Tencent Cloud

Name	Type	Description
ZoneId	String	ID of the site.
DomainName	String	Accelerated domain name
DomainStatus	String	Status of the accelerated domain name. Values: `online`: Activated `process`: Being deployed `offline`: Disabled `forbidden`: Blocked `init`: Pending activation
OriginDetail	OriginDetail	Details of the origin. Note: This field may return null, indicating that no valid values can be obtained.
OriginProtocol	String	Origin-pull protocol configuration. Values: `FOLLOW`: Follow the protocol of origin `HTTP`: Send requests to the origin over HTTP `HTTPS`: Send requests to the origin over HTTPS Note: This field may return·null, indicating that no valid values can be obtained.
HttpOriginPort	Integer	The port used for HTTP origin-pull requests Note: This field may return·null, indicating that no valid values can be obtained.
HttpsOriginPort	Integer	The port used for HTTPS origin-pull requests Note: This field may return·null, indicating that no valid values can be obtained.
IPv6Status	String	IPv6 status. Values: `follow`: Follow the IPv6 configuration of the site `on`: Enable `off`: Disable Note: This field may return·null, indicating that no valid values can be obtained.
Cname	String	The CNAME address.
IdentificationStatus	String	Ownership verification status. Values: `pending`: Pending verification `finished`: Verified Note: This field may return null, indicating that no valid values can be obtained.
CreatedOn	Timestamp ISO8601	Creation time of the accelerated domain name.
ModifiedOn	Timestamp ISO8601	Modification time of the accelerated domain name.
OwnershipVerification	OwnershipVerification	Information required to verify the ownership of a domain name. Note: This field may return·null, indicating that no valid values can be obtained.
Certificate	AccelerationDomainCertificate	Domain name certificate information Note: This field may return·null, indicating that no valid values can be obtained.

AccelerationDomainCertificate

Information of the acceleration domain name certificate.

Used by actions: DescribeAccelerationDomains.

Name	Type	Required	Description
Mode	String	No	Certificate configuration mode. Values: `disable`: Do not configure the certificate; `eofreecert`: Use a free certificate provided by EdgeOne; `sslcert`: Configure an SSL certificate.
List	Array of CertificateInfo	No	List of certificates Note: This field may return·null, indicating that no valid values can be obtained.

AclCondition

The condition that makes up an access control rule

Used by actions: ModifySecurityPolicy.

Name	Type	Required	Description
MatchFrom	String	Yes	Filters: `host`: Request domain name; `sip`: Client IP; `ua`: User-Agent; `cookie`: Cookie; `cgi`: CGI script; `xff`: XFF header; `url`: Request URL; `accept`: Request content type; `method`: Request method<;/li> `header`: Request header; `app_proto`: Application layer protocol; `sip_proto`: Network layer protocol; `uabot`: UA rules (only available in custom bot rules); `idcid`: IDC rules (only available in custom bot rules); `sipbot`: Search engine rules (only available in custom bot rules); `portrait`: Client reputation (only available in custom bot rules); `header_seq`: Header sequence (only available in custom bot rules); `hdr`: Request body (only available in custom Web protection rules).
MatchParam	String	Yes	The parameter of the field. When `MatchFrom = header`, the key contained in the header can be passed.
Operator	String	Yes	The logical operator. Values: `equal`: Value equals `not_equal`: Value not equals `include`: String contains `not_include`: String not contains `match`: IP matches `not_match`: IP not matches `include_area`: Regions contain `is_empty`: Value left empty `not_exists`: Key fields not exist `regexp`: Regex matches `len_gt`: Value greater than `len_lt`: Value smaller than `len_eq`: Value equals `match_prefix`: Prefix matches `match_suffix`: Suffix matches `wildcard`: Wildcard
MatchContent	String	Yes	The content to match.

AclConfig

ACL configuration

Used by actions: ModifySecurityPolicy.

Name	Type	Required	Description
Switch	String	Yes	Switch. Values: `on`: Enable `off`: Disable
AclUserRules	Array of AclUserRule	Yes	The custom rule.
Customizes	Array of AclUserRule	No	Custom managed rules Note: This field may return `null`, indicating that no valid value can be obtained.

AclUserRule

The custom rule

Used by actions: ModifySecurityPolicy.

Name	Type	Required	Description
RuleName	String	Yes	The rule name.
Action	String	Yes	The action. Values: `trans`: Allow `drop`: Block the request `monitor`: Observe `ban`: Block the IP `redirect`: Redirect the request `page`: Return the specified page `alg`: JavaScript challenge
RuleStatus	String	Yes	The rule status. Values: `on`: Enabled `off`: Disabled
AclConditions	Array of AclCondition	Yes	The custom rule.
RulePriority	Integer	Yes	The rule priority. Value range: 0-100.
RuleID	Integer	No	Rule ID, which is only used as an output parameter.
UpdateTime	String	No	The update time, which is only used as an output parameter.
PunishTime	Integer	No	IP ban duration. Range: 0-2 days. It's required when `Action=ban`.
PunishTimeUnit	String	No	The unit of the IP ban duration. Values: `second`: Second `minutes`: Minute `hour`: Hour Default value: `second`.
Name	String	No	Name of the custom return page. It's required when `Action=page`.
PageId	Integer	No	(Disused) ID of the custom return page. The default value is 0, which means that the system default blocking page is used.
CustomResponseId	String	No	ID of custom response. The ID can be obtained via the `DescribeCustomErrorPages` API. It's required when `Action=page`.
ResponseCode	Integer	No	The response code to trigger the return page. It's required when `Action=page`. Value: 100-600. 3xx response codes are not supported. Default value: 567.
RedirectUrl	String	No	The redirection URL. It's required when `Action=redirect`.

Action

Rule engine action. Each feature supports only one of the following three action types. The RuleAction array can be of only one of the following types. For all details, see DescribeRulesSetting.

Used by actions: CreateRule, DescribeRules, ModifyRule.

Name	Type	Required	Description
NormalAction	NormalAction	No	Common feature operations. The options for this category include: Access URL overriding (AccessUrlRedirect); Origin URL overriding (UpstreamUrlRedirect); QUIC; WebSocket; Video dragging (VideoSeek); Token authentication (Authentication); Custom CacheKey (CacheKey); Node caching TTL (Cache); Browser caching TTL (MaxAge); Offline caching (OfflineCache); Smart routing (SmartRouting); Range-based origin pull (RangeOriginPull); HTTP/2 origin pull (UpstreamHttp2); Host header overriding (HostHeader); Forced HTTPS (ForceRedirect); HTTPS origin pull (OriginPullProtocol); Cache pre-refresh (CachePrefresh); Smart compression (Compression); Hsts; ClientIpHeader; SslTlsSecureConf; OcspStapling; HTTP/2 access (Http2); Redirection during origin pull (UpstreamFollowRedirect); Modifying origin server (Origin); Layer 7 origin pull timeout (HTTPUpstreamTimeout); HTTP response (HttpResponse). Note: This field may return null, indicating that no valid values can be obtained.
RewriteAction	RewriteAction	No	Feature operation with a request/response header. Features of this type include: `RequestHeader`: HTTP request header modification. `ResponseHeader`: HTTP response header modification. Note: This field may return null, indicating that no valid values can be obtained.
CodeAction	CodeAction	No	Feature operation with a status code. Features of this type include: `ErrorPage`: Custom error page. `StatusCodeCache`: Status code cache TTL. Note: This field may return null, indicating that no valid values can be obtained.

AdvancedFilter

Key-value pair filters for conditional filtering queries and fuzzy queries, such as filtering ID, name, and status.
If more than one filter exists, the logical relationship between these filters is AND.
If one filter has multiple values, the logical relationship between these values is OR.

Used by actions: DescribeAccelerationDomains, DescribeAliasDomains, DescribeConfigGroupVersions, DescribeCustomErrorPages, DescribeDeployHistory, DescribeOriginGroup, DescribePrefetchTasks, DescribePurgeTasks, DescribeRealtimeLogDeliveryTasks, DescribeZones.

Name	Type	Required	Description
Name	String	Yes	Field to be filtered.
Values	Array of String	Yes	Value of the filtered field.
Fuzzy	Boolean	No	Whether to enable fuzzy query.

AiRule

AI rule engine

Used by actions: ModifySecurityPolicy.

Name	Type	Required	Description
Mode	String	Yes	The status of the AI rule engine. Values: `smart_status_close`: Disabled `smart_status_open`: Block `smart_status_observe`: Observe

AlgDetectJS

Validate client behavior.

Used by actions: ModifySecurityPolicy.

Name	Type	Required	Description
Name	String	No	Method to validate client behavior.
WorkLevel	String	No	Proof-of-work strength. Values: `low` (default): Low `middle`: Medium `high`: High
ExecuteMode	Integer	No	Implement a delay before executing JS in milliseconds. Value range: 0-1000. Default value: 500.
InvalidStatTime	Integer	No	The period threshold for validating the result "Client JS disabled" in seconds. Value range: 5-3600. Default value: 10.
InvalidThreshold	Integer	No	The number of times for the result "Client JS disabled" occurred in the specified period. Value range: 1-100000000. Default value: 30.
AlgDetectResults	Array of AlgDetectResult	No	Client behavior validation results.

AlgDetectResult

Active bot detection results.

Used by actions: ModifySecurityPolicy.

Name	Type	Required	Description
Result	String	No	The validation result. Values: `invalid`: Invalid Cookie `cookie_empty`: No Cookie/Cookie expired `js_empty`: Client JS disabled `low`: Low-risk session `middle`: Medium-risk session `high`: High-risk session `timeout`: JS validation timed out `not_browser`: Invalid browser `is_bot`: Bot client
Action	String	No	The action. Values: `drop`: Block `monitor`: Observe `silence`: Drop w/o response `shortdelay`: Add short latency `longdelay`: Add long latency

AlgDetectRule

Active bot detection rule.

Used by actions: ModifySecurityPolicy.

Name	Type	Required	Description
RuleID	Integer	No	ID of the rule.
RuleName	String	No	Name of the rule.
Switch	String	No	Whether to enable the rule.
AlgConditions	Array of AclCondition	No	Condition specified for the rule.
AlgDetectSession	AlgDetectSession	No	Validate Cookie when the condition is satisfied. Note: This field may return `null`, indicating that no valid values can be obtained.
AlgDetectJS	Array of AlgDetectJS	No	Validate client behavior when the condition is satisfied.
UpdateTime	String	No	The update time, which is only used as an output parameter.

AlgDetectSession

Validate Cookie.

Used by actions: ModifySecurityPolicy.

Name	Type	Required	Description
Name	String	No	Method to validate Cookie.
DetectMode	String	No	The validation mode. Values: `detect`: Validate only `update_detect` (default): Update Cookie and validate
SessionAnalyzeSwitch	String	No	Whether to enable Cookie-based session check. The default value is `off`. Values: `off`: Disable `on`: Enable
InvalidStatTime	Integer	No	The period threshold for validating the result "No Cookie/Cookie expired" in seconds. Value range: 5-3600. Default value: 10.
InvalidThreshold	Integer	No	The number of times for the result "No Cookie/Cookie expired" occurred in the specified period. Value range: 1-100000000. Default value: 300.
AlgDetectResults	Array of AlgDetectResult	No	Cookie validation results.
SessionBehaviors	Array of AlgDetectResult	No	Cookie-based session check results.

AliasDomain

Information of the alias domain name

Used by actions: DescribeAliasDomains.

Name	Type	Description
AliasName	String	The alias domain name.
ZoneId	String	The site ID.
TargetName	String	The target domain name.
Status	String	Status of the alias domain name. Values: `active`: Activated `pending`: Deploying `conflict`: Reclaimed `stop`: Stopped
ForbidMode	Integer	The blocking mode. Values: `0`: Not blocked `11`: Blocked due to regulatory compliance `14`: Blocked due to ICP filing not obtained
CreatedOn	Timestamp ISO8601	Creation time of the alias domain name.
ModifiedOn	Timestamp ISO8601	Modification time of the alias domain name.

ApplicationProxy

Application proxy instance

Used by actions: DescribeApplicationProxies.

Name	Type	Description
ZoneId	String	The site ID.
ZoneName	String	The site name.
ProxyId	String	The proxy ID.
ProxyName	String	The domain name or subdomain name when `ProxyType=hostname`. The instance name when `ProxyType=instance`.
ProxyType	String	The proxy type. Values: `hostname`: The proxy is created by subdomain name. `instance`: The proxy is created by instance.
PlatType	String	The scheduling mode. Values: `ip`: Schedule via Anycast IP. `domain`: Schedule via CNAME.
Area	String	Acceleration region. Values: `mainland`: Chinese mainland. `overseas`: Global (outside the Chinese mainland); Default value: overseas.
SecurityType	Integer	Whether to enable security protection. Values: `0`: Disable security protection. `1`: Enable security protection.
AccelerateType	Integer	Whether to enable acceleration. Values: `0`: Disable acceleration. `1`: Enable acceleration.
SessionPersistTime	Integer	The session persistence duration.
Status	String	The rule status. Values: `online`: Enabled `offline`: Disabled `progress`: Deploying `stopping`: Disabling `fail`: Failed to deploy or disable
BanStatus	String	The blocking status of the proxy. Values: `banned`: Blocked `banning`: Blocking `recover`: Unblocked `recovering`: Unblocking
ScheduleValue	Array of String	Scheduling information.
HostId	String	When `ProxyType=hostname`: This field indicates the unique ID of the subdomain name.
Ipv6	Ipv6	The IPv6 access configuration.
UpdateTime	Timestamp ISO8601	The update time.
ApplicationProxyRules	Array of ApplicationProxyRule	List of rules.
AccelerateMainland	AccelerateMainland	Cross-MLC-border acceleration.

ApplicationProxyRule

Application proxy rule

Used by actions: CreateApplicationProxy, DescribeApplicationProxies.

Name	Type	Required	Description
Proto	String	Yes	Protocol. Valid values: TCP: TCP protocol; UDP: UDP protocol.
Port	Array of String	Yes	Port. Supported formats: A single port, such as 80. A port range, such as 81-82, indicating two ports 81 and 82. Note: Up to 20 ports can be input for each rule.
OriginType	String	Yes	Origin server type. Valid values: custom: manually added; loadbalancer: cloud load balancer; origins: origin server group.
OriginValue	Array of String	Yes	Origin server information. When OriginType is custom, it indicates one or more origin servers, such as `["8.8.8.8","9.9.9.9"]` or `OriginValue=["test.com"]`; When OriginType is loadbalancer, it indicates a cloud load balancer, such as ["lb-xdffsfasdfs"]; When OriginType is origins, it requires one and only one element, indicating the origin server group ID, such as ["origin-537f5b41-162a-11ed-abaa-525400c5da15"].
RuleId	String	No	Rule ID.
Status	String	No	Status. Valid values: online: enabled; offline: disabled; progress: deploying; stopping: disabling; fail: deployment or disabling failed.
ForwardClientIp	String	No	Passing the client IP address. Valid values: TOA: passing via TOA, available only when Proto = TCP; PPV1: passing via Proxy Protocol V1, available only when Proto = TCP; PPV2: passing via Proxy Protocol V2; OFF: no passing. Default value: OFF.
SessionPersist	Boolean	No	Whether to enable session persistence. Valid values: true: Enable; false: Disable. Default value: false.
SessionPersistTime	Integer	No	Duration for session persistence. The value takes effect only when SessionPersist is true. Note: This field may return null, which indicates a failure to obtain a valid value.
OriginPort	String	No	Origin server port. Supported formats: A single port, such as 80. A port range, such as 81-82, indicating two ports 81 and 82.
RuleTag	String	No	Rule tag. Note: This field may return null, which indicates a failure to obtain a valid value.

AscriptionInfo

The site ownership information

Used by actions: DescribeIdentifications, IdentifyZone.

Name	Type	Description
Subdomain	String
RecordType	String	The record type.
RecordValue	String	The record value.

BillingData

Billing data item

Used by actions: DescribeBillingData.

Name	Type	Description
Time	Timestamp ISO8601	Time.
Value	Integer	Value.

BillingDataFilter

Billing data filter criteria.

Used by actions: DescribeBillingData.

Name	Type	Required	Description
Type	String	Yes	Parameter name.
Value	String	Yes	Parameter value.

BindSharedCNAMEMap

Bindings between a shared CNAME and connected domain names

Used by actions: BindSharedCNAME.

Name	Type	Required	Description
SharedCNAME	String	Yes	The shared CNAME to be bound with or unbound from.
DomainNames	Array of String	Yes	Acceleration domains (up to 20).

BotConfig

Bot security configuration

Used by actions: ModifySecurityPolicy.

Name	Type	Required	Description
Switch	String	Yes	Whether to enable bot security. Values: `on`: Enable `off`: Disable
BotManagedRule	BotManagedRule	No	The settings of the bot managed rule. If it is null, the settings that were last configured will be used.
BotPortraitRule	BotPortraitRule	No	The settings of the client reputation rule. If it is null, the settings that were last configured will be used.
IntelligenceRule	IntelligenceRule	No	The bot intelligence settings. If it is null, the settings that were last configured will be used. Note: This field may return null, indicating that no valid values can be obtained.
BotUserRules	Array of BotUserRule	No	Settings of the custom bot rule. If it is null, the settings that were last configured will be used.
AlgDetectRule	Array of AlgDetectRule	No	Active bot detection rule.
Customizes	Array of BotUserRule	No	Settings of the bot managed rule. It is only used for output. Note: This field may return `null`, indicating that no valid values can be obtained.

BotExtendAction

Bot extended actions

Used by actions: ModifySecurityPolicy.

Name	Type	Required	Description
Action	String	Yes	Action. Valid values: `monitor`: Observe; `alg`: JavaScript challenge; `captcha`: Managed challenge; `random`: Actions are executed based on the percentage specified in `ExtendActions`; `silence`: Silence; `shortdelay`: Add short latency; `longdelay`: Add long latency.
Percent	Integer	No	The probability for triggering the action. Value range: 0-100. Note: This field may return `null`, indicating that no valid values can be obtained.

BotManagedRule

Bot managed rules. The rule IDs can be obtained from the output of DescribeBotManagedRules.

Used by actions: ModifySecurityPolicy.

Name	Type	Required	Description
Action	String	Yes	The rule action. Values: `drop`: Block `trans`: Allow `alg`: JavaScript challenge `monitor`: Observe
RuleID	Integer	No	The rule ID, which is only used as an output parameter.
TransManagedIds	Array of Integer	No	The ID of the rule that applies the "Allow" action. Note: This field may return null, indicating that no valid values can be obtained.
AlgManagedIds	Array of Integer	No	The ID of the rule that applies the "JavaScript challenge" action. Note: This field may return null, indicating that no valid values can be obtained.
CapManagedIds	Array of Integer	No	The ID of the rule that applies the "Managed challenge" action. Note: This field may return null, indicating that no valid values can be obtained.
MonManagedIds	Array of Integer	No	The ID of the rule that applies the "Observe" action. Note: This field may return null, indicating that no valid values can be obtained.
DropManagedIds	Array of Integer	No	The ID of the rule that applies the "Block" action. Note: This field may return null, indicating that no valid values can be obtained.

BotPortraitRule

Bot user portrait rules

Used by actions: ModifySecurityPolicy.

Name	Type	Required	Description
Switch	String	Yes	Switch. Values: `on`: Enable `off`: Disable
RuleID	Integer	No	The rule ID, which is only used as an output parameter.
AlgManagedIds	Array of Integer	No	The ID of the rule that applies the "JavaScript challenge" action. Note: This field may return null, indicating that no valid values can be obtained.
CapManagedIds	Array of Integer	No	The ID of the rule that applies the "Managed challenge" action. Note: This field may return null, indicating that no valid values can be obtained.
MonManagedIds	Array of Integer	No	The ID of the rule that applies the "Observe" action. Note: This field may return null, indicating that no valid values can be obtained.
DropManagedIds	Array of Integer	No	The ID of the rule that applies the "Block" action. Note: This field may return null, indicating that no valid values can be obtained.

BotUserRule

Custom bot rules

Used by actions: ModifySecurityPolicy.

Name	Type	Required	Description
RuleName	String	Yes
Action	String	Yes	The action. Values: `drop`: Block the request `monitor`: Observe `trans`: Allow `redirect`: Redirect the request `page`: Return the specified page `alg`: JavaScript challenge `captcha`: Managed challenge `random`: Handle the request randomly by the weight `silence`: Keep the connection but do not response to the client `shortdelay`: Add a short latency period `longdelay`: Add a long latency period
RuleStatus	String	Yes	The rule status. Values: `on`: Enabled `off`: Disabled Default value: `on`
AclConditions	Array of AclCondition	Yes	Details of the rule.
RulePriority	Integer	Yes	The rule weight. Value range: 0-100.
RuleID	Integer	No	Rule ID, which is only used as an output parameter.
ExtendActions	Array of BotExtendAction	No	[Currently unavailable] Specify the random action and percentage.
FreqFields	Array of String	No	The filter. Values: `sip`: Client IP This parameter is left empty by default.
UpdateTime	String	No	The update time, which is only used as an output parameter.
FreqScope	Array of String	No	Query scope. Values: `source_to_eo`: (Response) Traffic going from the origin to EdgeOne. `client_to_eo`: (Request) Traffic going from the client to EdgeOne. Default: `source_to_eo`.
Name	String	No	Name of the custom return page. It's required when `Action=page`.
CustomResponseId	String	No	ID of custom response. The ID can be obtained via the `DescribeCustomErrorPages` API. It's required when `Action=page`.
ResponseCode	Integer	No	The response code to trigger the return page. It's required when `Action=page`. Value: 100-600. 3xx response codes are not supported. Default value: 567.
RedirectUrl	String	No	The redirection URL. It's required when `Action=redirect`.

CC

CC configuration item.

Used by actions: DescribeHostsSetting.

Name	Type	Required	Description
Switch	String	Yes	WAF switch. Values: `on`: Enable `off`: Disable
PolicyId	Integer	No	ID of the policy

CLSTopic

The configuration information of real-time log delivery to Tencent Cloud CLS

Used by actions: CreateRealtimeLogDeliveryTask, DescribeRealtimeLogDeliveryTasks.

Name	Type	Required	Description
LogSetId	String	Yes	The ID of the Tencent Cloud CLS log set.
TopicId	String	Yes	The ID of the Tencent Cloud CLS log topic.
LogSetRegion	String	Yes	The region of the Tencent Cloud CLS log set.

Cache

Cache time settings

Used by actions: DescribeHostsSetting, ModifyZoneSetting.

Name	Type	Required	Description
Switch	String	Yes	Whether to enable cache configuration. Values: `on`: Enable `off`: Disable
CacheTime	Integer	No	Cache expiration time setting. Unit: second. The maximum value is 365 days. Note: This field may return null, indicating that no valid values can be obtained.

CacheConfig

Cache rule configuration.

Used by actions: DescribeHostsSetting, DescribeZoneSetting, ModifyZoneSetting.

Name	Type	Required	Description
Cache	Cache	No	Cache configuration Note: This field may return null, indicating that no valid values can be obtained.
NoCache	NoCache	No	No-cache configuration Note: This field may return null, indicating that no valid values can be obtained.
FollowOrigin	FollowOrigin	No	Follows the origin server configuration Note: This field may return null, indicating that no valid values can be obtained.

CacheKey

The cache key configuration.

Used by actions: DescribeHostsSetting, DescribeZoneSetting, ModifyZoneSetting.

Name	Type	Required	Description
FullUrlCache	String	No	Whether to enable full-path cache. Values: `on`: Enable full-path cache (i.e., disable Ignore Query String). `off`: Disable full-path cache (i.e., enable Ignore Query String). Note: This field may return null, indicating that no valid values can be obtained.
IgnoreCase	String	No	Whether to ignore case in the cache key. Values: `on`: Ignore `off`: Not ignore Note: This field may return null, indicating that no valid values can be obtained.
QueryString	QueryString	No	Request parameter contained in `CacheKey`. Note: This field may return `null`, indicating that no valid values can be obtained.

CachePrefresh

Cache prefresh

Used by actions: DescribeZoneSetting, ModifyZoneSetting.

Name	Type	Required	Description
Switch	String	Yes	Whether to enable cache prefresh. Values: `on`: Enable `off`: Disable
Percent	Integer	No	The cache prefresh percentage. Values: 1-99 Note: This field may return null, indicating that no valid values can be obtained.

CacheTag

The information attached when the node cache purge type is set to purge_cache_tag.

Used by actions: CreatePurgeTask.

Name	Type	Required	Description
Domains	Array of String	Yes	List of domain names to purge cache for.

CertificateInfo

HTTPS server certificate configuration

Used by actions: DescribeAccelerationDomains, ModifyHostsCertificate.

Name	Type	Required	Description
CertId	String	Yes	Certificate ID, which originates from the SSL side. You can check the CertId from the SSL Certificate List.
Alias	String	No	Alias of the certificate.
Type	String	No	Type of the certificate. Values: `default`: Default certificate `upload`: Specified certificate `managed`: Tencent Cloud-managed certificate
ExpireTime	Timestamp ISO8601	No	The certificate expiration time.
DeployTime	Timestamp ISO8601	No	Time when the certificate is deployed.
SignAlgo	String	No	Signature algorithm.
Status	String	No	Status of the certificate. Values: u200c `deployed`: The deployment has completed u200c `processing`: Deployment in progress u200c `applying`: Application in progress u200c `failed`: Application rejected `issued`: Binding failed.

CheckRegionHealthStatus

Health status of origin servers in each health check region.

Used by actions: DescribeOriginGroupHealthStatus.

Name	Type	Description
Region	String	Health check region, which is a two-letter code according to ISO-3166-1.
Healthy	String	Health status of origin servers in a single health check region. Valid values: Healthy: healthy. Unhealthy: unhealthy. Undetected: no data detected. Note: If all origin servers in a single health check region are healthy, the status is healthy; otherwise, it is unhealthy.
OriginHealthStatus	Array of OriginHealthStatus	Origin server health status.

ClientIpCountry

Location information of the client IP carried in origin-pull. It is formatted as a two-letter ISO-3166-1 country/region code.

Used by actions: DescribeHostsSetting, DescribeZoneSetting, ModifyZoneSetting.

Name	Type	Required	Description
Switch	String	Yes	Whether to enable configuration. Values: `on`: Enable `off`: Disable
HeaderName	String	No	Name of the request header that contains the client IP region. It is valid when `Switch=on`. The default value `EO-Client-IPCountry` is used when it is not specified.

ClientIpHeader

The client IP header configuration

Used by actions: DescribeZoneSetting, ModifyZoneSetting.

Name	Type	Required	Description
Switch	String	Yes	Whether to enable the configuration. Values: `on`: Enable `off`: Disable
HeaderName	String	No	Name of the request header containing the client IP address for origin-pull. When Switch is on, this parameter is required. X-Forwarded-For is not allowed for this parameter. Note: This field may return null, which indicates a failure to obtain a valid value.

CnameStatus

CNAME status

Used by actions: CheckCnameStatus.

Name	Type	Description
RecordName	String	The domain name.
Cname	String	The CNAME address. Note: This field may return null, indicating that no valid values can be obtained.
Status	String	The CNAME status. Values: `active`: Activated `moved`: Not activated Note: This field may return null, indicating that no valid values can be obtained.

CodeAction

Rule engine action with a status code

Used by actions: CreateRule, DescribeRules, ModifyRule.

Name	Type	Required	Description
Action	String	Yes	Feature name. For details, see DescribeRulesSetting API
Parameters	Array of RuleCodeActionParams	Yes	Operation parameter.

Compression

Smart compression configuration.

Used by actions: DescribeHostsSetting, DescribeZoneSetting, ModifyZoneSetting.

Name	Type	Required	Description
Switch	String	Yes	Whether to enable smart compression. Values: `on`: Enable `off`: Disable
Algorithms	Array of String	No	Compression algorithm. Values: `brotli`: Brotli algorithm `gzip`: Gzip algorithm Note: This field may return null, indicating that no valid values can be obtained.

ConfigGroupVersionInfo

Version information about the configuration group.

Used by actions: DeployConfigGroupVersion, DescribeConfigGroupVersionDetail, DescribeConfigGroupVersions, DescribeDeployHistory, DescribeEnvironments.

Name	Type	Required	Description
VersionId	String	Yes	Version ID.
VersionNumber	String	No	Version No.
GroupId	String	No	Configuraration group ID.
GroupType	String	No	Configuration group type. Valid values: l7_acceleration: L7 acceleration configuration group. edge_functions: Edge function configuration group.
Description	String	No	Version description.
Status	String	No	Version status. Valid values: creating: Being created. inactive: Not effective. active: Effective.
CreateTime	Timestamp ISO8601	No	Version creation time. The time format follows the ISO 8601 standard and is represented in Coordinated Universal Time (UTC).

CustomEndpoint

The configuration information of real-time log delivery to a custom HTTP(S) interface

Used by actions: CreateRealtimeLogDeliveryTask, DescribeRealtimeLogDeliveryTasks, ModifyRealtimeLogDeliveryTask.

Name	Type	Required	Description
Url	String	Yes	Address of the custom HTTP API for real-time log shipping. Currently, only HTTP and HTTPS protocols are supported.
AccessId	String	No	Custom SecretId used for generating an encrypted signature. This parameter is required if the origin server needs authentication.
AccessKey	String	No	Custom SecretKey used for generating an encrypted signature. This parameter is required if the origin server needs authentication.
CompressType	String	No	Type of data compression. Valid values: gzip: gzip compression. If this parameter is not input, compression is disabled.
Protocol	String	No	Type of the application layer protocol used in POST requests for log shipping. Valid values: http: HTTP protocol; https: HTTPS protocol. If this parameter is not input, the protocol type is parsed from the URL field.
Headers	Array of Header	No	Custom request header carried in log shipping. For a header carried by default in EdgeOne log pushing, such as Content-Type, the header value you input will overwrite the default value. The header value references a single variable ${batchSize} to obtain the number of log entries included in each POST request.

CustomErrorPage

Custom error code page structure.

Used by actions: DescribeCustomErrorPages.

Name	Type	Description
PageId	String	Custom error page ID.
ZoneId	String	Zone ID.
Name	String	Custom error page name.
ContentType	String	Custom error page type.
Description	String	Custom error page description.
Content	String	Custom error page content.
References	Array of ErrorPageReference	Custom error page reference.

CustomField

The custom log field in a real-time log delivery task.

Used by actions: CreateRealtimeLogDeliveryTask, DescribeRealtimeLogDeliveryTasks, ModifyRealtimeLogDeliveryTask.

Name	Type	Required	Description
Name	String	Yes	Type of the custom log filed, which indicates extracting data from a specified position in HTTP requests and responses. Valid values: ReqHeader: Extract the value of a specified field from an HTTP request header; RspHeader: Extract the value of a specified field from an HTTP response header; Cookie: Extract the value of a specified field from a cookie; ReqBody: Extract specified content from an HTTP request body using a Google RE2 regular expression. Note: This field may return null, which indicates a failure to obtain a valid value.
Value	String	Yes	Enter the definition of the field value based on the field type (Name). This parameter is case-sensitive. When the field type is ReqHeader, RspHeader, or Cookie, enter the name of the parameter for which you need to extract the value, such as Accept-Language. You can enter 1-100 characters. The name should start with a letter, contain letters, digits, and hyphens (-) in the middle, and end with a letter or digit. When the field type is ReqBody, enter the Google RE2 regular expression. The maximum length of the regular expression is 4 KB. Note: This field may return null, which indicates a failure to obtain a valid value.
Enabled	Boolean	No	Indicates whether to deliver this field. If not filled in, this field will not be delivered. Note: This field may return null, indicating that no valid values can be obtained.

CustomizedHeader

Custom header that can be configured for HTTP/HTTPS health check policies under a LoadBalancer.

Used by actions: CreateLoadBalancer, ModifyLoadBalancer.

Name	Type	Required	Description
Key	String	Yes	Custom header key. Note: This field may return null, which indicates a failure to obtain a valid value.
Value	String	Yes	Custom header value. Note: This field may return null, which indicates a failure to obtain a valid value.

DDoS

DDoS mitigation configuration

Used by actions: DescribeHostsSetting.

Name	Type	Required	Description
Switch	String	Yes	Switch. Values: `on`: Enable `off`: Disable

DDoSAttackEvent

Information of the DDoS attacker

Used by actions: DescribeDDoSAttackEvent.

Name	Type	Description
EventId	String	The event ID.
AttackType	String	The attack type.
AttackStatus	Integer	The attack status.
AttackMaxBandWidth	Integer	The maximum attack bandwidth.
AttackPacketMaxRate	Integer	The peak attack packet rate.
AttackStartTime	Integer	The attack start time recorded in seconds.
AttackEndTime	Integer	The attack end time recorded in seconds.
PolicyId	Integer	The DDoS policy ID. Note: This field may return `null`, indicating that no valid value was found.
ZoneId	String	The site ID. Note: This field may return `null`, indicating that no valid value was found.
Area	String	Geolocation scope. Values: `overseas`: Regions outside the Chinese mainland `mainland`: Chinese mainland Note: This field may return `null`, indicating that no valid value was found.
DDoSBlockData	Array of DDoSBlockData	The blocking time of a DDoS attack. Note: This field may return `null`, indicating that no valid value was found.

DDoSBlockData

DDoS blocking details

Used by actions: DescribeDDoSAttackEvent.

Name	Type	Description
StartTime	Integer	The start time recorded in UNIX timestamp.
EndTime	Integer	The end time recorded in UNIX timestamp. `0` indicates the blocking is ongoing.
BlockArea	String	The regions blocked.

DDosProtectionConfig

Exclusive DDoS protection specifications configuration applicable to Layer 4 proxy or web site service.

Used by actions: CreateL4Proxy, DescribeL4Proxy.

Name	Type	Required	Description
LevelMainland	String	No	Dedicated anti-DDoS specifications in the Chinese mainland. For details, refer to Dedicated Anti-DDoS Related Fees. PLATFORM: uses the default protection. Dedicated anti-DDoS is not enabled; BASE30_MAX300: uses dedicated anti-DDoS, which provides 30 Gbps guaranteed protection bandwidth and up to 300 Gbps elastic protection bandwidth; BASE60_MAX600: uses dedicated anti-DDoS, which provides 60 Gbps guaranteed protection bandwidth and up to 600 Gbps elastic protection bandwidth. If this field is not specified, the default value 'PLATFORM' will be used.
MaxBandwidthMainland	Integer	No	Configuration of elastic protection bandwidth for exclusive DDoS protection in the Chinese mainland.Valid only when exclusive DDoS protection in the Chinese mainland is enabled (refer to the LevelMainland parameter configuration), and the value has the following limitations: When exclusive DDoS protection is enabled in the Chinese mainland and the 30 Gbps baseline protection bandwidth is used (the LevelMainland parameter value is BASE30_MAX300): the value range is 30 to 300 in Gbps; When exclusive DDoS protection is enabled in the Chinese mainland and the 60 Gbps baseline protection bandwidth is used (the LevelMainland parameter value is BASE60_MAX600): the value range is 60 to 600 in Gbps; When the default protection of the platform is used (the LevelMainland parameter value is PLATFORM): configuration is not supported, and the value of this parameter is invalid.
LevelOverseas	String	No	Dedicated anti-DDoS specifications in global regions (excluding the Chinese mainland). PLATFORM: uses the default protection. Dedicated anti-DDoS is not enabled; ANYCAST300: uses dedicated anti-DDoS, which provides 300 Gbps protection bandwidth; ANYCAST_ALLIN: uses dedicated anti-DDoS, which provides all available protection resources. If this field is not specified, the default value 'PLATFORM' will be used.

DefaultServerCertInfo

HTTPS server certificate configuration

Used by actions: DescribeDefaultCertificates.

Name	Type	Required	Description
CertId	String	Yes	ID of the server certificate. Note: This field may return null, indicating that no valid values can be obtained.
Alias	String	No	Alias of the certificate. Note: This field may return null, indicating that no valid values can be obtained.
Type	String	No	Type of the certificate. Values: `default`: Default certificate; `upload`: Custom certificate; `managed`: Tencent Cloud-managed certificate. Note: This field may return null, indicating that no valid values can be obtained.
ExpireTime	Timestamp ISO8601	No	Time when the certificate expires. Note: This field may return null, indicating that no valid values can be obtained.
EffectiveTime	Timestamp ISO8601	No	Time when the certificate takes effect. Note: This field may return null, indicating that no valid values can be obtained.
CommonName	String	No	Common name of the certificate. Note: This field may return null, indicating that no valid values can be obtained.
SubjectAltName	Array of String	No	Domain names added to the SAN certificate. Note: This field may return null, indicating that no valid values can be obtained.
Status	String	No	Deployment status. Values: `processing`: Deployment in progress `deployed`: Deployed `failed`: Deployment failed Note: This field may return `null`, indicating that no valid value can be obtained.
Message	String	No	Failure description Note: This field may return null, indicating that no valid values can be obtained.
SignAlgo	String	No	Certificate algorithm. Note: This field may return `null`, indicating that no valid value can be obtained.

DeliveryCondition

Real-time log delivery conditions used to define the scope of log delivery. The relationship between items in a DeliveryCondition array is "or", whereas the relationship between items in an inner Conditions array is "and".

Used by actions: CreateRealtimeLogDeliveryTask, DescribeRealtimeLogDeliveryTasks, ModifyRealtimeLogDeliveryTask.

Name	Type	Required	Description
Conditions	Array of QueryCondition	No	Log filter criteria. The detailed filter criteria are as follows: EdgeResponseStatusCode: Filter by response status code returned from the EdgeOne node to the client. ?? Supported operators: equal, great, less, great_equal, less_equal ?? Valid values: any integer greater than or equal to 0 OriginResponseStatusCode: Filter by response status code of the origin server. ?? Supported operators: equal, great, less, great_equal, less_equal. ?? Valid values: any integer greater than or equal to -1 SecurityAction: Filter by final action after the request matches a security rule. ?? Supported operator: equal ?? Options: ?? -: unknown/not matched ?? Monitor: observation ?? JSChallenge: JavaScript challenge ?? Deny: blocking ?? Allow: allowing ?? BlockIP: IP blocking ?? Redirect: redirection ?? ReturnCustomPage: returning to a custom page ?? ManagedChallenge: managed challenge ?? Silence: silence ?? LongDelay: response after a long delay ?? ShortDelay: response after a short delay SecurityModule: Filter by name of the security module finally handling the request. ??Supported operator: equal ??Options: ?? -: unknown/not matched ?? CustomRule: Custom Rules in Web Protection ?? RateLimitingCustomRule: Rate Limiting Rules in Web Protection ?? ManagedRule: Managed Rules in Web Protection ?? L7DDoS: CC Attack Defense in Web Protection ?? BotManagement: Bot Basic Management in Bot Management ?? BotClientReputation: Client Reputation Analysis in Bot Management ?? BotBehaviorAnalysis: Bot Intelligent Analysis in Bot Management ?? BotCustomRule: Custom Bot Rules in Bot Management ?? BotActiveDetection: Active Detection in Bot Management

DeployRecord

Version release record details for the configuration group.

Used by actions: DescribeDeployHistory.

Name	Type	Description
ConfigGroupVersionInfos	Array of ConfigGroupVersionInfo	Details about the released version.
DeployTime	Timestamp ISO8601	Release time. The time format follows the ISO 8601 standard and is represented in Coordinated Universal Time (UTC).
Status	String	Release status. Valid values: deploying: Being released. failure: Release failed. success: Released successfully.
Message	String	Release result information.
RecordId	String	Release record ID. Note: this field may return null, indicating that no valid values can be obtained.
Description	String	Change description.

DetailHost

Domain name configuration information

Used by actions: DescribeHostsSetting.

Name	Type	Description
ZoneId	String	The site ID.
Status	String	The acceleration status. Values: `process`: In progress `online`: Enabled `offline`: Disabled
Host	String	The domain name.
ZoneName	String	Name of the site
Cname	String	The assigned CNAME
Id	String	The resource ID.
InstanceId	String	The instance ID.
Lock	Integer	The lock status.
Mode	Integer	The domain name status.
Area	String	The acceleration area of the domain name. Values: `global`: Global. `mainland`: Chinese mainland. `overseas`: Outside the Chinese mainland.
AccelerateType	AccelerateType	The acceleration type configuration item. Note: This field may return null, indicating that no valid values can be obtained.
Https	Https	The HTTPS configuration item. Note: This field may return null, indicating that no valid values can be obtained.
CacheConfig	CacheConfig	The cache configuration item. Note: This field may return null, indicating that no valid values can be obtained.
Origin	Origin	The origin configuration item. Note: This field may return null, indicating that no valid values can be obtained.
SecurityType	SecurityType	The security type. Note: This field may return null, indicating that no valid values can be obtained.
CacheKey	CacheKey	The cache key configuration item. Note: This field may return null, indicating that no valid values can be obtained.
Compression	Compression	The smart compression configuration item. Note: This field may return null, indicating that no valid values can be obtained.
Waf	Waf	The WAF protection configuration item. Note: This field may return null, indicating that no valid values can be obtained.
CC	CC	The CC protection configuration item. Note: This field may return null, indicating that no valid values can be obtained.
DDoS	DDoS	DDoS mitigation configuration Note: This field may return null, indicating that no valid values can be obtained.
SmartRouting	SmartRouting	The smart routing configuration item. Note: This field may return null, indicating that no valid values can be obtained.
Ipv6	Ipv6	The IPv6 access configuration item. Note: This field may return null, indicating that no valid values can be obtained.
ClientIpCountry	ClientIpCountry	Whether to carry the location information of the client IP during origin-pull. Note: This field may return `null`, indicating that no valid value can be obtained.

DiffIPWhitelist

Differences between the newest and existing intermediate IPs

Used by actions: DescribeOriginProtection.

Name	Type	Description
LatestIPWhitelist	IPWhitelist	The latest intermediate IPs.
AddedIPWhitelist	IPWhitelist	The intermediate IPs added to the existing list.
RemovedIPWhitelist	IPWhitelist	The intermediate IPs removed from the existing list.
NoChangeIPWhitelist	IPWhitelist	The intermediate IPs that remain unchanged.

DnsVerification

Used by actions: CreateAccelerationDomain, CreateZone, DescribeAccelerationDomains, DescribeZones.

Name	Type	Description
Subdomain	String	The host record.
RecordType	String	The record type.
RecordValue	String	The record value.

DropPageConfig

Block page configuration

Used by actions: ModifySecurityPolicy.

Name	Type	Required	Description
Switch	String	Yes	Whether to enable configuration. Values: `on`: Enable `off`: Disable
WafDropPageDetail	DropPageDetail	No	The settings of the block page that applies managed rules. If it is null, the settings that were last configured will be used. Note: This field may return null, indicating that no valid values can be obtained.
AclDropPageDetail	DropPageDetail	No	The settings of the block page that applies custom rules. If it is null, the settings that were last configured will be used. Note: This field may return null, indicating that no valid values can be obtained.

DropPageDetail

The configuration details of the block page

Used by actions: ModifySecurityPolicy.

Name	Type	Required	Description
PageId	Integer	Yes	The ID of the block page. Specify `0` to use the default block page. (Disused) If 0 is passed, the default block page will be used.
StatusCode	Integer	Yes	The HTTP status code to trigger the block page. Range: 100-600, excluding 3xx codes. Code 566: Requests blocked by managed rules. Code 567: Requests blocked by web security rules (except managed rules).
Name	String	Yes	The block page file or URL.
Type	String	Yes	Type of the block page. Values: `page`: Return the specified page.
CustomResponseId	String	No	ID of custom response. The ID can be obtained via the `DescribeCustomErrorPages` API. It's required when `Type=page`.

EntityStatus

Status of domain names bound with this template.

Used by actions: DescribeSecurityTemplateBindings.

Name	Type	Description
Entity	String	Instance name. Only subdomain names are supported.
Status	String	Instance configuration status. Values: `online`: Configuration has taken effect; `fail`: Configuration failed; `process`: Configuration is being delivered.
Message	String	Message returned after the operation completed.

EnvInfo

Environment information.

Used by actions: DescribeEnvironments.

Name	Type	Description
EnvId	String	Environment ID.
EnvType	String	Environment type. Valid values: production: Production environment. staging: Test environment.
Status	String	Environment status. Valid values: creating: Being created. running: The environment is stable, with version changes allowed. version_deploying: The version is currently being deployed, with no more changes allowed.
Scope	Array of String	Effective scope of the configuration in the current environment. Valid values: ALL: It takes effect on the entire network when EnvType is set to production. It returns the IP address of the test node for host binding during testing when EnvType is set to staging.
CurrentConfigGroupVersionInfos	Array of ConfigGroupVersionInfo	For the effective versions of each configuration group in the current environment, there are two possible scenarios based on the value of Status: When Status is set to version_deploying, the returned value of this field represents the previously effective version. In other words, during the deployment of the new version, the effective version is the one that was in effect before any changes were made. When Status is set to running, the value returned by this field is the currently effective version.
CreateTime	Timestamp ISO8601	Creation time. The time format follows the ISO 8601 standard and is represented in Coordinated Universal Time (UTC).
UpdateTime	Timestamp ISO8601	Update time. The time format follows the ISO 8601 standard and is represented in Coordinated Universal Time (UTC).

ErrorPageReference

Custom error page's referenced source

Used by actions: DescribeCustomErrorPages.

Name	Type	Description
BusinessId	String	Referenced business ID, such as the custom block rule ID.

ExceptConfig

Exception rules, which are used to bypass specific rules

Used by actions: ModifySecurityPolicy.

Name	Type	Required	Description
Switch	String	Yes	Whether to enable configuration. Values: `on`: Enable `off`: Disable
ExceptUserRules	Array of ExceptUserRule	No	The settings of the exception rule. If it is null, the settings that were last configured will be used. Note: This field may return null, indicating that no valid values can be obtained.

ExceptUserRule

The settings of the exception rule

Used by actions: ModifySecurityPolicy.

Name	Type	Required	Description
RuleName	String	Yes	The rule name.
Action	String	Yes	The rule action. It only supports the value `skip`, which indicates skipping all managed rules.
RuleStatus	String	Yes	The rule status. Values: `on`: Enabled `off`: Disabled
RuleID	Integer	No	The rule ID, which is automatically created and only used as an output parameter.
UpdateTime	Timestamp ISO8601	No	The update time. If it is null, the current date and time is recorded. Note: This field may return `null`, indicating that no valid value can be obtained.
ExceptUserRuleConditions	Array of ExceptUserRuleCondition	No	The matching condition. Note: This field may return null, indicating that no valid values can be obtained.
ExceptUserRuleScope	ExceptUserRuleScope	No	The scope to which the exception rule applies. Note: This field may return null, indicating that no valid values can be obtained.
RulePriority	Integer	No	The rule priority. Value range: 0-100. If it is null, it defaults to 0.

ExceptUserRuleCondition

The condition of the exception rule

Used by actions: ModifySecurityPolicy.

Name	Type	Required	Description
MatchFrom	String	No	The field to match. Values: `host`: Request domain name `sip`: Client IP `ua`: User-Agent `cookie`: Cookie `cgi`: CGI script `xff`: XFF header `url`: Request URL `accept`: Request content type `method`: Request method `header`: Request header `sip_proto`: Network layer protocol
MatchParam	String	No	The parameter of the field. Only when `MatchFrom = header`, the key contained in the header can be passed.
Operator	String	No	The logical operator. Values: `equal`: String equals `not_equal`: Value not equals `include`: String contains `not_include`: String not contains `match`: IP matches `not_match`: IP not matches `include_area`: Regions contain `is_empty`: Value left empty `not_exists`: Key fields not exist `regexp`: Regex matches `len_gt`: Value greater than `len_lt`: Value smaller than `len_eq`: Value equals `match_prefix`: Prefix matches `match_suffix`: Suffix matches `wildcard`: Wildcard
MatchContent	String	No	The value of the parameter.

ExceptUserRuleScope

The scope to which the exception rule applies

Used by actions: ModifySecurityPolicy.

Name	Type	Required	Description
Type	String	No	Exception mode. Values: `complete`: Skip the exception rule for full requests. `partial`: Skip the exception rule for partial requests.
Modules	Array of String	No	The module to be activated. Values: `waf`: Tencent Cloud-managed rules `rate`: Rate limiting rules `acl`: Custom rule `cc`: CC attack defense `bot`: Bot protection Note: this field may return `null`, indicating that no valid value is obtained.
PartialModules	Array of PartialModule	No	Module settings of the exception rule. If it is null, the settings that were last configured will be used. Note: This field may return `null`, indicating that no valid value can be obtained.
SkipConditions	Array of SkipCondition	No	Condition settings of the exception rule. If it is null, the settings that were last configured will be used. Note: This field may return `null`, indicating that no valid value can be obtained.

FailReason

Failure reason

Used by actions: CreatePrefetchTask, CreatePurgeTask.

Name	Type	Description
Reason	String	Failure reason.
Targets	Array of String	List of resources failed to be processed.

FileAscriptionInfo

Verification file, used to verify site ownership

Used by actions: DescribeIdentifications, IdentifyZone.

Name	Type	Description
IdentifyPath	String	Directory of the verification file.
IdentifyContent	String	Content of the verification file.

FileVerification

Information required for verifying via a file. It's applicable to sites connected via CNAMEs.

Used by actions: CreateAccelerationDomain, CreateZone, DescribeAccelerationDomains, DescribeZones.

Name	Type	Description
Path	String	EdgeOne obtains the file verification information in the format of "Scheme + Host + URL Path", (e.g. https://www.example.com/.well-known/teo-verification/z12h416twn.txt). This field is the URL path section of the URL you need to create.
Content	String	Content of the verification file. The contents of this field need to be filled into the text file returned by `Path`.

Filter

Key-value pair filters for conditional filtering queries, such as filtering ID, name, and status.
If more than one filter exists, the logical relationship between these filters is AND.
If multiple values exist in one filter, the logical relationship between these values under the same filter is OR.

Used by actions: DescribeApplicationProxies, DescribeDefaultCertificates, DescribeFunctionRules, DescribeFunctions, DescribeHostsSetting, DescribeIdentifications, DescribeL4Proxy, DescribeL4ProxyRules, DescribeLoadBalancerList, DescribeOriginProtection, DescribeRules.

Name	Type	Required	Description
Name	String	Yes	Fields to be filtered.
Values	Array of String	Yes	Value of the filtered field.

FirstPartConfig

The configuration to detect slow attacks based on the transfer period the first 8 KB of requests

Used by actions: ModifySecurityPolicy.

Name	Type	Required	Description
Switch	String	Yes	Switch. Values: `on`: Enable `off`: Disable Note: This field may return `null`, indicating that no valid value can be obtained.
StatTime	Integer	No	The transfer period threshold of the first 8 KB. If the threshold is reached, it’s considered a slow attack. Default: `5`. Note: This field may return `null`, indicating that no valid value can be obtained.

FollowOrigin

Following origin server configuration for caching.

Used by actions: DescribeHostsSetting, ModifyZoneSetting.

Name	Type	Required	Description
Switch	String	Yes	Whether to enable the configuration of following the origin server. Valid values: `on`: Enable `off`: Disable
DefaultCache	String	No	Whether to cache when an origin server does not return the Cache-Control header. This field is required when Switch is on; otherwise, it is ineffective. Valid values: on: Cache. off: Do not cache. Note: This field may return null, which indicates a failure to obtain a valid value.
DefaultCacheStrategy	String	No	Whether to use the default caching policy when an origin server does not return the Cache-Control header. This field is required when DefaultCache is set to on; otherwise, it is ineffective. When DefaultCacheTime is not 0, this field should be off. Valid values: on: Use the default caching policy. off: Do not use the default caching policy. Note: This field may return null, which indicates a failure to obtain a valid value.
DefaultCacheTime	Integer	No	The default cache time in seconds when an origin server does not return the Cache-Control header. The value ranges from 0 to 315360000. This field is required when DefaultCache is set to on; otherwise, it is ineffective. When DefaultCacheStrategy is on, this field should be 0. Note: This field may return null, which indicates a failure to obtain a valid value.

ForceRedirect

Forced HTTPS redirect configuration for access protocols.

Used by actions: DescribeZoneSetting, ModifyZoneSetting.

Name	Type	Required	Description
Switch	String	Yes	Whether to enable force HTTPS redirect. Values: `on`: Enable `off`: Disable
RedirectStatusCode	Integer	No	Redirect status code. Values: `301`: 301 redirect `302`: 302 redirect Note: This field may return null, indicating that no valid values can be obtained.

Function

Details of an edge function.

Used by actions: DescribeFunctions.

Name	Type	Description
FunctionId	String	Function ID.
ZoneId	String	Zone ID.
Name	String	Function name.
Remark	String	Function description.
Content	String	Function content.
Domain	String	Default domain name of a function.
CreateTime	String	Creation time, which adopts Coordinated Universal Time (UTC) and follows the date and time format of the ISO 8601 standard.
UpdateTime	String	Modification time, which adopts Coordinated Universal Time (UTC) and follows the date and time format of the ISO 8601 standard.

FunctionEnvironmentVariable

Environment variables of an edge function

Used by actions: DescribeFunctionRuntimeEnvironment, HandleFunctionRuntimeEnvironment.

Name	Type	Required	Description
Key	String	Yes	Variable name, which should be unique and can only contain uppercase and lowercase letters, digits, and special characters including at signs (@), periods (.), hyphens (-), and underscores (_). Its maximum size is 64 bytes.
Value	String	No	Variable value. Its maximum size is 5000 bytes. The default value is empty.
Type	String	No	Variable type. Valid values: string: string type; json: JSON object type. Default value: string.

FunctionRule

Trigger rules for an edge function

Used by actions: DescribeFunctionRules.

Name	Type	Description
RuleId	String	Rule ID.
FunctionRuleConditions	Array of FunctionRuleCondition	Rule condition list. There is an OR relationship between items in the list.
FunctionId	String	Function ID, specifying a function executed when a trigger rule condition is met.
Remark	String	Rule description.
FunctionName	String	Function name.
Priority	Integer	Priority of a trigger rule for a function. The larger the value, the higher the priority.
CreateTime	Timestamp ISO8601	Creation time, which adopts Coordinated Universal Time (UTC) and follows the date and time format of the ISO 8601 standard.
UpdateTime	Timestamp ISO8601	Update time, which adopts Coordinated Universal Time (UTC) and follows the date and time format of the ISO 8601 standard.

FunctionRuleCondition

Condition of a trigger rule for an edge function.

Used by actions: CreateFunctionRule, DescribeFunctionRules, ModifyFunctionRule.

Name	Type	Required	Description
RuleConditions	Array of RuleCondition	Yes	Condition of a trigger rule for an edge function. This condition is considered met if all items in the list are met.

Grpc

Configuration of gRPC support

Used by actions: DescribeZoneSetting, ModifyZoneSetting.

Name	Type	Required	Description
Switch	String	Yes	Whether to enable gRPC support. Valid values: `on`: Enable; `off`: Disable.

HTTP header, used as input for the CreatePrefetchTask API

Used by actions: CreatePrefetchTask, CreateRealtimeLogDeliveryTask, ModifyRealtimeLogDeliveryTask.

Name	Type	Required	Description
Name	String	Yes	HTTP header name.
Value	String	Yes	HTTP header value

HealthChecker

LoadBalancer health check policy.

Used by actions: CreateLoadBalancer, DescribeLoadBalancerList, ModifyLoadBalancer.

Name	Type	Required	Description
Type	String	Yes	Health check policy. Valid values: HTTP. HTTPS. TCP. UDP. ICMP Ping. NoCheck. Note: NoCheck means the health check policy is not enabled.
Port	Integer	No	Check port, which is required when Type = HTTP, Type = HTTPS, Type = TCP, or Type = UDP.
Interval	Integer	No	Check frequency, in seconds. It indicates how often a health check task is initiated. Valid values: 30, 60, 180, 300, 600.
Timeout	Integer	No	Timeout for each health check, in seconds. If the health check time exceeds this value, the check result is determined as "unhealthy". The default value is 5s, and the value should be less than Interval.
HealthThreshold	Integer	No	Healthy state threshold, in the number of times. It indicates that if the consecutive health check results are "healthy" for a certain number of times, an origin server is considered "healthy". The default value is 3 times, with the minimum value of 1 time.
CriticalThreshold	Integer	No	Unhealthy state threshold, in the number of times. It indicates that if the consecutive health check results are "unhealthy" for a certain number of times, an origin server is considered "unhealthy". The default value is 2 times.
Path	String	No	Probe path. This parameter is valid only when Type = HTTP or Type = HTTPS. It needs to include the complete host/path and should not contain a protocol, for example, www.example.com/test.
Method	String	No	Request method. This parameter is valid only when Type = HTTP or Type = HTTPS. Valid values: GET. HEAD.
ExpectedCodes	Array of String	No	The status codes used to determine that the probe result is healthy when the probe node initiates a health check to an origin server. This parameter is valid only when Type = HTTP or Type = HTTPS.
Headers	Array of CustomizedHeader	No	The custom HTTP request header carried by a probe request, with a maximum value of 10. This parameter is valid only when Type = HTTP or Type = HTTPS.
FollowRedirect	String	No	Whether to follow 301/302 redirect. When enabled, 301/302 is considered a "healthy" status code, redirecting 3 times by default. This parameter is valid only when Type = HTTP or Type = HTTPS.
SendContext	String	No	The content sent by a health check. Only ASCII visible characters are allowed, with up to 500 characters. This parameter is valid only when Type = UDP.
RecvContext	String	No	The expected return result from an origin server during health check. Only ASCII visible characters are allowed, with up to 500 characters. This parameter is valid only when Type = UDP.

Hsts

HSTS configuration

Used by actions: DescribeHostsSetting, ModifyZoneSetting.

Name	Type	Required	Description
Switch	String	Yes	Whether to enable the configuration. Values: `on`: Enable `off`: Disable
MaxAge	Integer	No	MaxAge (in seconds). The maximum value is 1 day. Note: This field may return `null`, indicating that no valid values can be obtained.
IncludeSubDomains	String	No	Whether to contain subdomain names. Values: `on`: Enable `off`: Disable Note: This field may return null, indicating that no valid values can be obtained.
Preload	String	No	Whether to enable preloading. Values: `on`: Enable `off`: Disable Note: This field may return null, indicating that no valid values can be obtained.

Https

Domain name HTTPS acceleration configuration. This is disabled by default.

Used by actions: DescribeHostsSetting, DescribeZoneSetting, ModifyZoneSetting.

Name	Type	Required	Description
Http2	String	No	Whether to enable HTTP2. Values: `on`: Enable `off`: Disable Note: This field may return null, indicating that no valid values can be obtained.
OcspStapling	String	No	Whether to enable OCSP. Values: `on`: Enable `off`: Disable Note: This field may return null, indicating that no valid values can be obtained.
TlsVersion	Array of String	No	TLS version. Valid values: `TLSv1`: TLSv1 version; `TLSV1.1`: TLSv1.1 version; `TLSV1.2`: TLSv1.2 version; `TLSv1.3`: TLSv1.3 version. Only consecutive versions can be enabled at the same time. Note: This field may return `null`, indicating that no valid values can be obtained.
Hsts	Hsts	No	HSTS Configuration Note: This field may return null, indicating that no valid values can be obtained.
CertInfo	Array of ServerCertInfo	No	The certificate configuration. Note: This field may return null, indicating that no valid values can be obtained.
ApplyType	String	No	Whether the certificate is managed by EdgeOne. Values: `apply`: Managed by EdgeOne. `none`: Not managed by EdgeOne. If it is left empty, the default value `none` is used. Note: This field may return `null`, indicating that no valid value can be obtained.
CipherSuite	String	No	The cipher suite, with values: loose-v2023: Provides high compatibility with general security, and supports TLS 1.0-1.3 cipher suites; general-v2023: Provides relatively high compatibility with moderate security, and supports TLS 1.2-1.3 cipher suites; strict-v2023: Provides high security, disables all cipher suites with security risks, and supports TLS 1.2-1.3 cipher suites. Note: This field may return null, which indicates a failure to obtain a valid value.

IPGroup

IP range group

Used by actions: CreateSecurityIPGroup, DescribeSecurityIPGroup, DescribeSecurityIPGroupInfo, ModifySecurityIPGroup.

Name	Type	Required	Description
GroupId	Integer	Yes	Group ID. Enter `0`.
Name	String	Yes	Group name.
Content	Array of String	Yes	IP group content. Only supports IP and IP mask.

IPRegionInfo

IP location information query

Used by actions: DescribeIPRegion.

Name	Type	Description
IP	String	IP address, IPV4 or IPV6.
IsEdgeOneIP	String	Whether the IP belongs to an EdgeOne node. Valid values: yes: This IP belongs to an EdgeOne node; no: This IP does not belong to an EdgeOne node.

IPWhitelist

Intermediate IPs

Used by actions: DescribeOriginProtection.

Name	Type	Description
IPv4	Array of String	List of IPv4 addresses
IPv6	Array of String	List of IPv6 addresses

Identification

The site verification information

Used by actions: DescribeIdentifications.

Name	Type	Description
ZoneName	String	The site name.
Domain	String	The subdomain name to be verified. To verify the ownership of a site, leave it blank. Note: This field may return `null`, indicating that no valid values can be obtained.
Status	String	The verification status. Values: `pending`: The verification is ongoing. `finished`: The verification completed.
Ascription	AscriptionInfo	Details of the DNS record.
OriginalNameServers	Array of String	The NS record of the domain name. Note: This field may return null, indicating that no valid values can be obtained.
FileAscription	FileAscriptionInfo	Details of the verification file.

ImageOptimize

Image optimization configuration.

Used by actions: DescribeZoneSetting, ModifyZoneSetting.

Name	Type	Required	Description
Switch	String	Yes	Whether to enable configuration. Values: `on`: Enable `off`: Disable

IntelligenceRule

Bot intelligence rules

Used by actions: ModifySecurityPolicy.

Name	Type	Required	Description
Switch	String	No	Switch. Values: `on`: Enable `off`: Disable Note: This field may return null, indicating that no valid values can be obtained.
IntelligenceRuleItems	Array of IntelligenceRuleItem	No	Items in a bot intelligence rule Note: This field may return null, indicating that no valid values can be obtained.

IntelligenceRuleItem

Bot intelligence rule items

Used by actions: ModifySecurityPolicy.

Name	Type	Required	Description
Label	String	Yes	The tag to categorize bots. Values: `evil_bot`: Malicious bot `suspect_bot`: Suspected bot `good_bot`: Good bot `normal`: Normal request
Action	String	Yes	The action taken on bots. Values `drop`: Block `trans`: Allow `alg`: JavaScript challenge `captcha`: Managed challenge `monitor`: Observe

IpTableConfig

IP/Region blocklist/allowlist configuration

Used by actions: ModifySecurityPolicy.

Name	Type	Required	Description
Switch	String	Yes	Switch. Values: `on`: Enable `off`: Disable Note: This field may return null, indicating that no valid values can be obtained.
IpTableRules	Array of IpTableRule	No	The settings of the basic access control rule. If it is null, the settings that were last configured will be used. Note: This field may return null, indicating that no valid values can be obtained.

IpTableRule

IP blocklist/allowlist rule details

Used by actions: ModifySecurityPolicy.

Name	Type	Required	Description
Action	String	Yes	The action. Values: `drop`: Block `trans`: Allow `monitor`: Observe
MatchFrom	String	Yes	The matching dimension. Values: `ip`: Match by IP. `area`: Match by IP region.
Operator	String	No	Matching method. It defaults to `equal` if it’s left empty. Values: `is_empty`: The field is empty. `not_exists`: The configuration item does not exist. `include`: Include `not_include`: Do not include `equal`: Equal to `not_equal`: Not equal to Note: This field may return null, indicating that no valid values can be obtained.
RuleID	Integer	No	The rule ID, which is only used as an output parameter.
UpdateTime	Timestamp ISO8601	No	The update time, which is only used as an output parameter.
Status	String	No	The rule status. A null value indicates that the rule is enabled. Values: `on`: Enabled `off`: Disabled Note: This field may return null, indicating that no valid values can be obtained.
RuleName	String	No	The rule name. Note: This field may return null, indicating that no valid values can be obtained.
MatchContent	String	No	Matching content. It’s not required when `Operator` is `is_emty` or `not_exists`.

Ipv6

The IPv6 access configuration.

Used by actions: CreateApplicationProxy, DescribeApplicationProxies, DescribeHostsSetting, DescribeZoneSetting, ModifyApplicationProxy, ModifyZoneSetting.

Name	Type	Required	Description
Switch	String	Yes	Whether to enable IPv6 access. Valid values: `on`: Enable; `off`: Disable.

JITVideoProcess

Just-in-time media processing configuration.

Used by actions: DescribeZoneSetting, ModifyZoneSetting.

Name	Type	Required	Description
Switch	String	Yes	Just-in-time media processing configuration switch. Valid values: on: Enable. off: Disable.

L4OfflineLog

The L7 log details

Used by actions: DownloadL4Logs.

Name	Type	Description
ProxyId	String	L4 proxy instance ID.
Area	String	Log query area. Valid values: `mainland`: Chinese mainland; `overseas`: Global (outside the Chinese mainland).
LogPacketName	String	Log packet name.
Url	String	Log download address.
LogTime	Integer	(Disused) Log packaging time.
LogStartTime	Timestamp ISO8601	Start time of log packaging.
LogEndTime	Timestamp ISO8601	End time of the log package.
Size	Integer	Log size (in bytes).

L4Proxy

Layer 4 proxy instance.

Used by actions: DescribeL4Proxy.

Name	Type	Required	Description
ZoneId	String	No	Zone ID.
ProxyId	String	No	Layer 4 proxy instance ID.
ProxyName	String	No	Layer 4 proxy instance name.
Area	String	No	Acceleration zone of the Layer 4 proxy instance. mainland: Availability zone in the Chinese mainland; overseas: Global availability zone (excluding the Chinese mainland); global: Global availability zone.
Cname	String	No	Access via CNAME.
Ips	Array of String	No	After the fixed IP address is enabled, this value will return the corresponding access IP address; if it is not enabled, this value will be empty.
Status	String	No	Status of the Layer 4 proxy instance. online: Enabled; offline: Disabled; progress: Deploying; stopping: Disabling; banned: Blocked; fail: Failed to deploy or disable.
Ipv6	String	No	Specifies whether to enable IPv6 access. on: Enable; off: Disable.
StaticIp	String	No	Specifies whether to enable the fixed IP address. on: Enable; off: Disable.
AccelerateMainland	String	No	Specifies whether to enable network optimization in the Chinese mainland. on: Enable off: Disable
DDosProtectionConfig	DDosProtectionConfig	No	Security protection configuration. Note: This field may return null, indicating that no valid value can be obtained.
L4ProxyRuleCount	Integer	No	Number of forwarding rules under the Layer 4 proxy instance.
UpdateTime	Timestamp ISO8601	No	Latest modification time.

L4ProxyRemoteAuth

L4 remote authentication information.

Used by actions: CreateL4ProxyRules, DescribeL4ProxyRules, ModifyL4ProxyRules.

Name	Type	Required	Description
Switch	String	Yes	Whether to enable L4 remote authentication. Valid values: on: Enable; off: Disable.
Address	String	Yes	Remote authentication service address, in the format of domain/ip:port, such as example.auth.com:8888.
ServerFaultyBehavior	String	Yes	Default origin-pull behavior based on L4 forwarding rules after the remote authentication service is disabled. Valid values: reject: Block and deny access; allow: Allow access.

L4ProxyRule

Details of Layer 4 proxy forwarding rules.

Used by actions: CreateL4ProxyRules, DescribeL4ProxyRules, ModifyL4ProxyRules.

Name	Type	Required	Description
RuleId	String	No	Forwarding rule ID. Note: Do not fill in this parameter when L4ProxyRule is used as an input parameter in CreateL4ProxyRules; it must be filled in when L4ProxyRule is used as an input parameter in ModifyL4ProxyRules.
Protocol	String	No	Forwarding protocol. Valid values: TCP: TCP protocol; UDP: UDP protocol. Note: This parameter must be filled in when L4ProxyRule is used as an input parameter in CreateL4ProxyRules; it is optional when L4ProxyRule is used as an input parameter in ModifyL4ProxyRules. If not specified, it will retain its existing value.
PortRange	Array of String	No	Forwarding port, which can be set as follows: A single port, such as 80; A range of ports, such as 81-85, representing ports 81, 82, 83, 84, 85. Note: This parameter must be filled in when L4ProxyRule is used as an input parameter in CreateL4ProxyRules; it is optional when L4ProxyRule is used as an input parameter in ModifyL4ProxyRules. If not specified, it will retain its existing value.
OriginType	String	No	Origin server type. Valid values: IP_DOMAIN: IP/Domain name origin server; ORIGIN_GROUP: Origin server group; LB: Cloud Load Balancer, currently only open to the allowlist. Note: This parameter must be filled in when L4ProxyRule is used as an input parameter in CreateL4ProxyRules; it is optional when L4ProxyRule is used as an input parameter in ModifyL4ProxyRules. If not specified, it will retain its existing value.
OriginValue	Array of String	No	Origin server address. When OriginType is set to IP_DOMAIN, enter the IP address or domain name, such as 8.8.8.8 or test.com; When OriginType is set to ORIGIN_GROUP, enter the origin server group ID, such as og-537y24vf5b41; When OriginType is set to LB, enter the Cloud Load Balancer instance ID, such as lb-2qwk30xf7s9g. Note: This parameter must be filled in when L4ProxyRule is used as an input parameter in CreateL4ProxyRules; it is optional when L4ProxyRule is used as an input parameter in ModifyL4ProxyRules. If not specified, it will retain its existing value.
OriginPortRange	String	No	Origin server port, which can be set as follows: A single port, such as 80; A range of ports, such as 81-85, representing ports 81, 82, 83, 84, 85. When inputting a range of ports, ensure that the length corresponds with that of the forwarding port range. For example, if the forwarding port range is 80-90, this port range should be 90-100. Note: This parameter must be filled in when L4ProxyRule is used as an input parameter in CreateL4ProxyRules; it is optional when L4ProxyRule is used as an input parameter in ModifyL4ProxyRules. If not specified, it will retain its existing value.
ClientIPPassThroughMode	String	No	Transmission of the client IP address. Valid values: TOA: Available only when Protocol=TCP; PPV1: Transmission via Proxy Protocol V1. Available only when Protocol=TCP; PPV2: Transmission via Proxy Protocol V2; SPP: Transmission via Simple Proxy Protocol. Available only when Protocol=UDP; OFF: No transmission. Note: This parameter is optional when L4ProxyRule is used as an input parameter in CreateL4ProxyRules, and if not specified, the default value OFF will be used; it is optional when L4ProxyRule is used as an input parameter in ModifyL4ProxyRules. If not specified, it will retain its existing value.
SessionPersist	String	No	Specifies whether to enable session persistence. Valid values: on: Enable; off: Disable. Note: This parameter is optional when L4ProxyRule is used as an input parameter in CreateL4ProxyRules, and if not specified, the default value off will be used; it is optional when L4ProxyRule is used as an input parameter in ModifyL4ProxyRules. If not specified, it will retain its existing value.
SessionPersistTime	Integer	No	Session persistence period, with a range of 30-3600, measured in seconds. Note: This parameter is optional when L4ProxyRule is used as an input parameter in CreateL4ProxyRules. It is valid only when SessionPersist is set to on and defaults to 3600 if not specified. It is optional when L4ProxyRule is used as an input parameter in ModifyL4ProxyRules. If not specified, it will retain its existing value.
RuleTag	String	No	Rule tag. Accepts 1-50 arbitrary characters. Note: This parameter is optional when L4ProxyRule is used as an input parameter in CreateL4ProxyRules; it is optional when L4ProxyRule is used as an input parameter in ModifyL4ProxyRules. If not specified, it will retain its existing value.
Status	String	No	Rule status. Valid values: online: Enabled; offline: Disabled; progress: Deploying; stopping: Disabling; fail: Failed to deploy or disable. Note: Do not set this parameter when L4ProxyRule is used as an input parameter in CreateL4ProxyRules and ModifyL4ProxyRules.
BuId	String	No	BuID.
RemoteAuth	L4ProxyRemoteAuth	No	Remote authentication information. Note: RemoteAuth cannot be used as an input parameter in CreateL4ProxyRules or ModifyL4ProxyRules. If this parameter is input, it will be ignored. If the returned data of DescribeL4ProxyRules is empty, it indicates that remote authentication is disabled. Note: This field may return null, which indicates a failure to obtain a valid value.

L7OfflineLog

Details of L7 logs.

Used by actions: DownloadL7Logs.

Name	Type	Description
Domain	String	Log domain name.
Area	String	Log query area. Valid values: `mainland`: Chinese mainland; `overseas`: Global (outside the Chinese mainland).
LogPacketName	String	Log packet name.
Url	String	Log download address.
LogTime	Integer	(Disused) Log packaging time.
LogStartTime	Timestamp ISO8601	Start time of log packaging.
LogEndTime	Timestamp ISO8601	End time of the log package.
Size	Integer	Original log size (in bytes).

LoadBalancer

LoadBalancer information.

Used by actions: DescribeLoadBalancerList.

Name	Type	Description
InstanceId	String	LoadBalancer ID.
Name	String	LoadBalancer name, which can contain 1 to 200 characters, including a-z, A-Z, 0-9, underscores (_), and hyphens (-).
Type	String	LoadBalancer type. Valid values: HTTP: HTTP-specific LoadBalancer. It supports adding HTTP-specific and general origin server groups. It can only be referenced by site acceleration services (such as domain name service and rule engine). GENERAL: general LoadBalancer. It only supports adding general origin server groups. It can be referenced by site acceleration services (such as domain name service and rule engine) and Layer-4 proxy.
HealthChecker	HealthChecker	Health check policy. For details, refer to Health Check Policies.
SteeringPolicy	String	Traffic scheduling policy among origin server groups. Valid values: Priority: Perform failover according to priority.
FailoverPolicy	String	Request retry policy when access to an origin server fails. For details, refer to Introduction to Request Retry Strategy. Valid values: OtherOriginGroup: After a single request fails, retry with another origin server within the next lower priority origin server group. OtherRecordInOriginGroup: After a single request fails, retry with another origin server within the same origin server group.
OriginGroupHealthStatus	Array of OriginGroupHealthStatus	Origin server group health status.
Status	String	LoadBalancer status. Valid values: Pending: deploying. Deleting: deleting. Running: effective.
L4UsedList	Array of String	List of Layer-4 proxy instances bound to a LoadBalancer.
L7UsedList	Array of String	List of Layer-7 domain names bound to a LoadBalancer.

LogFormat

Output format for real-time log delivery. You can directly use the specified predefined log output format (JSON Lines / csv) through the FormatType parameter, or define a variant output format through additional parameters based on the predefined log output format.

Used by actions: CreateRealtimeLogDeliveryTask, DescribeRealtimeLogDeliveryTasks, ModifyRealtimeLogDeliveryTask.

Name	Type	Required	Description
FormatType	String	Yes	Predefined output format for log shipping. Valid values: json: Use JSON Lines as the predefined log output format. In each log entry, fields are displayed as key-value pairs. csv: Use the predefined log output format csv, where each log entry only is presented as field values only, excluding field names.
BatchPrefix	String	No	A string added before each log delivery batch. Each log delivery batch may contain multiple log records.
BatchSuffix	String	No	A string appended after each log delivery batch.
RecordPrefix	String	No	A string added before each log record.
RecordSuffix	String	No	A string appended after each log record.
RecordDelimiter	String	No	A string inserted between log records as a separator. Valid values: \n: line break; \t: tab character; ,: Half-width comma.
FieldDelimiter	String	No	A string inserted between fields as a separator within a single log record. Valid values: \t: tab character; ,: half-width comma; ;: Half-width semicolon.

MaxAge

Browser cache rule configuration, which is used to set the default value of MaxAge and is disabled by default.

Used by actions: DescribeZoneSetting, ModifyZoneSetting.

Name	Type	Required	Description
FollowOrigin	String	No	Whether to follow the origin server. Values: `on`: Follow the origin server and ignore the field MaxAgeTime; `off`: Do not follow the origin server and apply the field MaxAgeTime.
MaxAgeTime	Integer	No	Specifies the maximum amount of time (in seconds). The maximum value is 365 days. Note: The value `0` means not to cache.

MutualTLS

Used by actions: ModifyHostsCertificate.

Name	Type	Required	Description
Switch	String	Yes
CertInfos	Array of CertificateInfo	No	Mutual authentication certificate list. Note: When using MutualTLS as an input parameter in ModifyHostsCertificate, you only need to provide the CertId of the corresponding certificate. You can check the CertId from the SSL Certificate List.

NoCache

No-cache configuration

Used by actions: DescribeHostsSetting, ModifyZoneSetting.

Name	Type	Required	Description
Switch	String	Yes	Whether to enable no-cache configuration. Valid values: `on`: Enable `off`: Disable

NormalAction

Common action of the rule engine

Used by actions: CreateRule, DescribeRules, ModifyRule.

Name	Type	Required	Description
Action	String	Yes	Feature name. For details, see DescribeRulesSetting API
Parameters	Array of RuleNormalActionParams	Yes	Parameter

NsVerification

Information required for switching DNS servers. It's applicable to sites connected via NSs.

Used by actions: CreateAccelerationDomain, CreateZone, DescribeAccelerationDomains, DescribeZones.

Name	Type	Description
NameServers	Array of String	The DNS server address assigned to the user when connecting a site to EO via NS. You need to switch the NameServer of the domain name to this address.

OfflineCache

Offline cache feature status switch.

Used by actions: DescribeZoneSetting, ModifyZoneSetting.

Name	Type	Required	Description
Switch	String	Yes	Whether offline cache is enabled. Valid values: `on`: Enable `off`: Disable

Origin

The origin server configuration.

Used by actions: DescribeHostsSetting, DescribeZoneSetting, ModifyZoneSetting.

Name	Type	Required	Description
Origins	Array of String	No	Primary origin server list Note: This field may return null, indicating that no valid values can be obtained.
BackupOrigins	Array of String	No	The list of backup origin servers. Note: This field may return null, indicating that no valid values can be obtained.
OriginPullProtocol	String	No	Origin-pull protocol configuration. Values: `http`: Force HTTP for origin-pull. `follow`: Follow protocol. `https`: Force HTTPS for origin-pull. Note: This field may return `null`, indicating that no valid value can be obtained.
CosPrivateAccess	String	No	Whether to allow private access to buckets when `OriginType=cos`. Valid values: `on`: Private access; `off`: Public access. Note: This field may return `null`, indicating that no valid values can be obtained.

OriginDetail

Details of the origin.

Used by actions: DescribeAccelerationDomains.

Name	Type	Description
OriginType	String	Origin server type. Valid values: IP_DOMAIN: IPv4, IPv6, or domain name type origin server; COS: Tencent Cloud COS origin server; AWS_S3: AWS S3 COS origin server; ORIGIN_GROUP: origin server group; VOD: Video on Demand; SPACE: origin server uninstallation, currently only available to the allowlist; LB: load balancing. Currently only available to the allowlist.
Origin	String	Origin server address, which varies with the value of OriginType: When OriginType = IP_DOMAIN, this parameter is an IPv4 address, an IPv6 address, or a domain name. When OriginType = COS, this parameter is the access domain name of the COS bucket. When OriginType = AWS_S3, this parameter is the access domain name of the S3 bucket. When OriginType = ORIGIN_GROUP, this parameter is the origin server group ID. When OriginType = VOD, this parameter is the VOD application ID.
BackupOrigin	String	Secondary origin group ID. This parameter is valid only when OriginType is ORIGIN_GROUP and a secondary origin group is configured.
OriginGroupName	String	Primary origin group name. This parameter returns a value when OriginType is ORIGIN_GROUP.
BackOriginGroupName	String	Secondary origin group name. This parameter is valid only when OriginType is ORIGIN_GROUP and a secondary origin group is configured.
PrivateAccess	String	Whether access to the private object storage origin server is allowed. This parameter is valid only when the origin server type OriginType is COS or AWS_S3. Valid values: on: Enable private authentication; off: Disable private authentication. If this field is not specified, the default value 'off' will be used.
PrivateParameters	Array of PrivateParameter	Private authentication parameter. This parameter is valid only when PrivateAccess is on. Note: This field may return null, indicating that no valid values can be obtained.

OriginGroup

Origin group information.

Used by actions: DescribeOriginGroup.

Name	Type	Description
GroupId	String	The ID of the origin group.
Name	String	The name of the origin group.
Type	String	The origin group type. Values: `GENERAL`: General origin group `HTTP`: HTTP-specific origin group
Records	Array of OriginRecord	Details of the origin record.
References	Array of OriginGroupReference	List of instances referencing this origin group.
CreateTime	Timestamp ISO8601	Creation time of the origin group.
UpdateTime	Timestamp ISO8601	The update time of the origin group.
HostHeader	String	Origin-pull host header Note: This field may return·null, indicating that no valid values can be obtained.

OriginGroupHealthStatus

Origin server group health status.

Used by actions: DescribeLoadBalancerList.

Name	Type	Description
OriginGroupID	String	Origin server group ID.
OriginGroupName	String	Origin server group name.
OriginType	String	Origin server group type. Valid values: HTTP: HTTP-specific. GENERAL: general.
Priority	String	Priority.
OriginHealthStatus	Array of OriginHealthStatus	Health status of each origin server in an origin server group.

OriginGroupHealthStatusDetail

Details of origin server group health status.

Used by actions: DescribeOriginGroupHealthStatus.

Name	Type	Description
OriginGroupId	String	Origin server group ID.
OriginHealthStatus	Array of OriginHealthStatus	The health status of each origin server in an origin server group, which is comprehensively decided based on the results of all detection regions. If more than half of the regions determine that the origin server is unhealthy, the corresponding status is unhealthy; otherwise, it is healthy.
CheckRegionHealthStatus	Array of CheckRegionHealthStatus	Health status of origin servers in each health check region.

OriginGroupInLoadBalancer

The origin server groups that need to be bound in a LoadBalancer and their priorities.

Used by actions: CreateLoadBalancer, ModifyLoadBalancer.

Name	Type	Required	Description
Priority	String	Yes	Priority, in the format of "priority_" + "number". The highest priority is "priority_1". Reference values: priority_1: first priority. priority_2: second priority. priority_3: third priority. You can increase numbers for other priorities, up to "priority_10".
OriginGroupId	String	Yes	Origin server group ID.

OriginGroupReference

Services referencing this origin group

Used by actions: DescribeOriginGroup.

Name	Type	Description
InstanceType	String	Services referencing the origin group. Values: `AccelerationDomain`: Acceleration domain name `RuleEngine`: Rules engine `Loadbalance`: Load balancer `ApplicationProxy`: L4 proxy
InstanceId	String	ID of the instances referencing the origin group
InstanceName	String	Name of the instance referencing the origin group

OriginHealthStatus

Health status of origin servers in an origin server group.

Used by actions: DescribeLoadBalancerList, DescribeOriginGroupHealthStatus.

Name	Type	Description
Origin	String	Origin server.
Healthy	String	Origin server health status. Valid values: Healthy: healthy. Unhealthy: unhealthy. Undetected: no data detected.

OriginInfo

Details of the origin.

Used by actions: CreateAccelerationDomain, ModifyAccelerationDomain.

Name	Type	Required	Description
OriginType	String	Yes	Origin server type, with values: IP_DOMAIN: IPv4, IPv6, or domain name type origin server; COS: Tencent Cloud COS origin server; AWS_S3: AWS S3 origin server; ORIGIN_GROUP: origin server group type origin server; VOD: Video on Demand; SPACE: origin server uninstallation. Currently only available to the allowlist; LB: load balancing. Currently only available to the allowlist.
Origin	String	Yes	Origin server address, which varies according to the value of OriginType: When OriginType = IP_DOMAIN, fill in an IPv4 address, an IPv6 address, or a domain name; When OriginType = COS, fill in the access domain name of the COS bucket; When OriginType = AWS_S3, fill in the access domain name of the S3 bucket; When OriginType = ORIGIN_GROUP, fill in the origin server group ID; When OriginType = VOD, fill in the VOD application ID; When OriginType = LB, fill in the Cloud Load Balancer instance ID. This feature is currently only available to the allowlist; When OriginType = SPACE, fill in the origin server uninstallation space ID. This feature is currently only available to the allowlist.
BackupOrigin	String	No	The ID of the secondary origin group. This parameter is valid only when OriginType is ORIGIN_GROUP. This field indicates the old version capability, which cannot be configured or modified on the control panel after being called. Please submit a ticket if required.
PrivateAccess	String	No	Whether access to the private Cloud Object Storage origin server is allowed. This parameter is valid only when OriginType is COS or AWS_S3. Valid values: on: Enable private authentication; off: Disable private authentication. If it is not specified, the default value is off.
PrivateParameters	Array of PrivateParameter	No	Private authentication parameter. This parameter is valid only when PrivateAccess is on.

OriginProtectionInfo

Origin protection configuration

Used by actions: DescribeOriginProtection.

Name	Type	Description
ZoneId	String	ID of the site.
Hosts	Array of String	List of domain names.
ProxyIds	Array of String	List of proxy IDs.
CurrentIPWhitelist	IPWhitelist	The existing intermediate IPs. Note: This field may return `null`, indicating that no valid values can be obtained.
NeedUpdate	Boolean	Whether the intermediate IP update is needed for the site. Values: `true`: Update needed; `false`: Update not needed.
Status	String	Status of the origin protection configuration. Values: `online`: Origin protection is activated; `offline`: Origin protection is disabled. `nonactivate`: Origin protection is not activated. This value is returned only when the feature is not activated before it’s used.
PlanSupport	Boolean	Whether origin protection is supported in the plan. Values: `true`: Origin protection supported; `false`: Origin protection not supported.
DiffIPWhitelist	DiffIPWhitelist	Differences between the latest and existing intermediate IPs. Note: This field may return `null`, indicating that no valid values can be obtained.

OriginRecord

Origin group record

Used by actions: CreateOriginGroup, DescribeOriginGroup, ModifyOriginGroup.

Name	Type	Required	Description
Record	String	Yes	The origin record value, which can be an IPv4/IPv6 address or a domain name.
Type	String	No	The origin type. Values: `IP_DOMAIN`: IPv4/IPv6 address or domain name `COS`: COS bucket address `AWS_S3`: AWS S3 bucket address
RecordId	String	No	The origin record ID.
Weight	Integer	No	Weight of an origin. Range: 0-100. If it is not specified, a random weight is assigned. If `0` is passed in, there is no traffic scheduled to this origin. Note: This field may return·null, indicating that no valid values can be obtained.
Private	Boolean	No	Whether to enable private authentication. It is valid when `OriginType=COS/AWS_S3`. Values: `true`: Yes. `false`: No. Default: `false`.
PrivateParameters	Array of PrivateParameter	No	Private authentication parameters. This field is valid when `Private=true`.

OwnershipVerification

Information of domain name ownership verification.

Used by actions: CreateAccelerationDomain, CreateZone, DescribeAccelerationDomains, DescribeZones.

Name	Type	Description
DnsVerification	DnsVerification	u200cInformation required for authentication using DNS resolution. It's applicable to sites connected via CNAME. See Ownership Verification. Note: This field may return·null, indicating that no valid values can be obtained.
FileVerification	FileVerification	u200cInformation required for verifying via a file. It's applicable to sites connected via CNAMEs. See Ownership Verification. Note: This field may return·null, indicating that no valid values can be obtained.
NsVerification	NsVerification	u200cInformation required for switching DNS servers. It's applicable to sites connected via NSs. For details, see Modifying DNS Server. Note: This field may return·null, indicating that no valid values can be obtained.

PartialModule

Module settings of the exception rule

Used by actions: ModifySecurityPolicy.

Name	Type	Required	Description
Module	String	No	The module. Values: `waf`: Managed rules
Include	Array of Integer	No	List of managed rule IDs to be skipped. Note: This field may return `null`, indicating that no valid value can be obtained.

PlanInfo

EdgeOne plan information

Used by actions: DescribeAvailablePlans.

Name	Type	Description
Currency	String	Settlement currency. Values: `CNY`: Settled by Chinese RMB; `USD`: Settled by US dollars.
Flux	Integer	Traffic quota of the plan. It includes the traffic for security acceleration, content acceleration and smart acceleration. Unit: byte.
Frequency	String	Settlement cycle. Values: `y`: Settled by year; `m`: Settled by month; `h`: Settled by hour; `M`: Settled by minute; `s`: Settled by second.
PlanType	String	The plan option. Values: `sta`: Standard plan that supports content delivery network outside the Chinese mainland. `sta_with_bot`: Standard plan that supports content delivery network outside the Chinese mainland and bot management. `sta_cm`: Standard plan that supports content delivery network inside the Chinese mainland. `sta_cm_with_bot`: Standard plan that supports content delivery network inside the Chinese mainland and bot management. `sta`: Standard plan that supports content delivery network over the globe. `sta_global_with_bot`: Standard plan that supports content delivery network over the globe and bot management. `ent`: Enterprise plan that supports content delivery network outside the Chinese mainland. `ent_with_bot`: Enterprise plan that supports content delivery network outside the Chinese mainland and bot management. `ent_cm`: Enterprise plan that supports content delivery network inside the Chinese mainland. `ent_cm_with_bot`: Enterprise plan that supports content delivery network inside the Chinese mainland and bot management. `ent_global`: Enterprise plan that supports content delivery network over the globe. `ent_global_with_bot`: Enterprise plan that supports content delivery network over the globe and bot management.
Price	Float	Plan price (in CNY fen/US cent). The price unit depends on the settlement currency.
Request	Integer	Quota on security acceleration requests
SiteNumber	Integer	Number of sites to be bound to the plan
Area	String	The acceleration region. Values: `mainland`: Chinese mainland `overseas`: Global (Chinese mainland not included) `global`: Global (Chinese mainland included)

PostMaxSize

Maximum size of the file uploaded for streaming via a POST request

Used by actions: DescribeZoneSetting, ModifyZoneSetting.

Name	Type	Required	Description
Switch	String	Yes	Whether to enable POST upload limit (default limit: 32 MB). Valid values: `on`: Enable; `off`: Disable.
MaxSize	Integer	No	Maximum size. Value range: 1-500 MB. Note: This field may return null, indicating that no valid values can be obtained.

PrepaidPlanParam

Prepaid Plan Billing Parameters

Used by actions: CreatePlan.

Name	Type	Required	Description
Period	Integer	No	Prepaid plan duration, unit: month. Valid values: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 24, 36. If this field is not specified, the default value '1' will be used.
RenewFlag	String	No	The auto-renewal flag for prepaid plan has the following values: on: Enable auto-renewal; off: Disable auto-renewal. If this field is not specified, the default value 'off' will be used. When auto-renewal is enabled, it defaults to renewing for one month.

PrivateParameter

Private authentication parameters for Cloud Object Storage origin server

Used by actions: CreateAccelerationDomain, CreateOriginGroup, DescribeAccelerationDomains, DescribeOriginGroup, ModifyAccelerationDomain, ModifyOriginGroup.

Name	Type	Required	Description
Name	String	Yes	The name of the private authentication parameter. Valid values: AccessKeyId: Access Key ID for authentication; SecretAccessKey: Secret Access Key for authentication; SignatureVersion: Authentication version, v2 or v4; Region: The region of the storage bucket.
Value	String	Yes	The parameter value.

QueryCondition

The query condition

Used by actions: CreateRealtimeLogDeliveryTask, DescribeOverviewL7Data, DescribeTimingL4Data, DescribeTimingL7AnalysisData, DescribeTimingL7CacheData, DescribeTopL7AnalysisData, DescribeTopL7CacheData, ModifyRealtimeLogDeliveryTask.

Name	Type	Required	Description
Key	String	Yes	The key of QueryCondition.
Operator	String	Yes	The conditional operator. Values: `equals`: Equals `notEquals`: Does not equal `include`: Contains `notInclude`: Does not contain `startWith`: Starts with `notStartWith`: Does not start with `endWith`: Ends with `notEndWith`: Does not end with
Value	Array of String	Yes	The value of QueryCondition.

QueryString

Request parameter contained in CacheKey

Used by actions: DescribeHostsSetting, ModifyZoneSetting.

Name	Type	Required	Description
Switch	String	Yes	Whether to use `QueryString` as part of `CacheKey`. Values: `on`: Yes `off`: No
Action	String	No	Specifies how to use query strings in the cache key. Values: `includeCustom`: `Include partial query strings.</li><li>`excludeCustom`: Exclude partial query strings. Note: This field may return null, indicating that no valid values can be obtained.
Value	Array of String	No	Array of query strings used/excluded Note: This field may return null, indicating that no valid values can be obtained.

Quic

QUIC configuration item

Used by actions: DescribeZoneSetting, ModifyZoneSetting.

Name	Type	Required	Description
Switch	String	Yes	Whether to enable QUIC. Valid values: `on`: Enable; `off`: Disable.

Quota

Purging/Pre-warming available usage and quota

Used by actions: DescribeContentQuota.

Name	Type	Description
Batch	Integer
Daily	Integer	Daily submission quota limit.
DailyAvailable	Integer	Remaining daily submission quota.
Type	String	Type of cache purging/pre-warming. Values: `purge_prefix`: Purge by prefix `purge_url`: Purge by URL `purge_host`: Purge by hostname `purge_all`: Purge all caches `purge_cache_tag`: Purge by cache tag `prefetch_url`: Pre-warm by URL

RateLimitConfig

Rate limiting rules

Used by actions: ModifySecurityPolicy.

Name	Type	Required	Description
Switch	String	Yes	Switch. Values: `on`: Enable `off`: Disable
RateLimitUserRules	Array of RateLimitUserRule	No	The settings of the custom rate limiting rule. If it is null, the settings that were last configured will be used.
RateLimitTemplate	RateLimitTemplate	No	The settings of the rate limiting template. If it is null, the settings that were last configured will be used. Note: This field may return null, indicating that no valid values can be obtained.
RateLimitIntelligence	RateLimitIntelligence	No	The client filtering settings. If it is null, the settings that were last configured will be used. Note: This field may return null, indicating that no valid values can be obtained.
RateLimitCustomizes	Array of RateLimitUserRule	No	The custom rate limiting rules. If it is `null`, the previous settings is used. Note: This field may return `null`, indicating that no valid value can be obtained.

RateLimitIntelligence

Client filtering

Used by actions: ModifySecurityPolicy.

Name	Type	Required	Description
Switch	String	Yes	Whether to enable configuration. Values: `on`: Enable `off`: Disable
Action	String	Yes	Action to be executed. Values: `monitor`: Observe `alg`: Challenge
RuleId	Integer	No	The rule ID, which is only used as a response parameter.

RateLimitTemplate

Rate limit template

Used by actions: ModifySecurityPolicy.

Name	Type	Required	Description
Mode	String	Yes	The mode. Values: `sup_loose`: Super loose `loose`: Loose `emergency`: Emergency `normal`: Moderate `strict`: Strict `close`: Off
Action	String	No	The action. Values: `alg`: JavaScript challenge `monitor`: Observe If it is left empty, the default value `alg` is used.
RateLimitTemplateDetail	RateLimitTemplateDetail	No	The settings of the rate limiting template. It is only used as an output parameter.

RateLimitTemplateDetail

The settings of the rate limiting template

Used by actions: ModifySecurityPolicy.

Name	Type	Required	Description
Mode	String	Yes	Template level name. Valid values: sup_loose: super loose; loose: loose; emergency: emergency; normal: normal; strict: strict; close: disabled, effective only for precise rate limiting. Note: This field may return null, which indicates a failure to obtain a valid value.
ID	Integer	Yes	Unique ID.
Action	String	Yes	Template action. Valid values: alg: JavaScript challenge; monitor: observation. Note: This field may return null, which indicates a failure to obtain a valid value.
PunishTime	Integer	Yes	Penalty duration, in seconds. Value range: 0-2 days. Note: This field may return null, which indicates a failure to obtain a valid value.
Threshold	Integer	Yes	Statistical threshold, in times. Value range: 0-4294967294.
Period	Integer	Yes	Statistical cycle. Value range: 0-120 seconds.

RateLimitUserRule

Rate limit rule

Used by actions: ModifySecurityPolicy.

Name	Type	Required	Description
Threshold	Integer	Yes	The request threshold. Value range: 0-4294967294.
Period	Integer	Yes	The statistical period. The value can be 10, 20, 30, 40, 50, or 60 seconds.
RuleName	String	Yes	The rule name, which consists of only letters, digits, and underscores and cannot start with an underscore.
Action	String	Yes	Action. Values: `monitor`: Observe; `drop`: Block; `redirect`: Redirect; `page`: Return a specific page; `alg`: JavaScript challenge.
PunishTime	Integer	Yes	The amount of time taken to perform the action. Value range: 0 seconds - 2 days.
PunishTimeUnit	String	Yes	The time unit. Values: `second`: Second `minutes`: Minute `hour`: Hour
RuleStatus	String	Yes	The rule status. Values: `on`: Enabled `off`: Disabled Default value: `on`
AclConditions	Array of AclCondition	Yes	The rule details.
RulePriority	Integer	Yes	The rule weight. Value range: 0-100.
RuleID	Integer	No	Rule ID, which is only used as an output parameter.
FreqFields	Array of String	No	The filter. Values: `sip`: Client IP This parameter is left empty by default.
UpdateTime	String	No	Update time. It is only used as a response parameter, and defaults to the current time.
FreqScope	Array of String	No	Query scope. Values: `source_to_eo`: (Response) Traffic going from the origin to EdgeOne. `client_to_eo`: (Request) Traffic going from the client to EdgeOne. Default: `source_to_eo`.
Name	String	No	Name of the custom return page. It's required when `Action=page`.
CustomResponseId	String	No	ID of custom response. The ID can be obtained via the `DescribeCustomErrorPages` API. It's required when `Action=page`.
ResponseCode	Integer	No	The response code to trigger the return page. It's required when `Action=page`. Value: 100-600. 3xx response codes are not supported. Default value: 567.
RedirectUrl	String	No	The redirection URL. It's required when `Action=redirect`.

RealtimeLogDeliveryTask

Real-time log delivery task

Used by actions: DescribeRealtimeLogDeliveryTasks.

Name	Type	Description
TaskId	String	ID of a real-time log shipping task.
TaskName	String	Name of a real-time log shipping task.
DeliveryStatus	String	Status of a real-time log shipping task. Valid values: enabled: enabled; disabled: disabled; deleted: deleted abnormally. Check whether the destination log set/log topic of Tencent Cloud CLS has been deleted.
TaskType	String	Type of a real-time log shipping task. Valid values: cls: push to Tencent Cloud CLS; custom_endpoint: push to a custom HTTP(S) address; s3: push to an AWS S3-compatible bucket address.
EntityList	Array of String	List of entities (L7 domain names or L4 proxy instances) corresponding to a real-time log shipping task. Valid value examples: L7 domain name: domain.example.com; L4 proxy instance: sid-2s69eb5wcms7.
LogType	String	Data shipping type. Valid values: domain: site acceleration logs; application: L4 proxy logs; web-rateLiming: rate limiting and CC attack defense logs; web-attack: managed rule logs; web-rule: custom rule logs; web-bot: Bot management logs.
Area	String	Data shipping area. Valid values: mainland: within the Chinese mainland; overseas: global (excluding the Chinese mainland).
Fields	Array of String	List of predefined fields for shipping.
CustomFields	Array of CustomField	List of custom fields for shipping.
DeliveryConditions	Array of DeliveryCondition	Filter criteria of log shipping.
Sample	Integer	Sampling ratio in permille. Value range: 1-1000. For example, 605 indicates a sampling ratio of 60.5%.
LogFormat	LogFormat	Output format for log delivery. When the output parameter is null, the default format is used, which works as follows: When TaskType is 'custom_endpoint', the default format is an array of JSON objects, with each JSON object representing a log entry; When TaskType is 's3', the default format is JSON Lines. Note: This field may return 'null', which indicates a failure to obtain a valid value.
CLS	CLSTopic	Configuration information of the CLS. Note: This field may return null, which indicates a failure to obtain a valid value.
CustomEndpoint	CustomEndpoint	Configuration information of the custom HTTP service. Note: This field may return null, which indicates a failure to obtain a valid value.
S3	S3	Configuration information of the AWS S3-compatible bucket. Note: This field may return null, which indicates a failure to obtain a valid value.
CreateTime	Timestamp ISO8601	Creation time.
UpdateTime	Timestamp ISO8601	Update time.

RenewFlag

Auto-renewal configuration item in a prepaid plan.

Used by actions: ModifyPlan.

Name	Type	Required	Description
Switch	String	Yes	The auto-renewal flag for prepaid plan has the following values: on: Enable auto-renewal; off: Disable auto-renewal.

Resource

Billable resource

Used by actions: DescribeZones.

Name	Type	Description
Id	String	The resource ID.
PayMode	Integer	Billing mode `0`: Pay-as-you-go
CreateTime	Timestamp ISO8601	The creation time.
EnableTime	Timestamp ISO8601	The effective time.
ExpireTime	Timestamp ISO8601	The expiration time.
Status	String	The plan status. Values: `normal`: Normal `isolated`: Isolated `destroyed`: Terminated
Sv	Array of Sv	Pricing query parameter
AutoRenewFlag	Integer	Whether to enable auto-renewal. Values: `0`: Default status. `1`: Enable auto-renewal. `2`: Disable auto-renewal.
PlanId	String	ID of the resource associated with the plan.
Area	String	Applicable area. Values: `mainland`: Chinese mainland `overseas`: Regions outside the Chinese mainland `global`: Global
Group	String	The resource type. Values: `plan`: Plan resources `pay-as-you-go`: Pay-as-you-go resources `value-added`: Value-added resources Note: This field may return null, indicating that no valid values can be obtained.
ZoneNumber	Integer	The sites that are associated with the current resources. Note: This field may return null, indicating that no valid values can be obtained.
Type	String	Resource tag type. Valid values: vodeo: vodeo resource.

RewriteAction

Rule engine action for the HTTP request/response header

Used by actions: CreateRule, DescribeRules, ModifyRule.

Name	Type	Required	Description
Action	String	Yes	Feature name. For details, see DescribeRulesSetting API
Parameters	Array of RuleRewriteActionParams	Yes	Parameter

Rule

Rule item of the rule engine. The items in the Conditions array are in OR relationship, and the items in the inner Conditions list are in AND relationship.

Used by actions: CreateRule, DescribeRules, ModifyRule.

Name	Type	Required	Description
Conditions	Array of RuleAndConditions	Yes	Judgment condition for executing the feature. Note: The feature can be executed if any condition in the array is met.
Actions	Array of Action	No	Executed feature. Note: Actions and SubRules cannot be both empty.
SubRules	Array of SubRuleItem	No	Nested rule. Note: SubRules and Actions cannot be both empty.

RuleAndConditions

List of rule engine conditions in AND relationship

Used by actions: CreateRule, DescribeRules, ModifyRule.

Name	Type	Required	Description
Conditions	Array of RuleCondition	Yes	Rule engine condition. This condition will be considered met if all items in the array are met.

RuleChoicePropertiesItem

Detailed settings of the rule engine that can be used for request match, which are optional parameter configuration items.

Used by actions: DescribeRulesSetting.

Name	Type	Description
Name	String	The parameter name.
Type	String	The parameter value type. CHOICE: The parameter value can be selected only from `Values`. TOGGLE: The parameter value is of switch type and can be selected from `ChoicesValue`. CUSTOM_NUM: The parameter value is a custom integer. CUSTOM_STRING: The parameter value is a custom string.
ChoicesValue	Array of String	Valid parameter values. Note: If `Type` is `CUSTOM_NUM` or `CUSTOM_STRING`, this parameter will be an empty array.
Min	Integer	Minimum value. If both `Min` and `Max` are set to `0`, this parameter does not take effect.
Max	Integer	Maximum value. If both `Min` and `Max` are set to `0`, this parameter does not take effect.
IsMultiple	Boolean	Whether multiple values can be selected or entered.
IsAllowEmpty	Boolean	Whether the parameter can be left empty.
ExtraParameter	RuleExtraParameter	Special parameter. NULL: Select `NormalAction` for `RuleAction`. If the member parameter `Id` is `Action`, select `RewirteAction` for `RuleAction`. If the member parameter `Id` is `StatusCode`, select `CodeAction` for `RuleAction`.

RuleCodeActionParams

Parameters of the action with the StatusCode field as the rule engine condition

Used by actions: CreateRule, DescribeRules, ModifyRule.

Name	Type	Required	Description
StatusCode	Integer	Yes	The status code.
Name	String	Yes	The parameter name. For details, see DescribeRulesSetting.
Values	Array of String	Yes	The parameter value.

RuleCondition

Rule engine condition parameters

Used by actions: CreateFunctionRule, CreateRule, DescribeRules, ModifyFunctionRule, ModifyRule.

Name	Type	Required	Description
Operator	String	Yes	Operator. Valid values: `equals`: Equals `notEquals`: Does not equal `exist`: Exists `notexist`: Does not exist
Target	String	Yes	Match type. Valid values: filename: File name; extension: File extension; host: Host name; full_url: The complete URL path under the current site, which must include the HTTP protocol, host, and path; url: Request for the URL path under the current site; client_country: Client country/region; query_string: The query string of the URL requested under the current site; request_header: HTTP request header; client_ip: Client IP address.
Values	Array of String	No	The parameter values for match types. It is allowed to pass an empty array only when the match type is query_string or request_header and the operator value is Exist or Does Not Exist. The corresponding match types include: File extension: Extensions like jpg, txt, etc.; File name: For example, foo in foo.jpg; All: All requests for domain names under the site; HOST: The host under the current site, for example, www.maxx55.com; URL Path: Request for the URL path under the current site, for example, /example; URL Full: The complete URL request under the current site, which must include the HTTP protocol, host, and path, for example, https://www.maxx55.cn/example; Client country/region: Country/region codes compliant with the ISO3166 standard; Query string: The parameter values in the query string of the URL requested under the current site, for example, cn and 1 in lang=cn&version=1; HTTP request header: The value of the HTTP request header field, for example, zh-CN,zh;q=0.9 in Accept-Language:zh-CN,zh;q=0.9; Client IP: The client IP address carried by the current request, supporting IPv4, IPv6, and an IP range.
IgnoreCase	Boolean	No	Whether the parameter value is case insensitive. Default value: false.
Name	String	No	The parameter name of the match type. This field is required only when `Target=query_string/request_header`. `query_string`: Name of the query string, such as "lang" and "version" in "lang=cn&version=1". `request_header`: Name of the HTTP request header, such as "Accept-Language" in the "Accept-Language:zh-CN,zh;q=0.9" header.

RuleExtraParameter

Rule engine parameter details and special parameter types.

Used by actions: DescribeRulesSetting.

Name	Type	Description
Id	String	Parameter name. Valid values: `Action`: Required parameter for HTTP header modification when `RewirteAction` is selected for `RuleAction`. `StatusCode`: Required parameter for the status code feature when `CodeAction` is selected for `RuleAction`.
Type	String	Parameter value type. `CHOICE`: The parameter value can be selected only from `Values`. `CUSTOM_NUM`: The parameter value is a custom integer. `CUSTOM_STRING`: The parameter value is a custom string.
Choices	Array of String	Valid values. Note: If the value of `Id` is `StatusCode`, values in the array are all integer values. When entering a parameter value, enter the integer value of the string.

RuleItem

Rule details of the rule engine

Used by actions: DescribeRules.

Name	Type	Description
RuleId	String	The rule ID.
RuleName	String	The rule name. It is a string that can contain 1–255 characters.
Status	String	Rule status. Values: `enable`: Enabled `disable`: Disabled
Rules	Array of Rule	The rule content.
RulePriority	Integer	The rule priority. The greater the value, the higher the priority. The minimum value is `1`.
Tags	Array of String	Tag of the rule.

RuleNormalActionParams

Common action parameter of a rule engine condition

Used by actions: CreateRule, DescribeRules, ModifyRule.

Name	Type	Required	Description
Name	String	Yes	The parameter name. For details, see DescribeRulesSetting.
Values	Array of String	Yes	The parameter value.

RuleRewriteActionParams

Parameter of the action for the HTTP request/response header of a rule engine condition.

Used by actions: CreateRule, DescribeRules, ModifyRule.

Name	Type	Required	Description
Action	String	Yes	Feature parameter name. For details, see DescribeRulesSetting. `add`: Add the HTTP header. `set`: Rewrite the HTTP header. `del`: Delete the HTTP header.
Name	String	Yes	Parameter name
Values	Array of String	Yes	Parameter value

RulesProperties

Detailed settings of the rule engine that can be used for request match.

Used by actions: DescribeRulesSetting.

Name	Type	Description
Name	String	Parameter name.
Min	Integer	Minimum value. If both `Min` and `Max` are set to `0`, this parameter does not take effect.
ChoicesValue	Array of String	Valid parameter values. Note: If `Type` is `CUSTOM_NUM` or `CUSTOM_STRING`, this parameter will be an empty array.
Type	String	The parameter value type. `CHOICE`: `If Type=CHOICE`, choose a value in `ChoiceValue`. `TOGGLE`: If `Type=TOGGLE`, choose `on` or `off` from `ChoicesValue`. `OBJECT`: Specify an object. If this is specified, `ChoiceProperties` includes attributes of the specified object. See Example 2. Create a rule with Type=OBJECT `CUSTOM_NUM`: (Integer) Custom value. `CUSTOM_STRING`: (String) Custom value.
Max	Integer	Maximum value. If both `Min` and `Max` are set to `0`, this parameter does not take effect.
IsMultiple	Boolean	Whether multiple values can be selected or entered.
IsAllowEmpty	Boolean	Whether the parameter can be left empty.
ChoiceProperties	Array of RuleChoicePropertiesItem	Associated configuration parameters of this parameter, which are required for API call. Note: This parameter will be an empty array if no special parameters are added as optional parameters.
ExtraParameter	RuleExtraParameter	NULL: No special parameters when `NormalAction` is selected for `RuleAction`. Note: This field may return null, indicating that no valid values can be obtained.

RulesSettingAction

List of the settings of the rule engine that can be used for request match and their detailed information.

Used by actions: DescribeRulesSetting.

Name	Type	Description
Action	String	Feature name. Valid values: Access URL rewrite (`AccessUrlRedirect`). Origin-pull URL rewrite (`UpstreamUrlRedirect`). Custom error page (`ErrorPage`). QUIC (`QUIC`). WebSocket (`WebSocket`). Video dragging (`VideoSeek`). Token authentication (`Authentication`). `CacheKey`: Custom cache key. `Cache`: Node cache TTL. `MaxAge`: Browser cache TTL. `OfflineCache`: Offline cache. `SmartRouting`: Smart acceleration. `RangeOriginPull`: Range GETs. `UpstreamHttp2`: HTTP/2 forwarding. `HostHeader`: Host header rewrite. `ForceRedirect`: Force HTTPS. `OriginPullProtocol`: Origin-pull HTTPS. `CachePrefresh`: Cache prefresh. `Compression`: Smart compression. `RequestHeader`: HTTP request header modification. HTTP response header modification (`ResponseHeader`). Status code cache TTL (`StatusCodeCache`). `Hsts`. `ClientIpHeader`. `TlsVersion`. `OcspStapling`.
Properties	Array of RulesProperties	Parameter information

S3

The configuration information of real-time log delivery to an AWS S3 compatible bucket

Used by actions: CreateRealtimeLogDeliveryTask, DescribeRealtimeLogDeliveryTasks, ModifyRealtimeLogDeliveryTask.

Name	Type	Required	Description
Endpoint	String	Yes	The URL without bucket name or path, for example: `https://storage.googleapis.com`, `https://s3.ap-northeast-2.amazonaws.com`, and `https://cos.ap-nanjing.myqcloud.com`.
Region	String	Yes	The region where the bucket is located, for example: `ap-northeast-2`.
Bucket	String	Yes	The bucket name and log storage directory, for example: `your_bucket_name/EO-logs/`. If the directory does not exist in the bucket, it will be created automatically.
AccessId	String	Yes	The Access Key ID used to access the bucket.
AccessKey	String	Yes	The secret key used to access the bucket.
CompressType	String	No	The data compress type. Valid values: gzip: gzip compression. If this field is not filled in, compression is disabled.

SecEntry

Returned value of security data entry

Used by actions: DescribeDDoSAttackData.

Name	Type	Description
Key	String	The query dimension value.
Value	Array of SecEntryValue	The details.

SecEntryValue

The security data queried by metric

Used by actions: DescribeDDoSAttackData.

Name	Type	Description
Metric	String	The metric name.
Detail	Array of TimingDataItem	The time-series data details.
Max	Integer	The maximum value.
Avg	Float	The average value.
Sum	Float	Sum

SecurityConfig

Security configuration

Used by actions: ModifySecurityPolicy.

Name	Type	Required	Description
WafConfig	WafConfig	No	Managed rule. If the parameter is null or not filled, the configuration last set will be used by default. Note: This field may return null, indicating that no valid value can be obtained.
RateLimitConfig	RateLimitConfig	No	Rate limiting. If the parameter is null or not filled, the configuration last set will be used by default. Note: This field may return null, indicating that no valid value can be obtained.
AclConfig	AclConfig	No	Custom rule. If the parameter is null or not filled, the configuration last set will be used by default. Note: This field may return null, indicating that no valid value can be obtained.
BotConfig	BotConfig	No	Bot configuration. If the parameter is null or not filled, the configuration last set will be used by default. Note: This field may return null, indicating that no valid value can be obtained.
SwitchConfig	SwitchConfig	No	Switch setting of the 7-layer protection. If the parameter is null or not filled, the configuration last set will be used by default.Note: This field may return null, indicating that no valid value can be obtained.
IpTableConfig	IpTableConfig	No	Basic access control. If the parameter is null or not filled, the configuration last set will be used by default. Note: This field may return null, indicating that no valid value can be obtained.
ExceptConfig	ExceptConfig	No	Exception rule configuration. If the parameter is null or not filled, the configuration last set will be used by default.Note: This field may return null, indicating that no valid value can be obtained.
DropPageConfig	DropPageConfig	No	Custom block page settings. If the parameter is null or not filled, the configuration last set will be used by default.Note: This field may return null, indicating that no valid value can be obtained.
TemplateConfig	TemplateConfig	No	Security template settings Note: This field may return `null`, indicating that no valid value can be obtained.
SlowPostConfig	SlowPostConfig	No	Settings for slow attack defense. If the parameter is null or not filled, the configuration last set will be used by default.Note: This field may return null, indicating that no valid value can be obtained.

SecurityTemplateBinding

Bindings of a security policy template

Used by actions: DescribeSecurityTemplateBindings.

Name	Type	Description
TemplateId	String	template ID
TemplateScope	Array of TemplateScope	Binding status of the template.

SecurityType

The security type setting item.

Used by actions: DescribeHostsSetting.

Name	Type	Required	Description
Switch	String	Yes	Whether to enable the security type setting. Values: `on`: Enable `off`: Disable

ServerCertInfo

HTTPS server certificate configuration

Used by actions: DescribeHostsSetting, ModifyHostsCertificate, ModifyZoneSetting.

Name	Type	Required	Description
CertId	String	Yes	Server certificate ID, which originates from the SSL side. You can check the CertId from the SSL Certificate List. Note: This field may return null, which indicates a failure to obtain a valid value.
Alias	String	No	Alias of the certificate. Note: This field may return null, indicating that no valid values can be obtained.
Type	String	No	Type of the certificate. Values: u200c `default`: Default certificate u200c `upload`: Custom certificate u200c `managed`: Tencent Cloud-managed certificate Note: This field may return·null, indicating that no valid values can be obtained.
ExpireTime	Timestamp ISO8601	No	Time when the certificate expires. Note: This field may return null, indicating that no valid values can be obtained.
DeployTime	Timestamp ISO8601	No	Time when the certificate is deployed. Note: This field may return null, indicating that no valid values can be obtained.
SignAlgo	String	No	Signature algorithm. Note: This field may return null, indicating that no valid values can be obtained.
CommonName	String	No	Domain name of the certificate. Note: This field may return `null`, indicating that no valid value can be obtained.

SkipCondition

Exception rule conditions, used to filter requests by specific fields

Used by actions: ModifySecurityPolicy.

Name	Type	Required	Description
Type	String	Yes	The field type. Values: `header_fields`: HTTP request header `cookie`: HTTP request cookie `query_string`: Query string in the HTTP request URL `uri`: HTTP request URI `body_raw`: HTTP request body `body_json`: JSON HTTP request body
Selector	String	Yes	The specific field. Values: `args`: Query parameter in the URI, such as "?name1=jack&age=12" `path`: Partial path in the URI, such as "/path/to/resource.jpg" `full`: Full path in the URI, such as "example.com/path/to/resource.jpg?name1=jack&age=12" `upload_filename`: File path segment `keys`: All keys `values`: Values of all keys `key_value`: Key and its value
MatchFromType	String	No	The match method used to match the key. Values: `equal`: Exact match `wildcard`: Wildcard match (only asterisks)
MatchFrom	Array of String	No	The value that matches the key. Note: This field may return `null`, indicating that no valid value can be obtained.
MatchContentType	String	No	The match method used to match the content. `equal`: Exact match `wildcard`: Wildcard match (only asterisks)
MatchContent	Array of String	No	The value that matches the content. Note: This field may return `null`, indicating that no valid value can be obtained.

SlowPostConfig

Slow attack defense configuration.

Used by actions: ModifySecurityPolicy.

Name	Type	Required	Description
Switch	String	Yes	Values: `on`: Enable `off`: Disable
FirstPartConfig	FirstPartConfig	No	Detect slow attacks by the transfer period of the first 8 KB of requests Note: This field may return `null`, indicating that no valid value can be obtained.
SlowRateConfig	SlowRateConfig	No	Detect slow attacks by the data rate of the main body (excluding the first 8 KB) of requests Note: This field may return `null`, indicating that no valid value can be obtained.
Action	String	No	The action to taken when a slow attack is detected. Values: `monitor`: Observe `drop`: Block the request Note: This field may return `null`, indicating that no valid value can be obtained.
RuleId	Integer	No	ID of the rule Note: This field may return `null`, indicating that no valid value can be obtained.

SlowRateConfig

The configuration to detect slow attacks

Used by actions: ModifySecurityPolicy.

Name	Type	Required	Description
Switch	String	Yes	Switch. Values: `on`: Enable `off`: Disable
Interval	Integer	No	The sampling interval in seconds. In this way, the first 8 KB of the request is ignored. The rest of data is separated in to multiple parts according to this interval for slow attack measurement. Note: This field may return `null`, indicating that no valid value can be obtained.
Threshold	Integer	No	The transfer rate threshold in bps. When the transfer rate of a sample is lower than the threshold, it’s considered a slow attack and handled according to the specified `Action`. Note: This field may return `null`, indicating that no valid value can be obtained.

SmartRouting

Smart acceleration configuration

Used by actions: DescribeHostsSetting, DescribeZoneSetting, ModifyZoneSetting.

Name	Type	Required	Description
Switch	String	Yes	Whether to enable smart acceleration. Values: `on`: Enable `off`: Disable

StandardDebug

Standard debugging

Used by actions: DescribeZoneSetting, ModifyZoneSetting.

Name	Type	Required	Description
Switch	String	Yes	Whether to enable standard debugging. Values: `on`: Enable `off`: Disable
AllowClientIPList	Array of String	Yes	The client IP to allow. It can be an IPv4/IPv6 address or a CIDR block. If not specified, it means to allow any client IP
ExpireTime	Timestamp ISO8601	Yes	The time when the standard debugging setting expires. If it is exceeded, this feature becomes invalid.

SubRule

Nested rule settings

Used by actions: CreateRule, DescribeRules, ModifyRule.

Name	Type	Required	Description
Conditions	Array of RuleAndConditions	Yes	The condition that determines if a feature should run. Note: If any condition in the array is met, the feature will run.
Actions	Array of Action	Yes	The feature to be executed.

SubRuleItem

Rule engine nested rule

Used by actions: CreateRule, DescribeRules, ModifyRule.

Name	Type	Required	Description
Rules	Array of SubRule	Yes	Nested rule settings
Tags	Array of String	No	Tag of the rule.

Sv

Pricing query parameter

Used by actions: DescribeZones.

Name	Type	Required	Description
Key	String	Yes	The parameter key.
Value	String	Yes	The parameter value.
Pack	String	No	Quota for a resource. Values: `zone`: Quota for sites `custom-rule`: Quota for custom rules `rate-limiting-rule`: Quota for rate limiting rules `l4-proxy-instance`: Quota for L4 proxy instances Note: This field may return null, indicating that no valid values can be obtained.
InstanceId	String	No	ID of the L4 proxy instance. Note: This field may return null, indicating that no valid values can be obtained.
ProtectionSpecs	String	No	The protection specification. Values: `cm_30G`: 30 Gbps base protection bandwidth in Chinese mainland service area `cm_60G`: 60 Gbps base protection bandwidth in Chinese mainland service area `cm_100G`: 100 Gbps base protection bandwidth in Chinese mainland service area `anycast_300G`: 300 Gbps Anycast-based protection in Global (MLC) service area `anycast_unlimited`: Unlimited Anycast-based protection bandwidth in Global (MLC) service area `cm_30G_anycast_300G`: 30 Gbps base protection bandwidth in Chinese mainland service area and 300 Gbps Anycast-based protection bandwidth in Global (MLC) service area `cm_30G_anycast_unlimited`: 30 Gbps base protection bandwidth in Chinese mainland service area and unlimited Anycast-based protection bandwidth in Global (MLC) service area cm_60G_anycast_300G`: 60 Gbps base protection bandwidth in Chinese mainland service area and 300 Gbps Anycast-based protection bandwidth in Global (MLC) service area</li><li> cm_60G_anycast_unlimited`: 60 Gbps base protection bandwidth in Chinese mainland service area and unlimited Anycast-based protection bandwidth in Global (MLC) service area `cm_100G_anycast_300G`: 100 Gbps base protection bandwidth in Chinese mainland service area and 300 Gbps Anycast-based protection bandwidth in Global (MLC) service area cm_100G_anycast_unlimited`: 100 Gbps base protection bandwidth in Chinese mainland service area and unlimited Anycast-based protection bandwidth in Global (MLC) service area Note: This field may return null, indicating that no valid values can be obtained.

SwitchConfig

Web security configuration switch

Used by actions: ModifySecurityPolicy.

Name	Type	Required	Description
WebSwitch	String	Yes	Whether to enable web protection. Values: `on`: Enable `off`: Disable It does not affect DDoS and bot configuration.

Tag

Tag configuration

Used by actions: CreateZone, DescribeZones.

Name	Type	Required	Description
TagKey	String	Yes	The tag key. Note: This field may return null, indicating that no valid values can be obtained.
TagValue	String	Yes	The tag value. Note: This field may return null, indicating that no valid values can be obtained.

Task

Content management task result

Used by actions: DescribePrefetchTasks, DescribePurgeTasks.

Name	Type	Description
JobId	String	ID of the task.
Target	String	Resource.
Type	String	Type of the task.
Method	String	Node cache purge method, with values: invalidate: Marks as expired. A back-to-origin validation is triggered upon user request, sending an HTTP conditional request with If-None-Match and If-Modified-Since headers. If the origin server responds with 200, the node will fetch new resources from the origin and update the cache; if the origin server responds with 304, the cache will not be updated; delete: Directly deletes the node's cache, triggering a resource fetch from the origin upon user request. Note: This field may return null, which indicates a failure to obtain a valid value.
Status	String	Status. Valid values: processing: Processing; success: Succeeded; failed: Failed; timeout: Timed out.
CreateTime	Timestamp ISO8601	Creation time of the task.
UpdateTime	Timestamp ISO8601	Completion time of the task.

TemplateConfig

Security template settings

Used by actions: ModifySecurityPolicy.

Name	Type	Required	Description
TemplateId	String	Yes	The template ID.
TemplateName	String	Yes	The template name.

TemplateScope

Domain names bound with the template.

Used by actions: DescribeSecurityTemplateBindings.

Name	Type	Required	Description
ZoneId	String	No	ID of the site. Note: This field may return·null, indicating that no valid values can be obtained.
EntityStatus	Array of EntityStatus	No	List of instance statuses Note: This field may return·null, indicating that no valid values can be obtained.

TimingDataItem

Data items of the statistical curve

Used by actions: DescribeDDoSAttackData, DescribeOverviewL7Data, DescribeTimingL4Data, DescribeTimingL7AnalysisData, DescribeTimingL7CacheData.

Name	Type	Description
Timestamp	Integer	Time point for returning data, in the format of Unix timestamp in seconds.
Value	Integer	The value.

TimingDataRecord

The time-series data

Used by actions: DescribeOverviewL7Data, DescribeTimingL4Data, DescribeTimingL7AnalysisData, DescribeTimingL7CacheData.

Name	Type	Description
TypeKey	String	The query dimension value.
TypeValue	Array of TimingTypeValue	Detailed time series data

TimingTypeValue

Detailed data of time series type

Used by actions: DescribeOverviewL7Data, DescribeTimingL4Data, DescribeTimingL7AnalysisData, DescribeTimingL7CacheData.

Name	Type	Description
Sum	Integer	Sum.
Max	Integer	The maximum value.
Avg	Integer	The average value.
MetricName	String	Metric name.
Detail	Array of TimingDataItem	Details. Note: This field may return null, indicating that no valid values can be obtained.

TopDataRecord

The top-ranked data record

Used by actions: DescribeTopL7AnalysisData, DescribeTopL7CacheData.

Name	Type	Description
TypeKey	String	The query dimension value.
DetailData	Array of TopDetailData	Top data rankings

TopDetailData

The top-ranked data details

Used by actions: DescribeTopL7AnalysisData, DescribeTopL7CacheData.

Name	Type	Description
Key	String	The field name.
Value	Integer	The field value.

TopEntry

The Top-ranked data

Used by actions: DescribeDDoSAttackTopData.

Name	Type	Description
Key	String	The query dimension value.
Value	Array of TopEntryValue	The details.

TopEntryValue

The top-ranked data

Used by actions: DescribeDDoSAttackTopData.

Name	Type	Description
Name	String	The item name.
Count	Integer	The number of items.

UpstreamHttp2

HTTP2 origin-pull configuration

Used by actions: DescribeZoneSetting, ModifyZoneSetting.

Name	Type	Required	Description
Switch	String	Yes	Whether to enable HTTP2 origin-pull. Valid values: `on`: Enable; `off`: Disable.

VanityNameServers

Custom name servers

Used by actions: DescribeZones, ModifyZone.

Name	Type	Required	Description
Switch	String	Yes	Whether to enable custom name servers. Values: `on`: Enable `off`: Disable
Servers	Array of String	No	List of custom name servers

VanityNameServersIps

IP information of the custom name server

Used by actions: DescribeZones.

Name	Type	Description
Name	String	Custom name of the name server
IPv4	String	IPv4 address of the custom name server

Waf

N/A

Used by actions: DescribeHostsSetting.

Name	Type	Required	Description
Switch	String	Yes	Whether to enable WAF. Values: `on`: Enable `off`: Disable
PolicyId	Integer	No	ID of the policy

WafConfig

WAF configuration.

Used by actions: ModifySecurityPolicy.

Name	Type	Required	Description
Switch	String	Yes	Whether to enable WAF configuration. Values: `on`: Enable `off`: Disable The configuration can be modified even when it is disabled.
Level	String	Yes	The protection level. Values: `loose`: Loose `normal`: Moderate `strict`: Strict `stricter`: Super strict `custom`: Custom
Mode	String	Yes	The WAF global mode. Values: `block`: Block globally `observe`: Observe globally
WafRule	WafRule	No	The settings of the managed rule. If it is null, the settings that were last configured will be used.
AiRule	AiRule	No	The setting of the AI rule engine. If it is null, the setting that was last configured will be used.

WafRule

WAF rule

Used by actions: ModifySecurityPolicy.

Name	Type	Required	Description
Switch	String	Yes	Whether to enable managed rules. Values: `on`: Enable `off`: Disable
BlockRuleIDs	Array of Integer	Yes	IDs of the rules to be disabled.
ObserveRuleIDs	Array of Integer	Yes	IDs of the rules to be executed in Observe mode.

WebSocket

WebSocket configuration

Used by actions: DescribeZoneSetting, ModifyZoneSetting.

Name	Type	Required	Description
Switch	String	Yes	Whether to enable WebSocket connection timeout. Values: `on`: The field "Timeout" can be configured. `off`: The field "Timeout" is fixed to 15 seconds.
Timeout	Integer	No	The timeout period in seconds. Maximum value: 120.

Zone

Site information

Used by actions: DescribeZones.

Name	Type	Description
ZoneId	String	Site ID.
ZoneName	String	The site name.
OriginalNameServers	Array of String	List of name servers used by the site
NameServers	Array of String	The list of name servers assigned by Tencent Cloud.
Status	String	The site status. Values: u200c `active`: The name server is switched to EdgeOne. u200c `pending`: The name server is not switched. u200c `moved`: The name server is changed to other service providers. u200c `deactivated`: The site is blocked. `initializing`: The site is not bound with any plan.
Type	String	Site access method. Valid values: full: NS access; partial: CNAME access; noDomainAccess: access with no domain name.
Paused	Boolean	Whether the site is disabled.
CnameSpeedUp	String	Whether CNAME acceleration is enabled. Values: `enabled`: Enabled `disabled`: Disabled
CnameStatus	String	CNAME record access status. Values: `finished`: The site is verified. `pending`: The site is being verified.
Tags	Array of Tag	The list of resource tags.
Resources	Array of Resource	The list of billable resources.
CreatedOn	Timestamp ISO8601	The creation time of the site.
ModifiedOn	Timestamp ISO8601	The modification date of the site.
Area	String	The site access region. Values: `global`: Global. `mainland`: Chinese mainland. `overseas`: Outside the Chinese mainland.
VanityNameServers	VanityNameServers	The custom name server information. Note: This field may return null, indicating that no valid values can be obtained.
VanityNameServersIps	Array of VanityNameServersIps	The custom name server IP information. Note: This field may return null, indicating that no valid values can be obtained.
ActiveStatus	String	Status of the proxy. Values: `active`: Enabled `inactive`: Not activated `paused`: Disabled
AliasZoneName	String	The site alias. It can be up to 20 characters consisting of digits, letters, hyphens (-) and underscores (_). Note: This field may return null, indicating that no valid values can be obtained.
IsFake	Integer	Whether it’s a fake site. Valid values: `0`: Non-fake site; `1`: Fake site.
LockStatus	String	Lock status. Values: `enable`: Normal. Modification is allowed. `disable`: Locked. Modification is not allowed. `plan_migrate`: Adjusting the plan. Modification is not allowed.
OwnershipVerification	OwnershipVerification	Ownership verification information Note: This field may return·null, indicating that no valid values can be obtained.

ZoneSetting

The site configuration.

Used by actions: DescribeZoneSetting.

Name	Type	Description
ZoneName	String	Name of the site
Area	String	Site acceleration region. Values: `mainland`: Acceleration in the Chinese mainland. `overseas`: Acceleration outside the Chinese mainland.
CacheKey	CacheKey	Node cache key configuration Note: This field may return null, indicating that no valid values can be obtained.
Quic	Quic	The QUIC access configuration. Note: This field may return null, indicating that no valid values can be obtained.
PostMaxSize	PostMaxSize	The POST transport configuration. Note: This field may return null, indicating that no valid values can be obtained.
Compression	Compression	Smart compression configuration. Note: This field may return null, indicating that no valid values can be obtained.
UpstreamHttp2	UpstreamHttp2	HTTP2 origin-pull configuration Note: This field may return null, indicating that no valid values can be obtained.
ForceRedirect	ForceRedirect	Force HTTPS redirect configuration Note: This field may return null, indicating that no valid values can be obtained.
CacheConfig	CacheConfig	Cache expiration time configuration Note: This field may return null, indicating that no valid values can be obtained.
Origin	Origin	Origin server configuration. Note: This field may return null, indicating that no valid values can be obtained.
SmartRouting	SmartRouting	Smart acceleration configuration Note: This field may return null, indicating that no valid values can be obtained.
MaxAge	MaxAge	Browser cache configuration Note: This field may return null, indicating that no valid values can be obtained.
OfflineCache	OfflineCache	The offline cache configuration. Note: This field may return null, indicating that no valid values can be obtained.
WebSocket	WebSocket	WebSocket configuration. Note: This field may return null, indicating that no valid values can be obtained.
ClientIpHeader	ClientIpHeader	Origin-pull client IP header configuration Note: This field may return null, indicating that no valid values can be obtained.
CachePrefresh	CachePrefresh	Cache prefresh configuration Note: This field may return null, indicating that no valid values can be obtained.
Ipv6	Ipv6	IPv6 access configuration Note: This field may return null, indicating that no valid values can be obtained.
Https	Https	HTTPS acceleration configuration Note: This field may return null, indicating that no valid values can be obtained.
ClientIpCountry	ClientIpCountry	Whether to carry the location information of the client IP during origin-pull. Note: This field may return `null`, indicating that no valid value can be obtained.
Grpc	Grpc	Configuration of gRPC support Note: This field may return `null`, indicating that no valid value can be obtained.
ImageOptimize	ImageOptimize	Image optimization configuration. Note: This field may return `null`, indicating that no valid value was found.
AccelerateMainland	AccelerateMainland	Cross-MLC-border acceleration. Note: This field may return `null`, indicating that no valid values can be obtained.
StandardDebug	StandardDebug	Standard debugging configuration. Note: This field may return null, indicating that no valid values can be obtained.
JITVideoProcess	JITVideoProcess	Just-in-time media processing configuration. Note: This field may return null, which indicates a failure to obtain a valid value.

联系我们

联系我们，为您的业务提供专属服务。

技术支持

如果你想寻求进一步的帮助，通过工单与我们进行联络。我们提供7x24的工单服务。

7x24 电话支持

tencent cloud

注册

登录

Recent Pages

Data Types

AccelerateMainland

AccelerateType

AccelerationDomain

AccelerationDomainCertificate

AclCondition

AclConfig

AclUserRule

Action

AdvancedFilter

AiRule

AlgDetectJS

AlgDetectResult

AlgDetectRule

AlgDetectSession

AliasDomain

ApplicationProxy

ApplicationProxyRule

AscriptionInfo

BillingData

BillingDataFilter

BindSharedCNAMEMap

BotConfig

BotExtendAction

BotManagedRule

BotPortraitRule

BotUserRule

CC

CLSTopic

Cache

CacheConfig

CacheKey

CachePrefresh

CacheTag

CertificateInfo

CheckRegionHealthStatus

ClientIpCountry

ClientIpHeader

CnameStatus

CodeAction

Compression

ConfigGroupVersionInfo

CustomEndpoint

CustomErrorPage

CustomField

CustomizedHeader

DDoS

DDoSAttackEvent

DDoSBlockData

DDosProtectionConfig

DefaultServerCertInfo

DeliveryCondition

DeployRecord

DetailHost

DiffIPWhitelist

DnsVerification

DropPageConfig

DropPageDetail

EntityStatus

EnvInfo

ErrorPageReference

ExceptConfig

ExceptUserRule

ExceptUserRuleCondition

ExceptUserRuleScope

FailReason

FileAscriptionInfo

FileVerification

Filter

FirstPartConfig

FollowOrigin

ForceRedirect

Function

FunctionEnvironmentVariable

FunctionRule

FunctionRuleCondition