Domain name for API request: teo.intl.tencentcloudapi.com.
This API is used to create an acceleration domain name.
For sites connected via the CNAME, if you have not verified the ownership of the domain name, the ownership verification information of the domain name is returned. To verify your ownership of the domain name, see Ownership Verification.
A maximum of 20 requests can be initiated per second for this API.
The following request parameter list only provides API request parameters and some common parameters. For the complete common parameter list, see Common Request Parameters.
Parameter Name | Required | Type | Description |
---|---|---|---|
Action | Yes | String | Common Params. The value used for this API: CreateAccelerationDomain. |
Version | Yes | String | Common Params. The value used for this API: 2022-09-01. |
Region | No | String | Common Params. This parameter is not required. |
ZoneId | Yes | String | ID of the site related with the acceleration domain name. |
DomainName | Yes | String | Acceleration domain name |
OriginInfo | Yes | OriginInfo | Details of the origin. |
OriginProtocol | No | String | Origin-pull protocol configuration. Values:FOLLOW : Follow the protocol of originHTTP : Send requests to the origin over HTTPHTTPS : Send requests to the origin over HTTPSFOLLOW |
HttpOriginPort | No | Integer | Ports for HTTP origin-pull requests. Range: 1-65535. It takes effect when OriginProtocol=FOLLOW/HTTP . Port 80 is used if it's not specified. |
HttpsOriginPort | No | Integer | Ports for HTTPS origin-pull requests. Range: 1-65535. It takes effect when OriginProtocol=FOLLOW/HTTPS . Port 443 is used if it's not specified. |
IPv6Status | No | String | IPv6 status. Values:follow : Follow the IPv6 configuration of the siteon : Enableoff : Disablefollow |
Parameter Name | Type | Description |
---|---|---|
OwnershipVerification | OwnershipVerification | Use the information returned by this parameter to verify the ownership of a domain name. For details, see Ownership Verification. Note: This field may return·null, indicating that no valid values can be obtained. |
RequestId | String | The unique request ID, generated by the server, will be returned for every request (if the request fails to reach the server for other reasons, the request will not obtain a RequestId). RequestId is required for locating a problem. |
This example shows you how to create an acceleration domain name for a domain-name origin server.
POST / HTTP/1.1
Host: teo.intl.tencentcloudapi.com
Content-Type: application/json
X-TC-Action: CreateAccelerationDomain
<Common request parameters>
{
"ZoneId": "zone-225qgrnvbi9w",
"DomainName": "qq.com",
"OriginInfo": {
"OriginType": "ip_domain",
"Origin": "www.test.com"
}
}
{
"Response": {
"RequestId": "5e0a2b4e-df6d-4d2a-ac39-1706cbf8a707"
}
}
This example shows you how to create an acceleration domain name for an AWS S3 origin server, with private network access enabled and authentication algorithm set to AWS Signature Version 2.
POST / HTTP/1.1
Host: teo.intl.tencentcloudapi.com
Content-Type: application/json
X-TC-Action: CreateAccelerationDomain
<Common request parameters>
{
"ZoneId": "zone-225qgrnvbi9w",
"DomainName": "qq.com",
"OriginInfo": {
"OriginType": "AWS_S3",
"Origin": "test.s3.ap-east-1.amazonaws.com",
"PrivateAccess": "on",
"PrivateParameters": [
{
"Name": "AccessKeyId",
"Value": "AKID***********************************************"
},
{
"Name": "SecretAccessKey",
"Value": "nMirpdWhhT6bxPsaFwYM1SzQrTest"
},
{
"Name": "SignatureVersion",
"Value": "v2"
},
{
"Name": "Region",
"Value": "ap-east-1"
}
]
}
}
{
"Response": {
"RequestId": "5e0a2b4e-df6d-4d2a-ac39-1706cbf8a703"
}
}
TencentCloud API 3.0 integrates SDKs that support various programming languages to make it easier for you to call APIs.
The following only lists the error codes related to the API business logic. For other error codes, see Common Error Codes.
Error Code | Description |
---|---|
FailedOperation | Operation failed. |
InternalError.ConfigLocked | The configuration is locked. Please unlock and try again. |
InvalidParameter.ConflictHostOrigin | The origin cannot be the same as the domain name. |
InvalidParameter.ErrInvalidActionParam | Invalid operation: Invalid parameter. |
InvalidParameter.InvalidAccelerateType | Parameter error. |
InvalidParameter.InvalidAwsPrivateAccess | Invalid third-party object storage. |
InvalidParameter.InvalidAwsRegion | Invalid region. Please fill in a correct region of the third-party object storage service. |
InvalidParameter.InvalidClientIpOrigin | Invalid origin for region-specific origin-pull. |
InvalidParameter.InvalidIpv6Switch | Invalid IPv6 settings. |
InvalidParameter.InvalidOrigin | Invalid origin server. |
InvalidParameter.InvalidOriginIp | The origin cannot be a private IP or loopback address. |
InvalidParameter.InvalidPrivateAccessParams | AccessKeyId and SecretAccessKey are required to access the third-party object storage. |
InvalidParameter.InvalidPrivateAccessSwitch | The value of PrivateAccess should be on or off . |
InvalidParameter.InvalidQuicBilling | The plan does not support QUIC. |
InvalidParameter.InvalidServerName | Invalid origin domain. |
InvalidParameter.InvalidStandardDebugClientIp | Invalid client IP or CIDR block. |
InvalidParameter.InvalidWebSocketTimeout | Invalid WebSocket. |
InvalidParameter.PostMaxSizeLimitExceeded | Maximum upload size exceeded. |
InvalidParameter.SpaceNotBindOrigin | Shield Space is not bound with an origin. |
InvalidParameter.ZoneIsGrayPublishing | The site is being upgraded. Changing is not supported. Please try again later. |
InvalidParameterValue.ConflictRecord | It conflicts with existing records. |
InvalidParameterValue.ConflictWithDNSSEC | DNS records conflict with DNSSEC. |
InvalidParameterValue.ConflictWithDomain | The DNS record conflicts with acceleration domain name record. |
InvalidParameterValue.ConflictWithNSRecord | This DNS record conflicts with NS records. |
InvalidParameterValue.ContentSameAsName | The host record cannot be the same as the record value. |
InvalidParameterValue.DomainNotMatchZone | The specified domain name does not match the site. |
InvalidParameterValue.InvalidDNSContent | Incorrect DNS record. |
InvalidParameterValue.InvalidDNSName | Incorrect DNS record name. |
InvalidParameterValue.InvalidDomainName | Invalid accelerated domain name. It can contain [0-9], [A-Z], [a-z] and [-]. It cannot start or end with "-". |
InvalidParameterValue.InvalidProxyOrigin | Incorrect DNS proxy |
InvalidParameterValue.OriginGroupNotExists | The specified origin group does not exist. |
OperationDenied | Operation denied. |
OperationDenied.AccelerateMainlandDisable | Cross-MLC-border acceleration is in beta. To join the beta, submit a ticket. |
OperationDenied.ConfigLocked | The configuration is locked. Please unlock and try again. |
OperationDenied.DisableZoneNotCompleted | The EdgeOne service of the site is being disabled. Please try again later. |
OperationDenied.DomainNoICP | The domain name doesn't have an ICP filing number. |
OperationDenied.ErrZoneIsAlreadyPaused | The EdgeOne service of the site is disabled. Please enable it and try again. |
OperationDenied.InvalidAdvancedDefenseZoneArea | The acceleration regions of the site must be in the Chinese mainland when you enable the DDoS Protection. |
OperationDenied.LoadBalanceStatusNotInOnline | The affiliated Cloud Load Balancer is not in a running state. Operation is forbidden. |
OperationDenied.RecordIsForbidden | The DNS record cannot be added. |
OperationDenied.ResourceLockedTemporary | This operation conflicts with concurrent operations. Try again later. |
OperationDenied.VersionControlIsGraying | There is a test version in use. Please release the test version to the live environment, or roll back the test version and try again. |
ResourceInUse | The resource is occupied. |
ResourceInUse.DnsRecord | The domain name is being resolved. If you need to enable acceleration, please go to DNS Records. |
ResourceNotFound | The resource doesn’t exist. |
ResourceUnavailable.DomainAlreadyExists | The domain name is already connected to EdgeOne by another account. Please retrieve it first in order to add it. |
ResourcesSoldOut.L7LackOfResources | |
UnauthorizedOperation.CamUnauthorized | CAM is not authorized. |
UnauthorizedOperation.NoPermission | The sub-account is not authorized for the operation. Please get permissions first. |
UnauthorizedOperation.Unknown | An unknown error occurred in the backend server. |
本页内容是否解决了您的问题?