tencent cloud

PrevNext

Feedback

search by keyword

Recent Pages

Documentation
Tencent Cloud EdgeOne
    Documentation
    Download PDF

    Creating an L4 Proxy Instance

    Last updated: 2024-09-05 14:19:38
    Download PDF

      Use Cases

      This document describes how to create and configure an L4 proxy instance.

      Directions

      1. Log in to the EdgeOne console and click Site List in the left sidebar. In the site list, click the target site.
      2. On the site details page, click L4 proxy.
      3. On the page that appears, click Create L4 proxy instance.
      
      4. Specify parameters on the Service Configurations page. By default, the service region is the accelerated region of the current site. The table below lists the parameters:
      
      Item
      Description
      Instance name
      1–50 characters ([a-z], [0-9] and [-]). It must start and end with a digit or letter. Consecutive hyphens (-) are not allowed. After creation, modifications are not allowed.
      Security Configuration
      Default protection: Enabled by default, for details, please refer to DDoS Protection Overview.
      Exclusive DDoS Protection: For details, please refer to the usage of Exclusive DDoS Protection.
      IPv6 access
      If you enable this feature, EdgeOne nodes can be accessed over the IPv6 protocol.
      Chinese MLC-border acceleration
      When enabled, it will optimize the access performance for Chinese mainland users. For details, please refer to Cross-Regional Secure Acceleration (Overseas Sites).
      Note:
      The Chinese mainland availability zones and global availability zones do not support default protection, but only support exclusive DDoS protection; the global availability zones (excluding the Chinese mainland) support both default protection and exclusive DDoS protection.
      5. View subscription fees, check and agree to the EdgeOne Service Level Agreement and Refund Policy below, and click Subscribe. For billing description, please refer to the Billing overview.
      6. Specify the forwarding rules. On the L4 proxy page, select the newly created L4 proxy instance, click Configuration, enter the instance details page to configure forwarding rules. You can also import multiple forwarding rules at a time. For more information, see Batch Configuring Forwarding Rules. The table below lists the fields of a forwarding rule:
      
      Note:
      1. If you specify Origin group for Origin type, you can specify only self-owned origins. In this case, a COS bucket is not supported as the origin.
      2. You can specify at most 2,000 forwarding rules for each L4 proxy instance.
      Item
      Description
      Rule ID
      Auto-generated, not supported for modification, unique identifier of the rule.
      Forwarding protocol
      Forwarding protocol of L4 proxy. Valid values: TCP and UDP.
      Forwarding port
      The supported port number ranges from 1 to 64999. You can enter multiple ports separated with semicolons (;) or use a hyphen to enter a port range. You can enter up to 20 ports in a forwarding rule.
      The following ports are reserved for internal use, please do not use them:
      For TCP forwarding protocol: 3943, 3944, 6088, 36000, 56000.
      For UDP forwarding protocol: 4789, 4790, 6080, 61708.
      Origin type and Origin address
      Single origin: If you specify Single origin for Origin type, you can enter the IP address or domain name of a single origin.
      Origin group: If you specify Origin group for Origin type, you can select an origin from an existing origin group, or create an origin group.
      Origin port
      You can enter a single port or a port range. If it is a port range, the forwarding port must also be a port range, and the length of the origin port and forwarding port ranges must be consistent.
      For example: If the forwarding port range is 80-90, the origin port range can be 80-90 or 90-100.
      Session persistence
      As long as an origin server IP remains unchanged, traffic from the same client IP will always be forwarded to the same origin server IP.
      Pass client IP
      TOA: Pass client IPs via TCP Option (type 200), which only supports TCP protocols.
      Proxy Protocol V1 (recommended): Pass client IPs as plaintext by using the TCP header, which only supports TCP protocols.
      Proxy Protocol V2: Pass client IPs by using the header. V2 uses the binary format and supports both TCP and UDP protocols. The first packet of each TCP connection carries a PPv2 header, while only the first data packet carries the header for UDP.
      Not passed: Real client IPs will not be transferred.
      Rule Tag
      Optional, you can enter 1-50 any characters to identify the forwarding rule.
      7. Click Save to complete the configuration of the L4 proxy rules.
      Contact Us

      Contact our sales team or business advisors to help your business.

      Contact Us
      Technical Support

      Open a ticket if you're looking for further assistance. Our Ticket is 7x24 avaliable.

      Submit a Ticket
      7x24 Phone Support
      Copyright © 2013-2024 Tencent Cloud. All Rights Reserved.
      Privacy PolicyLegalCookie Policy