tencent cloud

PrevNext

masukan

cari berdasarkan kata kunci

Recent Pages

Dokumentasi
Cloud Object Storage
    Dokumentasi
    Download PDF

    COSCMD

    Terakhir diperbarui:2024-06-28 16:58:28
    Unduh PDF

      Feature Overview

      COSCMD enables you to use simple command lines to batch-operate objects, such as upload, download, and delete.

      Operating Environments

      Operating system

      Windows, Linux, and macOS.
      Note:
      Local characters should use UTF-8 encoding. Otherwise, exceptions will occur when you operate on Chinese files.
      Ensure that the local time is in sync with UTC. If there is a large deviation between the two, COSCMD might not function properly.

      Software dependency

      Python 2.7 and Python 3
      Latest version of pip
      Note:
      It is recommended that users install the Python version with integrated pip directly.

      Installation and configuration

      For more information about the installation and configuration of the environment, see Python.
      For more information about the installation and configuration of pip, see Installation.

      Download and Installation

      You can install COSCMD in the following three ways:

      Method 1:

      1. Installing with pip

      Run the pip command to install COSCMD:
      pip install coscmd
      After the installation is complete, you can run the -v or --version command to view the version information.
      Note:
      After installing COSCMD in Windows, you need to add the C:\\python_install_dir and C:\\python_install_dir\\Scripts paths to environment variables.

      2. Upgrading with pip

      After the installation is complete, you can run the following command to upgrade COSCMD:
      pip install coscmd -U

      Method 2: Installing with the source code (not recommended)

      You can click here to download the source code.
      git clone https://github.com/tencentyun/coscmd.git
      cd coscmd
      python setup.py install
      Note:
      If your Python version is 2.6, installing the dependent libraries with pip may fail. Therefore, this installation method is recommended.

      Method 3: Installing from offline

      Note:
      Ensure that the two devices are installed with the same version of Python. Otherwise, the installation might fail.
      # Run the following commands on a device that is connected to the Internet
      mkdir coscmd-packages
      pip download coscmd -d coscmd-packages
      tar -czvf coscmd-packages.tar.gz coscmd-packages
      
      
      
      # Copy the installation package to a device that is not connected to the Internet and run the following commands
      tar -xzvf coscmd-packages.tar.gz
      pip install coscmd --no-index -f coscmd-packages

      Parameter Configuration

      Viewing the help option

      Run the -h or --help command to view the information and usage of COSCMD.
      coscmd -h
      The help information is as follows:
      usage: coscmd [-h] [-d] [-s] [-b BUCKET] [-r REGION] [-c CONFIG_PATH]
                    [-l LOG_PATH] [--log_size LOG_SIZE]
                    [--log_backup_count LOG_BACKUP_COUNT] [-v]
                    {config,upload,download,delete,abort,copy,move,list,listparts,info,restore,signurl,createbucket,deletebucket,putobjectacl,getobjectacl,putbucketacl,getbucketacl,putbucketversioning,getbucketversioning,probe}
                    ...
      
      an easy-to-use but powerful command-line tool. try 'coscmd -h' to get more
      informations. try 'coscmd sub-command -h' to learn all command usage, likes
      'coscmd upload -h'
      
      positional arguments:
        {config,upload,download,delete,abort,copy,move,list,listparts,info,restore,signurl,createbucket,deletebucket,putobjectacl,getobjectacl,putbucketacl,getbucketacl,putbucketversioning,getbucketversioning,probe}
          config              Config your information at first
          upload              Upload file or directory to COS
          download            Download file from COS to local
          delete              Delete file or files on COS
          abort               Aborts upload parts on COS
          copy                Copy file from COS to COS
          move                move file from COS to COS
          list                List files on COS
          listparts           List upload parts
          info                Get the information of file on COS
          restore             Restore
          signurl             Get download url
          createbucket        Create bucket
          deletebucket        Delete bucket
          putobjectacl        Set object acl
          getobjectacl        Get object acl
          putbucketacl        Set bucket acl
          getbucketacl        Get bucket acl
          putbucketversioning
                              Set the versioning state
          getbucketversioning
                              Get the versioning state
          probe               Connection test
      
      optional arguments:
        -h, --help            show this help message and exit
        -d, --debug           Debug mode
        -s, --silence         Silence mode
        -b BUCKET, --bucket BUCKET
                              Specify bucket
        -r REGION, --region REGION
                              Specify region
        -c CONFIG_PATH, --config_path CONFIG_PATH
                              Specify config_path
        -l LOG_PATH, --log_path LOG_PATH
                              Specify log_path
        --log_size LOG_SIZE   specify max log size in MB (default 1MB)
        --log_backup_count LOG_BACKUP_COUNT
                              specify log backup num
        -v, --version         show program's version number and exit
      In addition, you can enter -h after each command (with no parameter appended) to see how to use the command. For example:
      coscmd upload -h  // View how to use the upload command

      Generating a configuration file

      COSCMD will first read the necessary information from the configuration file before running. By default, COSCMD will read configuration items from ~/.cos.conf.
      Note:
      Before the configuration, you need to go to the COS console to create a bucket (e.g., configure-bucket-1250000000) for parameter configuration and create a key.
      The following is a sample configuration file:
      [common]
      secret_id = AKIDA6wUmImTMzvXZNbGLCgtusZ2E8mG****
      secret_key = TghWBCyf5LIyTcXCoBdw1oRpytWk****
      bucket = configure-bucket-1250000000
      region = ap-chengdu
      max_thread = 5
      part_size = 1
      retry = 5
      timeout = 60
      schema = https
      verify = md5
      anonymous = False
      Note:
      The timeout item in the configuration file, in seconds, indicates the timeout period for reading and writing data.
      schema can be set to http or https (default).
      anonymous can be set to True or False. If it is set to True, the anonymous mode is used (the signature is empty).
      For more information about the parameter description, run the coscmd config -h command.

      Generating a configuration file via the config command

      Note:
      We recommend you use a temporary key as instructed in Generating and Using Temporary Keys to call the SDK for security purposes. When you apply for a temporary key, follow the Notes on Principle of Least Privilege to avoid leaking resources besides your buckets and objects.
      If you must use a permanent key, we recommend you follow the Notes on Principle of Least Privilege to limit the scope of permission on the permanent key.
      You can run the config command to automatically generate a configuration file in ~/.cos.conf. The command format is as follows:
      coscmd config [OPTION]...<FILE>...
                    [-h] --help
                    [-a] <SECRET_ID>
                    [-s] <SECRET_KEY>
                    [-t] <TOKEN>
                    [-b] <BucketName-APPID>
                    [-r] <REGION> | [-e] <ENDPOINT>
                    [-m] <MAX_THREAD>
                    [-p] <PART_SIZE>
                    [--do-not-use-ssl]
                    [--anonymous]
      Note:
      Fields enclosed in "[]" are optional, and those in "<>" are required.
      The parameters are described as follows:
      Option
      Parameter Description
      Valid Value
      Required
      -a
      Key ID, which can be obtained at Manage API Key
      String
      Yes
      -s
      Key, which can be obtained at Manage API Key
      String
      Yes
      -t
      Temporary key token, which needs to be specified in the x-cos-security-token header when a temporary key is used.
      String
      No
      -b
      Name of the specified bucket, formatted as BucketName-APPID. For more information, see Naming Conventions. If this is your first time using COSCMD, you need to create a bucket in the COS console to configure COSCMD.
      String
      Yes
      -r
      Region of the bucket. For more information, see Regions and Access Endpoints.
      String
      Yes
      -e
      Endpoint of the request. Once you configure this parameter, the region parameter will be invalidated. If you use the default endpoint, this parameter is formatted as cos.<region>.myqcloud.com; if you use a global acceleration endpoint, the format is cos.accelerate.myqcloud.com.
      String
      No
      -m
      Maximum number of threads for multithreaded operation (default is 5). If the file upload is slow, you can increase this value. The number of threads depends on the machine's performance. Assuming the machine supports a maximum of 30 threads, you can adjust the concurrent threads to 30 to fully utilize the machine performance. The command is coscmd config -m 30.
      Number
      No
      -p
      Size of the multipart upload part, in MB (default: 1; value range: 1-1000)
      Number
      No
      --do-not-use-ssl
      Uses the HTTP protocol instead of HTTPS
      String
      No
      --anonymous
      Anonymous operation (without carrying a signature)
      String
      No
      The following sample shows how to use the config command:
      coscmd config -a AChT4ThiXAbpBDEFGhT4ThiXAbp**** -s WE54wreefvds3462refgwewe**** -b configure-bucket-1250000000 -r ap-chengdu

      Common Commands

      Specifying a bucket and its region

      If you do not specify the bucket and region in the commands, the commands take effect for the bucket that is used to configure COSCMD. To perform operations on another bucket, you need to specify the bucket and the region where the bucket resides.
      Note:
      Use the -b <BucketName-APPID> parameter to specify the bucket name, which must be formatted as BucketName-APPID.
      Use the -r <region> parameter to specify the region where the bucket resides.
      Command syntax
      coscmd -b <BucketName-APPID> -r <region> <action> ...
      Sample: creating a bucket named examplebucket that resides in the Beijing region
      coscmd -b examplebucket-1250000000 -r ap-beijing createbucket
      Sample: uploading “picture.jpg” from D drive to the examplebucket bucket
      coscmd -b examplebucket-1250000000 -r ap-beijing upload D:/picture.jpg /

      Specifying the configuration file and log file paths

      If you do not specify the configuration file path, ~/.cos.conf will be used by default. Similarly, if you do not specify the log file path, ~/.cos.log will be used by default.
      Note:
      Use the -c <conf_path> parameter to specify the configuration file path. COSCMD will read configuration information from the path when running.
      Use the -l <log_conf> parameter to specify the log file path. COSCMD will output the logs generated at runtime to the log files in the path.
      Command syntax
      coscmd -c <conf_path> -l <log_conf> <action> ...
      Sample: setting the configuration file’s path to /data/home/cos_conf and the log path to /data/home/cos_log, and creating a bucket named examplebucket in the Beijing region.
      coscmd -c /data/home/cos_conf -l /data/home/cos_log -b examplebucket-1250000000 -r ap-beijing createbucket

      Running commands in debugging mode

      If -d or -debug is added before a command, detailed operation information will be displayed when executing the command, as shown in the example below:
      Command syntax
      coscmd -d upload <localpath> <cospath>
      Sample: outputting detailed information upon the upload
      coscmd -d upload -rs D:/folder/ /

      Running commands in silence mode

      You can prefix -s or --silence in each command so that no message will be output.
      Note:
      To run this command, the version should be at least 1.8.6.24.
      Command syntax
      coscmd -s upload <localpath> <cospath>
      Sample:
      coscmd -s upload D:/picture.jpg /

      Common Bucket Commands

      Creating a bucket

      Note:
      Specify -b <BucketName-APPID> and -r <Region> when you run the coscmd createbucket command; otherwise, an error may be reported. This is because if the bucket and region are not specified, this command takes effect for the bucket that is used to configure COSCMD.
      Command syntax
      coscmd -b <BucketName-APPID> createbucket
      Sample: creating a bucket named examplebucket that resides in the Beijing region
      coscmd -b examplebucket-1250000000 -r ap-beijing createbucket

      Deleting a bucket

      Note:
      coscmd deletebucket takes effect only for the bucket that is used to configure COSCMD. To delete another bucket, run the command with the -b <BucketName-APPID> and -r <region> parameters specified.
      Command syntax
      coscmd -b <BucketName-APPID> deletebucket
      Sample: deleting empty buckets
      coscmd -b examplebucket-1250000000 -r ap-beijing deletebucket
      Sample: forcibly deleting a non-empty bucket
      coscmd -b examplebucket-1250000000 -r ap-beijing deletebucket -f
      Note:
      The -f parameter will forcibly delete the bucket, including all files, noncurrent folders (if versioning is enabled), and incomplete multipart uploads.

      Common Object Commands

      Uploading files

      Command syntax for uploading a file
      coscmd upload <localpath> <cospath>
      Note:
      Replace "localpath" and "cospath" enclosed in "<>" with the path of the local file to upload and the COS storage path, respectively.
      Sample: uploading “picture.jpg” in D drive to the "doc" folder of COS
      coscmd upload D:/picture.jpg doc/
      Sample: uploading “picture.jpg” in the "doc" folder in D drive to the "doc" folder of COS
      coscmd upload D:/doc/picture.jpg doc/
      Sample: uploading a file to the ARCHIVE storage class to the "doc" directory of COS
      coscmd upload D:/picture.jpg doc/ -H "{'x-cos-storage-class':'Archive'}"
      Note:
      When you set the HTTP header with the -H parameter, please use the JSON format, for example, coscmd upload -H "{'x-cos-storage-class':'Archive','Content-Language':'zh-CN'}" <localpath> <cospath>. For more information about the headers, see PUT Object.
      Sample: setting meta attributes and uploading a file to the “doc” folder of COS
      coscmd upload D:/picture.jpg doc/ -H "{'x-cos-meta-example':'example'}"
      Sample: Set the upload speed limit to 800Kb/s and upload the file file.zip from the doc folder on Drive D to the doc directory on COS.
      coscmd upload D:/doc/file.zip doc/ -H "{'x-cos-traffic-limit':'819200'}"
      Note:
      Specify the request header x-cos-traffic-limit via the -H parameter to limit the speed. The speed range is 819200 to 838860800 (in bit/s), that is, 800 Kb/s to 800 Mb/s. If a value is not within this range, a 400 error will be returned.

      Uploading a folder

      Command syntax for uploading a folder
      coscmd upload -r <localpath> <cospath>
      Note:
      Windows users are advised to use the upload command in cmd or PowerShell that comes with the system. Other tools, such as Git Bash, have a different command path resolution strategy than PowerShell and can cause users' files to be uploaded to an incorrect path.
      Sample: uploading the "doc" folder in D drive to the root directory of COS
      coscmd upload -r D:/doc /
      Sample: uploading the "doc" folder in D drive to the "doc" folder of COS
      coscmd upload -r D:/doc doc
      Sample: uploading files synchronously (files with the same name, MD5 checksum, and file size will be skipped)
      coscmd upload -rs D:/doc doc
      Note:
      Use the -s parameter to upload files synchronously while skipping those with the same MD5 value (please note that the source files in COS must have been uploaded using COSCMD v1.8.3.2 or above; the x-cos-meta-md5 header is included by default).
      Sample: uploading files synchronously (files with the same name and file size will be skipped)
      coscmd upload -rs --skipmd5 D:/doc doc
      Note:
      The -s parameter allows synchronous upload, and the --skipmd5 parameter can be used to skip files with the same name and same file size.
      Sample: uploading the folder synchronously and deleting files that are deleted in the "doc" folder in D drive
      coscmd upload -rs --delete D:/doc /
      Note:
      For example, if the files in the Drive D doc folder have been synchronously uploaded to the doc path in COS on the same day, and the source and destination are consistent. On the next day, if the user deletes file A from the Drive D doc folder, executing the above command will delete file A from the doc path in COS, ultimately keeping the files in the Drive D doc folder consistent with those in the doc path in COS.
      Sample: ignoring .txt and .doc files in the "doc" folder in D drive
      coscmd upload -rs D:/doc / --ignore *.txt,*.doc
      Sample: ignoring .txt files in the "doc" folder in D drive
      coscmd upload -rs D:/doc / --ignore "*.txt"
      Note:
      When uploading folders, you can ignore certain types of files by using the --ignore parameter, or filter certain types of files by using --include. Multiple shell wildcard rules (separated by commas ,) are supported. To ignore a specified extension, , must be added at the end, or "" must be used to enclose the extension. If "" contains multiple comma-separated rules, the first rule prevails.
      If you want to use --ignore to filter all files in a particular folder, you need to use an absolute path and use "" to enclose the path, for example, coscmd upload -rs D:/doc / --ignore "D:/doc/ignore_folder/*".
      Sample: uploading .txt and .doc files in the "doc" folder in D drive
      coscmd upload -rs D:/doc / --include *.txt,*.doc
      Sample: uploading .txt files in the "doc" folder in D drive
      coscmd upload -rs D:/doc / --include "*.txt"
      Note:
      If the file to upload is larger than 10 MB, COSCMD will upload it with multipart upload. The command is coscmd upload <localpath> <cospath> (same as simple upload).
      COSCMD supports checkpoint restart to resume the upload of large files. When the multipart upload of a large file fails, only the failed parts will be uploaded when the operation is resumed instead of starting over from scratch (please ensure that the directory and content of the re-uploaded file are consistent with the uploaded directory).
      COSCMD performs MD5 verification on each part during multipart upload.
      When COSCMD uploads a file, the x-cos-meta-md5 header is carried by default, whose value is the file's MD5 checksum. If the command has carried the --skipmd5 parameter, this header will not be carried.

      Querying a file list

      The query command is as follows:
      Command syntax
      coscmd list <cospath>
      Sample: recursively querying the list of all files prefixed with "doc/" in this bucket
      coscmd list doc/
      Sample: recursively querying the file list, number of files, and the file sizes of a bucket.
      coscmd list -ar
      Sample: recursively querying the list of all files prefixed with "examplefolder"
      coscmd list examplefolder/ -ar
      Sample: querying the historical versions of all files in a bucket
      coscmd list -v
      Note:
      Replace "cospath" enclosed in "<>" with the COS path of the file list to query. If <cospath> is empty, the root directory of the current bucket is queried.
      Use -a to query all files.
      Use -r to query files recursively. The number and total size of the files are listed at the end of the returned result.
      Use -n num to set the maximum number of files to query.

      Viewing the file information

      The command is as follows:
      Command syntax
      coscmd info <cospath>
      Sample: viewing the metadata of "doc/picture.jpg"
      coscmd info doc/picture.jpg
      Note:
      Replace "cospath" enclosed in "<>" with the COS path of the file to display.

      Downloading a file or folder

      Command syntax for downloading a file

      coscmd download <cospath> <localpath>
      Note:
      Replace "cospath" and "localpath" enclosed in "<>" with the COS path of the file to download and the local storage path, respectively.
      Sample: downloading the "doc/picture.jpg" file in COS to "D:/picture.jpg"
      coscmd download doc/picture.jpg D:/picture.jpg
      Sample: downloading the "doc/picture.jpg" file in COS to drive D
      coscmd download doc/picture.jpg D:/
      Sample: downloading a specified version of "picture.jpg" to drive D
      coscmd download picture.jpg --versionId MTg0NDUxMzc2OTM4NTExNTg7Tjg D:/

      Command syntax for downloading a folder

      coscmd download -r <cospath> <localpath>
      Sample: downloading the "doc" folder to "D:/folder/doc"
      coscmd download -r doc D:/folder/
      Sample: downloading files in the root directory while ignoring those in the doc directory that is under the root directory
      coscmd download -r / D:/ --ignore "doc/*"
      Sample: downloading all files in the root directory of the current bucket and overwriting local files
      coscmd download -rf / D:/examplefolder/
      Note:
      If a file with the same name exists locally, the download will fail. In this case, you need to use the -f parameter to overwrite the local file.
      Sample: synchronously downloading all files in the root directory of the current bucket while skipping those with the same filename and MD5 checksum
      coscmd download -rs / D:/examplefolder
      Note:
      Use the -s or --sync parameter to skip identical files that already exist locally when downloading a folder (provided that the downloaded files were uploaded via the COSCMD upload API and the x- cos-meta-md5 header was included).
      Sample: synchronously downloading all files in the root directory of the current bucket while skipping those with the same filename and file size
      coscmd download -rs --skipmd5 / D:/examplefolder
      Sample: Synchronous download and delete "files deleted from the doc path in the COS bucket"
      coscmd download -rs --delete / D:/doc /
      Note:
      For example, if the files in the D drive doc folder and the files under the doc path in COS have been synchronously uploaded on the same day, making the source end and target end identical. The next day, if the user deletes file A under the doc path in COS, executing the above command will delete file A from the D drive doc folder, ultimately keeping the files in the D drive doc folder and the files under the doc path in COS consistent.
      Sample: ignoring .txt or .doc files
      coscmd download -rs / D:/examplefolder --ignore *.txt,*.doc
      Sample: ignoring .txt files
      coscmd download -rs / D:/examplefolder --ignore "*.txt"
      Note:
      When uploading folders, you can ignore certain types of files by using the --ignore parameter, or filter certain types of files by using --include. Multiple shell wildcard rules (separated by commas ,) are supported. To ignore a specified extension, , must be added at the end, or "" must be used to enclose the extension. If "" contains multiple comma-separated rules, the first rule prevails.
      If you want to use --ignore to filter all files in a particular directory, you need to use an absolute path and use "" to enclose the path, for example, coscmd upload -rs D:/doc / --ignore "D:/doc/ignore_folder/*".
      Sample: filtering .txt and .doc files
      coscmd download -rs / D:/examplefolder --include *.txt,*.doc
      Sample: filtering .txt files
      coscmd download -rs / D:/examplefolder --include "*.txt"
      Note:
      Since the old mget API is disused, please use the download API for multipart downloads.

      Getting signed download URLs

      Command syntax
      coscmd signurl <cospath>
      Sample: generating a signed URL for "doc/picture.jpg"
      coscmd signurl doc/picture.jpg
      Sample: generating a signed URL that is effective for 100 seconds for "doc/picture.jpg"
      coscmd signurl doc/picture.jpg -t 100
      Note:
      Replace "cospath" enclosed in "<>" with the COS path of the file for which you need to get the download URL.
      The -t time parameter sets the effective time (in seconds) of the URL signature. The default value is 10000.

      Deleting a file or folder

      Command syntax for deleting a file

      coscmd delete <cospath>
      Note:
      Replace "cospath" enclosed in "<>" with the COS path of the file to delete. You will be prompted to confirm this operation.
      Sample: deleting the "doc/exampleobject.txt" file
      coscmd delete doc/exampleobject.txt
      Sample: deleting files with version IDs
      coscmd delete doc/exampleobject.txt --versionId MTg0NDUxMzc4ODA3NTgyMTErEWN

      Command syntax for deleting a folder

      coscmd delete -r <cospath>
      Sample: deleting the doc folder
      coscmd delete -r doc
      Sample: deleting the folder/doc folder
      coscmd delete -r folder/doc
      Sample: deleting all files with version IDs in the doc directory
      coscmd delete -r doc/ --versions
      Note:
      You need to enter y to confirm a batch delete operation. You can skip this step if the -f parameter is used.
      Note that the delete folder command will delete the current folder as well as the files in it. To delete a versioning-enabled file, you need to specify a version ID.

      Viewing incomplete multipart uploads

      Command syntax
      coscmd listparts <cospath>
      Sample: listing incomplete multipart uploads prefixed with "doc/"
      coscmd listparts doc/

      Aborting incomplete multipart uploads

      Command syntax
      coscmd abort
      Sample: aborting all incomplete multipart uploads
      coscmd abort

      Copying a file or folder

      Command syntax for copying a file

      coscmd copy <sourcepath> <cospath>
      Sample (intra-bucket replication): copying "picture.jpg" in the examplebucket-1250000000 bucket to the "doc" folder
      coscmd -b examplebucket-1250000000 -r ap-chengdu copy examplebucket-1250000000.ap-chengdu.myqcloud.com/picture.jpg doc/
      Sample (cross-bucket replication): copying "doc/picture.jpg" in the examplebucket2-1250000000 bucket to "doc/examplefolder/" in the examplebucket1-1250000000 bucket.
      coscmd -b examplebucket1-1250000000 -r ap-guangzhou copy examplebucket2-1250000000.ap-beijing.myqcloud.com/doc/picture.jpg doc/examplefolder/
      Change the storage class of the file to STANDARD_IA.
      coscmd -b examplebucket1-1250000000 -r ap-guangzhou copy examplebucket2-1250000000.ap-beijing.myqcloud.com/doc/picture.jpg doc/examplefolder/ -H "{'x-cos-storage-class':'STANDARD_IA'}"
      Change the storage class of the file to ARCHIVE and rename it "photo.jpg".
      coscmd -b examplebucket1-1250000000 -r ap-guangzhou copy examplebucket2-1250000000.ap-beijing.myqcloud.com/doc/picture.jpg doc/examplefolder/photo.jpg -H "{'x-cos-storage-class':'Archive'}"

      Command syntax for copying a folder

      coscmd copy -r <sourcepath> <cospath>
      Sample: copying the examplefolder directory in the examplebucket2-1250000000 bucket to the doc directory in the examplebucket1-1250000000 bucket
      coscmd -b examplebucket1-1250000000 -r ap-guangzhou copy -r examplebucket2-1250000000.cos.ap-guangzhou.myqcloud.com/examplefolder doc/
      Note:
      Replace "sourcepath" and "cospath" enclosed in "<>" with the path of the COS file to copy and the COS destination path, respectively.
      The source path is formatted as <BucketName-APPID>.cos.<region>.myqcloud.com/<cospath>.
      Use the -d parameter to set the x-cos-metadata-directive header. Valid values are Copy (default) and Replaced.
      When setting the HTTP header with the -H parameter, use the JSON format, for example, coscmd copy -H -d Replaced "{'x-cos-storage-class':'Archive','Content-Language':'zh-CN'}" <localpath> <cospath>. For more information about the headers, see PUT Object - Copy.

      Moving a file or folder

      Note:
      In a move command, <sourcepath> and <cospath> cannot be the same. Otherwise, files will be deleted. The reason is that the move command copies files first and then deletes them, and the files in the <sourcepath> path are eventually deleted.

      Command syntax for moving a file

      coscmd move <sourcepath> <cospath>
      Sample (intra-bucket movement): moving "picture.jpg" in the examplebucket-1250000000 bucket to the "doc" folder 
      coscmd -b examplebucket-1250000000 -r ap-chengdu move examplebucket-1250000000.ap-chengdu.myqcloud.com/picture.jpg doc/
      Sample (cross-bucket movement): moving "picture.jpg" in the examplebucket2-1250000000 bucket to "doc/folder/" in the examplebucket1-1250000000 bucket
      coscmd -b examplebucket1-1250000000 -r ap-guangzhou move examplebucket2-1250000000.ap-beijing.myqcloud.com/picture.jpg doc/folder/
      Sample: changing the storage class of the file to STANDARD_IA
      coscmd -b examplebucket1-1250000000 -r ap-guangzhou move examplebucket2-1250000000.ap-beijing.myqcloud.com/picture.jpg doc/folder/ -H "{'x-cos-storage-class':'STANDARD_IA'}"
      Sample: changing the storage class of the file to ARCHIVE
      coscmd -b examplebucket1-1250000000 -r ap-guangzhou move examplebucket2-1250000000.ap-beijing.myqcloud.com/data/exampleobject data/examplefolder/exampleobject -H "{'x-cos-storage-class':'Archive'}"

      Command syntax for moving a folder

      coscmd move -r <sourcepath> <cospath>
      Sample: moving the "examplefolder" directory in the examplebucket2-1250000000 bucket to the "doc" directory in the examplebucket1-1250000000 bucket
      coscmd -b examplebucket1-1250000000 -r ap-guangzhou move -r examplebucket2-1250000000.cos.ap-guangzhou.myqcloud.com/examplefolder doc/
      Note:
      Replace "sourcepath" and "cospath" enclosed in "<>" with the path of the COS file to move and the COS destination path, respectively.
      The source path is formatted as <BucketName-APPID>.cos.<region>.myqcloud.com/<cospath>.
      Use the -d parameter to set the x-cos-metadata-directive header. Valid values are Copy (default) and Replaced.
      When setting the HTTP header with the -H parameter, use the JSON format, for example, coscmd move -H -d Replaced "{'x-cos-storage-class':'Archive','Content-Language':'zh-CN'}" <localpath> <cospath>. For more information about the headers, see PUT Object - Copy.

      Setting object access permission

      Command syntax
      coscmd putobjectacl --grant-<permissions> <UIN> <cospath>
      Sample: granting 100000000001 permission to read "picture.jpg"
      coscmd putobjectacl --grant-read 100000000001 picture.jpg
      Sample: querying the file’s access permission
      coscmd getobjectacl picture.jpg

      Enabling/Suspending versioning

      Command syntax
      coscmd putbucketversioning <status>
      Sample: enabling versioning
      coscmd putbucketversioning Enabled
      Sample: suspending versioning
      coscmd putbucketversioning Suspended
      Sample: querying versioning
      coscmd getbucketversioning
      Note:
      Replace "status" enclosed in "<>" with the desired versioning status.
      Once versioning is enabled for the bucket, it cannot return to the prior status (initial status). However, you can suspend versioning for the bucket so that subsequent uploads of objects will not generate multiple versions.

      Restoring an ARCHIVED file

      Command syntax for restoring an archived file
      coscmd restore <cospath>
      Sample: restoring "picture.jpg" using the expedited retrieval mode (effective for 3 days)
      coscmd restore -d 3 -t Expedited picture.jpg
      Command syntax for restoring archived files
      coscmd restore -r <cospath>
      Sample: restoring the "examplefolder/" folder using the expedited retrieval mode (effective for 3 days)
      coscmd restore -r -d 3 -t Expedited examplefolder/
      Note:
      Replace "cospath" enclosed in "<>" with the COS path of the file list to query.
      Use -d <day> to set the validity period of the temporary copy. Default value: 7.
      Use -t <tier> to specify the restoration mode. Enumerated values: Expedited (Expedited retrieval), Standard (Standard retrieval), and Bulk (bulk retrieval). Default value: Standard.

      FAQs

      If you have any questions about COSCMD, see COSCMD.
      Hubungi Kami

      Hubungi tim penjualan atau penasihat bisnis kami untuk membantu bisnis Anda.

      Hubungi Kami
      Dukungan Teknis

      Buka tiket jika Anda mencari bantuan lebih lanjut. Tiket kami tersedia 7x24.

      Kirim Tiket
      Dukungan Telepon 7x24
      Copyright © 2013-2024 Tencent Cloud. All Rights Reserved.
      Kebijakan PrivasiLegalKebijakan Cookie