tencent cloud

文档反馈

ModifyMalwareTimingScanSettings

最后更新时间:2024-08-27 11:37:27

1. API Description

Domain name for API request: cwp.tencentcloudapi.com.

This API is used to set scheduled scan.

A maximum of 20 requests can be initiated per second for this API.

We recommend you to use API Explorer
Try it
API Explorer provides a range of capabilities, including online call, signature authentication, SDK code generation, and API quick search. It enables you to view the request, response, and auto-generated examples.

2. Input Parameters

The following request parameter list only provides API request parameters and some common parameters. For the complete common parameter list, see Common Request Parameters.

Parameter Name Required Type Description
Action Yes String Common Params. The value used for this API: ModifyMalwareTimingScanSettings.
Version Yes String Common Params. The value used for this API: 2018-02-28.
Region No String Common Params. This parameter is not required.
CheckPattern Yes Integer Detection mode. 0: full disk detection; 1: rapid detection
StartTime Yes String Detection interval start time, such as 02:00:00
EndTime Yes String Detection interval timeout end time, such as 04:00:00
IsGlobal Yes Integer Whether all servers. 1: all; 2: specified
EnableScan Yes Integer Regular detection switch. 0: off; 1: on
MonitoringPattern Yes Integer Monitoring mode. 0: standard; 1: deep
Cycle Yes Integer Scan interval: defaults to 1 per day
RealTimeMonitoring Yes Integer Real-time monitoring. 0: off; 1: on
QuuidList.N No Array of String Required for specified servers, a string array of host QUUIDs
AutoIsolation No Integer Whether to apply automatic isolation. 1: yes; 0: no
KillProcess No Integer Whether to terminate the process. 1: terminate; 0: not terminate
DoClean No Integer 1: clean up; 0: not clean up
  • This operation will fix tampered system commands, scheduled tasks, and other system files. Please ensure that yum/apt is available during the operation.
  • EngineType No Integer 1: standard mode (only critical and high-risk are reported.); 2: enhanced mode (critical, high-risk, and medium-risk are reported.); 3: strict mode (critical, high-risk, medium-risk, low-risk, and prompt are reported.)
    EnableInspiredEngine No Integer Heuristic Engine Switch: 0 OFF, 1 ON.
    EnableMemShellScan No Integer Whether to enable malicious process killing [0: Not Enabled; 1: Enabled]
    ProtectMode No Integer Protection mode: 0: standard; 1: important period guarantee
    ProtectFileScope No Integer Scope of detection: 0: malicious files other than scripts; 1: all malicious files

    3. Output Parameters

    Parameter Name Type Description
    RequestId String The unique request ID, generated by the server, will be returned for every request (if the request fails to reach the server for other reasons, the request will not obtain a RequestId). RequestId is required for locating a problem.

    4. Example

    Example1 Timing Scan Settings

    Input Example

    POST / HTTP/1.1
    Host: cwp.tencentcloudapi.com
    Content-Type: application/json
    X-TC-Action: ModifyMalwareTimingScanSettings
    <Common request parameters>
    
    {
        "EnableScan": "1",
        "CheckPattern": "0",
        "IsGlobal": "1",
        "MonitoringPattern": "0",
        "StartTime": "02:00:00",
        "RealTimeMonitoring": "1",
        "EndTime": "04:00:00",
        "Cycle": "1"
    }
    

    Output Example

    {
        "Response": {
            "RequestId": "007863e7-fce9-49c2-9561-16bc2a522620"
        }
    }
    

    5. Developer Resources

    SDK

    TencentCloud API 3.0 integrates SDKs that support various programming languages to make it easier for you to call APIs.

    Command Line Interface

    6. Error Code

    The following only lists the error codes related to the API business logic. For other error codes, see Common Error Codes.

    Error Code Description
    FailedOperation Operation failed.
    FailedOperation.APIServerFail Failed to invoke the API service.
    InternalError Internal error
    InvalidParameter Incorrect parameter.
    InvalidParameter.DateRange Incorrect time range format.
    InvalidParameter.IllegalRequest Invalid request.
    InvalidParameter.InvalidFormat Incorrect parameter format.
    InvalidParameter.MissingParameter Missing parameter.
    InvalidParameter.ParsingError Incorrect parameter parsing.
    InvalidParameterValue Invalid parameter value.
    MissingParameter Missing parameter error.
    ResourceNotFound The resource does not exist.