tencent cloud

PrevNext

masukan

cari berdasarkan kata kunci

Recent Pages

Dokumentasi
Cloud Object Storage
    Dokumentasi
    Download PDF

    Object Lock Overview

    Terakhir diperbarui:2024-03-25 15:33:39
    Unduh PDF

      Overview

      Tencent Cloud Object Storage (COS) offers the object lock function, enabling users to set a retention period during which objects cannot be modified or deleted.
      The object lock function is currently implemented at the object level, allowing users to set a retention period for one or multiple objects. Users can also enable the object lock configuration for a bucket, thereby setting a default object lock for objects newly uploaded to the bucket.
      Note:
      Once an object is set with object lock, it does not support the removal of the object lock, nor does it support the reduction of the retention period. It only permits the extension of the retention period.
      Note:
      Based on the object lock function, COS can meet stringent electronic record retention requirements, including compliance with SEC Rule 17a-4(f), FINRA 4511, CFTC 1.31, and other regulatory standards.
      SEC 17A-4 is a regulation promulgated by the U.S. Securities and Exchange Commission pursuant to the U.S. Securities Exchange Act of 1934. This regulation outlines data retention, indexing, and accessibility requirements applicable to companies engaged in financial securities trading or brokerage businesses, such as stocks, bonds, and futures. According to this regulation, many types of transaction records must be retained and cannot be overwritten or erased, with a period of immediate access within two years and non-immediate access for at least six years.

      Enabling the Object Lock Function for a Bucket

      Before locking an object, you need to enable the write once read many (WORM) function in the bucket. Note that enabling the object lock function merely marks the bucket as the status of "capable of using the object lock function", it does not automatically lock all objects in the bucket. Once the WORM function is enabled for the bucket, users can choose to enable the object lock function for specific objects, or maintain an unlocked state.
      Once the object lock configuration for a bucket is enabled, it cannot be disabled. Buckets with the object lock configuration enabled will be subject to the following restrictions:
      Enabling version control is not supported. If version control is already enabled for the bucket, the object lock configuration cannot be enabled.
      Enabling bucket replication is not supported. This is because bucket replication requires version control to be enabled.
      Enabling intelligent tiering configuration is not supported. If intelligent tiering configuration is already enabled for the bucket, the object lock configuration cannot be enabled.
      The use of append upload is not supported.

      How to Use

      You can enable the object lock configuration for your bucket via APIs.

      Using REST APIs

      Invoke the PUT Bucket ObjectLockConfiguration interface to enable the object lock configuration.

      Setting a Retention Period for an Object

      Retention Period

      Once the object lock function is enabled for a bucket, users can configure a lock retention period for the objects in the bucket. COS stores a timestamp in the object's metadata to denote the expiration of the lock (RetainUntilDate). Before the retention period:
      The object cannot be deleted or modified.
      The storage type of the object cannot be modified.
      The HTTP headers and user metadata of the object cannot be modified, including Content-Type, Content-Encoding, Content-Language, Content-Disposition, Cache-Control, Expires, and x-cos-meta-.
      Users can set the retention period for a specified object. During the object uploading process, the retention period can be configured through the x-cos-object-lock-retain-until-date header; after the object is uploaded, the retention period can be set via the PUT Object Retention interface.
      Users can also set the default configuration for the bucket to automatically configure the retention period during the object uploading process. For more details, refer to the default configuration of the bucket.

      How to Use

      You can set a retention period for an object through APIs.

      Using REST APIs

      Set a retention period for an object during the uploading process.
      Invoke the uploading interfaces (PutObject, InitiateMultipartUploads, and PostObject), and simultaneously pass in the object lock-related headers or form fields. For more details, refer to the following API documentation:
      PUT Object
      POST Object
      Initiate Multipart Upload
      Set a retention period for the object after it is uploaded. For more details, refer to PUT Object Retention.
      View the retention period of the object. For more details, refer to GET Object Retention.

      Setting a Default Retention Period for a Bucket

      COS supports adding a default object lock retention period for a bucket. The period is measured in days. When a user uploads an object without carrying an object lock header, the object will automatically be locked according to the retention period configured in the bucket. However, when a user uploads an object carrying an object lock header, the bucket configuration will be ignored, and the retention period will be set according to the header.
      Note:
      The default retention period for a bucket can be shortened, extended, or disabled.
      Configuring the default retention period for a bucket will only affect subsequently added objects and will not impact the lock status of existing objects.
      The following examples illustrate the impact of the default bucket configuration on the retention period of objects.
      Object Upload Time
      
      Default Bucket Configuration
      
      Header During the Object Uploading Process
      
      Object Lock Expiration Time
      
      2023-01-01T18:30:00Z
      7 days
      
      x-cos-object-lock-retain-until-date: 2023-01-02T18:30:00Z
      2023-01-02T18:30:00Z
      2023-01-01T18:30:00Z
      7 days
      x-cos-object-lock-retain-until-date: 2023-01-20T18:30:00Z
      2023-01-20T18:30:00Z
      2023-01-01T18:30:00Z
      7 days
      Without carrying
      
      2023-01-08T18:30:00Z
      2023-01-01T18:30:00Z
      Unconfigured
      
      x-cos-object-lock-retain-until-date: 2023-01-02T18:30:00Z
      2023-01-02T18:30:00Z
      2023-01-01T18:30:00Z
      Unconfigured
      x-cos-object-lock-retain-until-date: 2023-01-20T18:30:00Z
      2023-01-20T18:30:00Z
      2023-01-01T18:30:00Z
      Unconfigured
      Without carrying
      Unlocked

      How to Use

      You can set the default configuration of object lock for a bucket through APIs.

      REST APIs

      You can manage the object lock directly through the following APIs:
      PUT Bucket ObjectLockConfiguration
      GET Bucket ObjectLockConfiguration

      Limitations

      1. The object lock function is currently only available to customers in the allowlist. For details, contact us.
      2. The object lock function does not support the version control function. Buckets with the object lock function enabled do not support the enabling of version control, and buckets with version control in an enabled or paused state do not support the enabling of the object lock function.
      3. The object lock function does not support the bucket replication function. As the object lock function is not compatible with the version control function, and the source and target buckets must have version control enabled under the bucket replication rules, buckets with the object lock function enabled cannot be used as the source or target buckets for bucket replication.
      4. The object lock function does not support the intelligent tiering function. Buckets with the object lock function enabled do not support the enabling of intelligent tiering configuration, and once the intelligent tiering configuration is enabled in a bucket, it does not support the enabling of the object lock function.
      5. The relationship between the object lock function and lifecycle rules is as follows. When an object is within its retention period, the sedimentation and deletion operations configured in the lifecycle do not take effect; once the retention period of an object expires, the sedimentation and deletion operations configured in the lifecycle can function normally.
      Lifecycle Rule
      Object Lock Retention Period
      Lifecycle Execution Performance
      Object sedimentation after 20 days
      
      30-day retention period
      
      On the 20th day after the upload, the object does not undergo sedimentation. On the 31st day after the upload, the object undergoes sedimentation.
      Object deletion after 20 days
      
      30-day retention period
      On the 20th day after the upload, the object is not deleted. It is deleted on the 31st day after the upload.
      Object sedimentation after 20 days
      10-day retention period
      The object undergoes sedimentation normally 20 days after the upload.
      Object deletion after 20 days
      10-day retention period
      The object is deleted normally 20 days after the upload.
      6. After the object lock function is enabled for a bucket, file fragments are not subject to object lock rules, allowing users to clear file fragments in the bucket.
      7. Once the object lock function is enabled, it cannot be disabled.
      8. After the object lock function is enabled, the bucket and object ACL can be modified.
      Hubungi Kami

      Hubungi tim penjualan atau penasihat bisnis kami untuk membantu bisnis Anda.

      Hubungi Kami
      Dukungan Teknis

      Buka tiket jika Anda mencari bantuan lebih lanjut. Tiket kami tersedia 7x24.

      Kirim Tiket
      Dukungan Telepon 7x24
      Copyright © 2013-2024 Tencent Cloud. All Rights Reserved.
      Kebijakan PrivasiLegalKebijakan Cookie