Tencent Cloud

Recent Pages

Uploading Log via API

마지막 업데이트 시간:2024-01-20 17:14:28

Feature Description
This API is used to write a log to the specified log topic.
CLS provides the following two modes:
Load balancing mode
Hash routing mode
In this mode, logs will be automatically written to a target partition among all readable/writable partitions under the current log topic based on the load balancing principle. This mode is suitable for scenarios where the sequential consumption is not needed.
Sample
POST /structuredlog?topic_id=xxxxxxxx-xxxx-xxxx-xxxx HTTP/1.1
Host: <Region>.cls.tencentyun.com
Authorization: <AuthorizationString>
Content-Type: application/x-protobuf
﻿
<`LogGroupList` content packaged as a PB file>
Private and public domain names
CLS request domain names divide into private domain names and public domain names:
A private domain name is in the format of ${region}.cls.tencentyun.com, which is only valid for access requests from the same region, that is, CVM or Tencent Cloud services access the CLS service in the same region through the private domain name.
A public domain name is in the format of ${region}.cls.tencentcs.com. After the access source is connected to the internet, the public domain name of CLS can be accessed under normal circumstances.
The region field is the abbreviation of a CLS service region, such as ap-beijing for the Beijing region. For the complete region list, see Available Regions.
ap-beijing - Beijing
ap-shanghai - Shanghai
ap-guangzhou - Guangzhou
ap-chengdu - Chengdu
...
In this mode, data will be written to a target partition that meets the range requirements based on the hash value (x-cls-hashkey) carried by data. For example, a log source can be bound to a topic partition through hashkey, strictly guaranteeing the sequence of the data written to and consumed in this partition.
Sample
POST /structuredlog?topic_id=xxxxxxxx-xxxx-xxxx-xxxx HTTP/1.1
Host: <Region>.cls.tencentyun.com
Authorization: <AuthorizationString>
Content-Type: application/x-protobuf
x-cls-hashkey: xxxxxxxxxxxxxxxxxxxxxxxx
﻿
<`LogGroupList` content packaged as a PB file>
Note: 
For more information on the PB description file format and compilation steps, see PB Compilation Sample.
﻿
In addition, CLS allows you to upload logs in the following two modes:
Uploading compressed logs
Uploading original logs
In this mode, logs are compressed in LZ4 format for collection, and then uploaded for retention. This mode reduces the log upload traffic (write traffic) and saves costs.
Sample
POST /structuredlog?topic_id=xxxxxxxx-xxxx-xxxx-xxxx HTTP/1.1
Host: <Region>.cls.tencentyun.com
Authorization: <AuthorizationString>
Content-Type: application/x-protobuf
x-cls-compress-type:lz4
﻿
<`LogGroupList` content packaged as a PB file>
In this mode, logs are uploaded in their original size, which incurs higher log write traffic fees.
Sample
POST /structuredlog?topic_id=xxxxxxxx-xxxx-xxxx-xxxx HTTP/1.1
Host: <Region>.cls.tencentyun.com
Authorization: <AuthorizationString>
Content-Type: application/x-protobuf
﻿
<`LogGroupList` content packaged as a PB file>
Request
Request line
POST /structuredlog
Request headers
The x-cls-hashkey request header indicates that logs are written to the CLS topic partitions with a range corresponding to the hashkey route, strictly guaranteeing the write sequence of logs to each topic partition for sequential consumption.
Field Name
Type
Location
Required
Description
x-cls-hashkey
string
header
No
Specifies the topic partition to which the logs will be written based on hashkey
Request parameters
Field Name
Type
Location
Required
Description
topic_id
string
query
Yes
ID of the target log topic to which data will be uploaded, which can be viewed on the log topic page
logGroupList
message
pb
Yes
The logGroup list, which describes the encapsulated log groups. No more than five logGroup values are recommended.
LogGroup description:
Field Name
Required
Description
logs
Yes
Log array, which is a set consisting of multiple Log values. A Log indicates a log, and LogGroup can contain up to 10,000 Log values
contextFlow
No
UID used to maintain context, which does not take effect currently
filename
No
Log filename
source
No
Log source, which is generally the server IP
logTags
No
Tag list of the log
Log description:
Field Name
Required
Description
time
Yes
UNIX timestamp of log time in seconds or milliseconds (recommended)
contents
No
Log content in key-value format. A log can contain multiple key-value pairs.
Content description:
Field Name
Required
Description
key
Yes
Key of a field group in one log, which cannot start with _.
value
Yes
Value of a field group, which cannot exceed 1 MB in one log. The total value cannot exceed 5 MB in LogGroup.
LogTag description:
Field Name
Required
Description
key
Yes
Key of a custom tag
value
Yes
Value corresponding to the custom tag key
Response
Sample response
HTTP/1.1 200 OK
Content-Length: 0
Response headers
No special response headers. Only common headers are used.
Response parameters
N/A
Error Codes
For more information, see Error Codes.
PB Compilation Sample
This sample describes how to use the protoc compiler to compile the PB description file into a log upload API in C++.
Note: 
Currently, protoc supports compilation in multiple programming languages such as Java, C++, and Python. For more information, see protoc.
1. Install Protocol Buffer
Download Protocol Buffer, then decompress and install it. This document uses protobuf 2.6.1 running on CentOS 7.3 as an example.
Run the following command to decompress the protobuf-2.6.1.tar.gz package to /usr/local and access this directory:
[root@VM_0_8_centos]# tar -zxvf protobuf-2.6.1.tar.gz -C /usr/local/ && cd /usr/local/protobuf-2.6.1
Run the following commands to start compilation and installation and configure the environment variables:
[root@VM_0_8_centos protobuf-2.6.1]# ./configure 
[root@VM_0_8_centos protobuf-2.6.1]# make && make install
[root@VM_0_8_centos protobuf-2.6.1]# export PATH=$PATH:/usr/local/protobuf-2.6.1/bin
After the compilation succeeds, run the following command to view the version:
[root@VM_0_8_centos protobuf-2.6.1]# protoc --version
liprotoc 2.6.1
2. Create a PB description file
A PB description file is an agreed-on data exchange format for communication. To upload logs, compile the specified protocol format to an API in the target programming language and add the API to the project code. For more information, see protoc.
Create a PB message description file cls.proto based on the PB data format content specified by CLS.
Note: 
The PB description file content cannot be modified, and the filename must end with .proto.
The content of cls.proto (PB description file) is as follows:
package cls;
﻿
message Log
{
    message Content
    {
        required string key   = 1; // Key of each field group
        required string value = 2; // Value of each field group
    }
    required int64   time     = 1; // Unix timestamp
    repeated Content contents = 2; // Multiple `key-value` pairs in one log
}
﻿
message LogTag
{
    required string key       = 1;
    required string value     = 2;
}
﻿
message LogGroup
{
    repeated Log    logs        = 1; // Log array consisting of multiple logs
    optional string contextFlow = 2; // This parameter does not take effect currently
    optional string filename    = 3; // Log filename
    optional string source      = 4; // Log source, which is generally the server IP
    repeated LogTag logTags     = 5;
}
﻿
message LogGroupList
{
    repeated LogGroup logGroupList = 1; // Log group list
}
﻿
3. Compile and generate the API
This sample uses the proto compiler to generate a C++ file in the same directory as the cls.proto file. Run the following compilation commands:
protoc --cpp_out=./ ./cls.proto 
﻿
Note: 
--cpp_out=./  indicates that the file will be compiled in cpp format and output to the current directory. ./cls.proto indicates the cls.proto description file in the current directory.
After the compilation succeeds, the code file in the corresponding programming language will be generated. This sample generates the cls.pb.h header file and cls.pb.cc code implementation file.
[root@VM_0_8_centos protobuf-2.6.1]# protoc --cpp_out=./ ./cls.proto
[root@VM_0_8_centos protobuf-2.6.1]# ls
cls.pb.cc cls.pb.h cls.proto
4. Call
Import the generated cls.pb.h header file into the code and call the API for data format encapsulation.

문의하기

고객의 업무에 전용 서비스를 제공해드립니다.

기술 지원

더 많은 도움이 필요하시면, 티켓을 통해 연락 바랍니다. 티켓 서비스는 연중무휴 24시간 제공됩니다.

연중무휴 24시간 전화 지원

tencent cloud

Recent Pages

Uploading Log via API

Feature Description

Sample

Private and public domain names

Sample

Sample

Sample

Request

Request line

Request headers

Request parameters

Response

Sample response

Response headers

Response parameters

Error Codes

PB Compilation Sample

1. Install Protocol Buffer

2. Create a PB description file

3. Compile and generate the API

4. Call

문제 해결에 도움이 되었나요?

문제 해결에 도움이 되었나요?

Field Name	Type	Location	Required	Description
x-cls-hashkey	string	header	No	Specifies the topic partition to which the logs will be written based on `hashkey`

tencent cloud

가입하기

로그인

Recent Pages

Uploading Log via API

Feature Description

Sample

Private and public domain names

Sample

Sample

Sample

Request

Request line

Request headers

Request parameters

Response

Sample response

Response headers

Response parameters

Error Codes

PB Compilation Sample

1. Install Protocol Buffer

2. Create a PB description file

3. Compile and generate the API

4. Call

문제 해결에 도움이 되었나요?

문제 해결에 도움이 되었나요?