirectConnectTunnels, ModifyDirectConnectTunnelAttribute.
Name | Type | Required | Description |
---|---|---|---|
Cidr | String | No | User-side IP range. |
Tag key-value pair
Used by actions: DescribeDirectConnectTunnels, DescribeDirectConnects.
Name | Type | Description |
---|---|---|
Key | String | Tag key Note: this field may return null, indicating that no valid values can be obtained. |
Value | String | Tag value Note: this field may return null, indicating that no valid values can be obtained. |
Was this page helpful?