tencent cloud

Cisco C Series Switches
Download PDF
Last updated: 2024-11-05 09:46:38
Cisco C Series Switches
Last updated: 2024-11-05 09:46:38
Download PDF
Direct Connect connects Tencent Cloud with the user IDC with a dedicated physical line. After configuring the Direct Connect gateway and dedicated tunnel on the Tencent Cloud side, users need to configure routes on the local IDC. Using the layer-3 sub-interfaces to connect to Tencent Cloud is recommended.
Note:
This document only introduces the local routing configurations associated with Tencent Cloud Direct Connect. For other information, please see the local router documentation or consult your router provider.

Routing Configuration

Note:
It's recommended that you use the default configurations of Keepalive and holdtime for the BGP connection between the two peers. The holdtime is three times the interval at which keepalive messages are sent. The recommended holdtime value is 180s.
# Configure ports
interfaces <interface_number>
description <interface_desc>
no shutdown
no switchport
speed <interface_speed>
duplex full
no negotiation auto
end

# Configure layer 3 sub-interfaces
interface  interface-number.subnumber
description <vlan_description>
encapsulation dot1q <vlanid>
ip address <subinterface_ipaddress> <subinterface_netmask>
end

# Configure IP SLA (NQA)
ip sla <operation-number>
icmp-echo x.x.x.x<nexthop_address> source-ip x.x.x.x <source_address>
frequency <value> //Set a detection frequency
timeout <value> //Set a timeout period
ip sla schedule <operation-number> life forever start-time now
end

# Configure Track-associated IP SLA
track <operation-number> ip sla <operation-number> reachability
end

# Configure static routes and associate track
ip route <ip_prefix> <netmask> <interface_number | vlan_id> <next_hop_ip> <name nexthop_name> <distance> <tag tag_value> track <operation-number>

Was this page helpful?
You can also Contact Sales or Submit a Ticket for help.
Yes
No

Feedback